Note AcademyNote Academy

Chemistry YCH11 · Chapter 29

Organic nitrogen compounds

Amines, amides, amino acids and proteins, polyamides and other polymers, the preparation and basicity of amines, and diazonium coupling to make azo dyes.

5 min read

Download this chapter (PDF)

Naming

  • Amines have the group −NH2-NH_2 (primary): butylamine (CH3CH2CH2CH2NH2CH_3CH_2CH_2CH_2NH_2), butan-1-amine, phenylamine (C6H5NH2C_6H_5NH_2).
  • Amides have −CONH2-CONH_2: ethanamide (CH3CONH2CH_3CONH_2). An N-substituted amide has an alkyl group on nitrogen: N-methylethanamide.
  • Amino acids have both −NH2-NH_2 and −COOH-COOH: aminoethanoic acid (glycine), 2-aminopropanoic acid (alanine). A α\alpha-amino acid has both on the same carbon, RCH(NH2)COOHRCH(NH_2)COOH.

Amines

Basicity

The nitrogen has a lone pair that accepts H+H^+, so amines are bases.

  • With water: CH3CH2NH2+H2O⇌CH3CH2NH3++OH−CH_3CH_2NH_2 + H_2O \rightleftharpoons CH_3CH_2NH_3^+ + OH^-, an alkaline solution.
  • With acids: CH3CH2NH2+HCl→CH3CH2NH3+Cl−CH_3CH_2NH_2 + HCl \rightarrow CH_3CH_2NH_3^+Cl^-, a salt that dissolves in water.

Small amines are miscible with water because they form hydrogen bonds with it.

Relative basicity: aliphatic amine>NH3>phenylamine\text{aliphatic amine} > NH_3 > \text{phenylamine}.

  • In aliphatic amines the alkyl group pushes electrons towards the nitrogen, increasing its electron density, so the lone pair is more available to accept H+H^+.
  • In phenylamine the lone pair on nitrogen is delocalised into the benzene ring, so it is less available, so phenylamine is a weaker base than ammonia.

Other reactions

ReagentProduct
HalogenoalkaneSecondary amine (and then further substitution to tertiary amines and a quaternary salt)
Ethanoyl chlorideN-substituted amide: CH3CH2NH2+CH3COCl→CH3CONHCH2CH3+HClCH_3CH_2NH_2 + CH_3COCl \rightarrow CH_3CONHCH_2CH_3 + HCl
Copper(II) ionsLigand exchange: a deep blue complex ion [Cu(RNH2)4(H2O)2]2+[Cu(RNH_2)_4(H_2O)_2]^{2+} forms (like ammonia)

Preparation

  • Primary aliphatic amines from halogenoalkanes: heat with an excess of ammonia in ethanol under pressure. Excess ammonia reduces further substitution.
  • By reduction of nitriles: RCN+4[H]→RCH2NH2RCN + 4[H] \rightarrow RCH_2NH_2, using LiAlH4LiAlH_4 in dry ether, or hydrogen with a nickel catalyst.
  • Aromatic amines from nitro compounds by reducing them with tin and concentrated hydrochloric acid (then adding alkali to free the amine from its salt):

C6H5NO2+6[H]→C6H5NH2+2H2OC_6H_5NO_2 + 6[H] \rightarrow C_6H_5NH_2 + 2H_2O

Diazonium ions and azo dyes

Phenylamine reacts with nitrous acid (HNO2HNO_2, made in situ from sodium nitrite and hydrochloric acid) at below 5 °C (ice bath) to form a benzenediazonium ion:

C6H5NH2+HNO2+HCl→C6H5N2+Cl−+2H2OC_6H_5NH_2 + HNO_2 + HCl \rightarrow C_6H_5N_2^+Cl^- + 2H_2O

The diazonium ion is unstable above 5 °C and decomposes to give nitrogen and phenol.

It undergoes a coupling reaction with an alkaline solution of phenol (or another aromatic compound activated by an −OH-OH or −NH2-NH_2 group) to form an azo compound, which has the azo group −N=N−-N=N- joining two benzene rings. Azo compounds are strongly coloured (yellow, orange or red) because of an extended delocalised system, and are used as dyes.

Amides

Amides can be prepared from acyl chlorides, with concentrated ammonia (primary amides) or with amines (N-substituted amides).

Polymers

Condensation polymers: polyamides

Polyamides form from a dicarboxylic acid (or diacyl chloride) and a diamine, with loss of H2OH_2O (or HCl) at each amide (peptide) link, −CONH−-CONH-.

Nylon-6,6 is made from hexane-1,6-diamine and hexanedioic acid (or hexanedioyl dichloride, which is more reactive and makes the reaction fast at room temperature):

n H2N(CH2)6NH2+n ClOC(CH2)4COCl→[−HN(CH2)6NHCO(CH2)4CO−]n+2n HCln\,H_2N(CH_2)_6NH_2 + n\,ClOC(CH_2)_4COCl \rightarrow [-HN(CH_2)_6NHCO(CH_2)_4CO-]_n + 2n\,HCl

The polymer has hydrogen bonds between chains (between N−HN-H and C=OC=O) and strong London forces, giving strength, high melting temperature and resistance to stretching, so it can be used for fibres, ropes and clothing.

Proteins are polyamides of amino acids, formed in the same way.

Addition polymers with hydrogen bonding

  • Poly(propenamide) from CH2=CHCONH2CH_2=CHCONH_2. Repeat unit [−CH2−CH(CONH2)−][-CH_2-CH(CONH_2)-].
  • Poly(ethenol) from (indirectly) hydrolysis of poly(ethenyl ethanoate). Repeat unit [−CH2−CH(OH)−][-CH_2-CH(OH)-]. It is soluble in water because the −OH-OH groups form hydrogen bonds with water. It is used for soluble laundry bags and liquid-detergent capsules (liquitabs).

Amino acids

An amino acid contains a basic −NH2-NH_2 group and an acidic −COOH-COOH group. In the solid state and in solution near neutral pH, it exists as a zwitterion, +H3N−CHR−COO−^+H_3N-CHR-COO^-, which has both a positive and a negative charge but no overall charge. This explains why amino acids are soluble in water and have high melting temperatures, like ionic compounds.

ConditionForm
Acid (low pH)+H3N−CHR−COOH^+H_3N-CHR-COOH (cation)
Neutral+H3N−CHR−COO−^+H_3N-CHR-COO^- (zwitterion)
Alkali (high pH)H2N−CHR−COO−H_2N-CHR-COO^- (anion)
  • Amino acids (except glycine) have a chiral carbon, so they are optically active.
  • They form peptide bonds by condensation: H2NCH2COOH+H2NCH2COOH→H2NCH2CONHCH2COOH+H2OH_2NCH_2COOH + H_2NCH_2COOH \rightarrow H_2NCH_2CONHCH_2COOH + H_2O. A dipeptide forms, and a long chain is a polypeptide (protein).

H2NCH2−CO−NH−CH(CH3)−COOHH_2NCH_2-CO-NH-CH(CH_3)-COOH. The −CONH−-CONH- link is the peptide bond.

Core Practical 15 is an analysis of inorganic and organic unknowns using the tests in this specification.

Test yourself10 flashcards on this chapter.Flashcards →

These notes are AI generated and may contain mistakes. Check them against your syllabus.