Note AcademyNote Academy

Chemistry (AS & A Level) 9701 · Chapter 21

Organic synthesis

Identifying functional groups from reactions, predicting reactions of molecules with several functional groups, and planning and analysing multi-step synthetic routes from the AS Level reactions.

Written for the 2025–2027 syllabus · 9 min read

Download this chapter (PDF)

21.1 Organic synthesis

Identifying functional groups

Use the characteristic tests and reactions:

ObservationFunctional group
Decolourises aqueous bromineC=C
Orange precipitate with 2,4-DNPHC=O (aldehyde or ketone)
Silver mirror (Tollens') or red precipitate (Fehling's)aldehyde
Orange to green with acidified K2Cr2O7K_2Cr_2O_7, warmprimary or secondary alcohol (or aldehyde)
Yellow precipitate with alkaline iodineCH3CO−CH_3CO{-} or CH3CH(OH)−CH_3CH(OH){-}
Effervescence with Na2CO3Na_2CO_3–COOH
Hydrogen released with Na(s)–OH (or –COOH)
Precipitate with warm AgNO3AgNO_3 in ethanolhalogenoalkane
Hydrolysed by NaOH (aq) to an acid salt and an alcoholester

For a molecule with several functional groups (for example a hydroxy acid or an unsaturated aldehyde), each group reacts as it would on its own, so you can predict the reactions and properties by treating each group in turn. Choose reagents carefully: LiAlH4LiAlH_4 reduces C=O but not C=C, whereas H2H_2/Ni reduces both.

Reaction map (AS Level)

  • Alkane → halogenoalkane: Cl2Cl_2 or Br2Br_2, UV light.
  • Alkene → halogenoalkane: HX, room temperature. Alkene → alcohol: steam, H3PO4H_3PO_4. Alkene → diol: cold KMnO4KMnO_4.
  • Halogenoalkane → alcohol: NaOH(aq), heat. → nitrile: KCN, ethanol, heat. → amine: NH3NH_3/ethanol, pressure. → alkene: NaOH in ethanol, heat.
  • Alcohol → alkene: heated Al2O3Al_2O_3 or concentrated H2SO4H_2SO_4. → halogenoalkane: PCl5PCl_5 or HX. → aldehyde: dichromate, distil. → ketone (secondary): dichromate. → acid: dichromate, reflux. → ester: carboxylic acid, H2SO4H_2SO_4.
  • Aldehyde/ketone → alcohol: NaBH4NaBH_4 or LiAlH4LiAlH_4. → hydroxynitrile: HCN, KCN.
  • Nitrile → carboxylic acid: dilute acid or alkali, heat. Ester → acid + alcohol: hydrolysis.

Planning a route

  1. Compare the starting material and the target: what has changed (the carbon chain, the functional group, or both)?
  2. Work backwards from the target (retrosynthesis).
  3. Check each step for the correct reagents and conditions, possible by-products and yield.

Ethanoic acid: ethene + steam with H3PO4H_3PO_4 catalyst gives ethanol; reflux the ethanol with excess acidified K2Cr2O7K_2Cr_2O_7 to give ethanoic acid. Propanoic acid needs one more carbon: ethene + HBr gives bromoethane; KCN in ethanol, heat gives propanenitrile; reflux with dilute HCl gives propanoic acid.

Analysing a route

For each step state the type of reaction (substitution, addition, elimination, oxidation, reduction, condensation, hydrolysis), the reagents and conditions, and likely by-products (for example, a mixture from free-radical substitution, or an elimination product alongside substitution of a halogenoalkane).

Start with the carbon skeleton

Write structures for the starting material and target, count their carbons and mark the functional groups. If the target has an extra carbon, an ordinary oxidation, reduction or hydroxide substitution will not create it. Cyanide substitution or carbonyl addition can supply a new carbon. If the carbon count is unchanged, first look for a direct functional-group conversion before proposing unnecessary chain-building steps.

Worked example: propan-1-ol to propanoic acid requires oxidation under reflux with excess suitable acidified oxidant. Propan-1-ol to butanoic acid needs chain extension: convert OH to a leaving group, substitute with cyanide to form butanenitrile, then hydrolyse. Merely “oxidise further” cannot add the fourth carbon.

Work backwards through specific intermediates

A target alcohol could come from carbonyl reduction, alkene hydration or halogenoalkane hydrolysis, but these routes may differ in positional selectivity. A target carboxylic acid could come from a primary alcohol, aldehyde, nitrile or ester. Choose an intermediate whose structure matches the target rather than naming a broad class only.

Worked route: ethene to ethyl ethanoate requires an acid fragment and an alcohol fragment. Hydrate ethene to ethanol, retain part of the ethanol and oxidise another portion under reflux to ethanoic acid. Esterify the acid with retained ethanol using an acid catalyst and heat. If all ethanol were oxidised first, the proposed final mixture would lack the required alcohol unless a further supply were added.

Answer: Heat bromoethane with ethanolic hydroxide to eliminate HBr and form ethene. Hydrate ethene with steam and a phosphoric-acid catalyst under suitable conditions. Aqueous hydroxide in the first step would instead favour direct substitution.

Reagents are incomplete without conditions

For primary alcohol oxidation, distillation favours aldehyde collection, whereas reflux with excess oxidant gives acid. For halogenoalkane reactions, aqueous versus ethanolic hydroxide distinguishes preferred substitution and elimination. For nitrile or ester hydrolysis, alkaline conditions initially give a salt; acidification must be stated if the target is a free acid.

Worked correction: “Bromoethane, NaOH, propanoic acid” cannot be completed as a one-step route. NaOH does not add carbon, and substitution would give ethanol. The correct chain-extension reagent is cyanide in a suitable solvent with heat, followed by nitrile hydrolysis. Check atom accounting before polishing reagent names.

Answer: Acidification of the carboxylate salt after hydrolysis. The strongly alkaline mixture contains mainly carboxylate, not free acid.

Multifunctional compounds require selectivity

Mark every reactive group before applying a reagent. A molecule containing an alkene and an aldehyde can undergo addition at C=C or nucleophilic addition/reduction at C=O. Sodium borohydride generally reduces the carbonyl while leaving an ordinary isolated C=C unchanged under standard syllabus conditions. Hydrogenation selectivity depends on catalyst and conditions; do not assume every functional group is inevitably reduced equally.

Worked example: CH2=CHCHOCH_2=CHCHO reduced with suitable NaBH4NaBH_4 conditions gives CH2=CHCH2OHCH_2=CHCH_2OH, retaining alkene. Strong oxidative treatment could affect both the aldehyde and the double bond, so it is a less selective option if preserving C=C is required. For a hydroxy acid, sodium metal can react with acidic hydrogens in both OH-containing groups; gas stoichiometry therefore needs attention to the complete structure.

Answer: NaBH4NaBH_4 under appropriate conditions. LiAlH4LiAlH_4 is a stronger reagent that can also reduce the carboxylic acid, so it is less suitable for that selectivity goal.

Identification is an evidence problem

Treat a test result as a constraint rather than an automatic complete structure. Bromine decolourisation is compatible with C=C but later aromatic groups can also react. Sodium releases hydrogen from both alcohols and acids. DNPH detects aldehyde/ketone functionality but does not distinguish them. Negative tests are valuable when the reagent and conditions are appropriate and a reliable positive control exists.

Worked identification: C4H8OC_4H_8O gives DNPH precipitate, no Tollens' response and positive iodoform. DNPH supplies the carbonyl constraint, negative Tollens' supports a ketone, and iodoform requires a methyl-carbonyl group. Butanone fits all three and the molecular formula. Butanal fits the formula and DNPH but fails the other constraints.

Yield and route evaluation

For consecutive independent stages, multiply fractional yields. Two 80.0% steps give 0.8002=64.0%0.800^2=64.0\% overall, not 160% or 80%. More steps often reduce material recovery and increase purification demands, even when each transformation is chemically plausible. A short route is useful only if it gives the required connectivity and manageable selectivity.

Worked calculation: starting with 0.100 mol, stage yields of 75.0%, 80.0% and 90.0% leave 0.100(0.750)(0.800)(0.900)=0.05400.100(0.750)(0.800)(0.900)=0.0540 mol final product, or 54.0% overall. Use stoichiometric coefficients as well if any step is not 1 : 1.

Answer: 0.200(0.600)(0.500)=0.06000.200(0.600)(0.500)=0.0600 mol, corresponding to 30.0% overall yield.

Chapter check: draw every intermediate, balance carbon count, state conditions, check competing functional groups and calculate cumulative yield. Use the reaction chapters as a reference rather than treating a reaction map as an unexplained list.

References and further reading

Scope follows section 21 of the Cambridge 9701 syllabus for 2025–2027. Chemguide’s Cambridge topic index links to alternative explanations. The worked exercises and added diagrams are original teaching examples; numerical examples are illustrative unless a specific source is identified.

Test yourself5 flashcards on this chapter.Flashcards →

Practise this chapter

Every past-paper question on these topics, with the mark scheme.

These notes are AI generated and may contain mistakes. Check them against your syllabus.