11.1 Physical properties of the Group 17 elements
| Element | Colour and state at room temperature |
|---|---|
| Chlorine, | pale yellow-green gas |
| Bromine, | red-brown liquid (orange-brown vapour) |
| Iodine, | grey-black solid (purple vapour) |
- Volatility decreases down the group: boiling points increase. The molecules become larger with more electrons, so the instantaneous dipole–induced dipole forces between them are stronger and more energy is needed to separate them.
- The bond strength of the X–X bond decreases from to (the bonding pair is further from the nuclei and shielded by more electrons, so the attraction is weaker; is unusually weak because of lone-pair repulsion).
Intermolecular attractions and bond breaking are separate
Boiling a halogen separates molecules; it does not split them into atoms. Its boiling-point trend is therefore explained by intermolecular dispersion forces, not the covalent X–X bond energy. Down the group larger electron clouds are more polarizable, strengthening these attractions. The weakening X–X bond is relevant to chemical reactions, a different process.
Worked comparison: iodine is a solid at room temperature while chlorine is gaseous because considerably more energy is needed to overcome attractions between molecules. This does not mean an I–I bond is stronger than a Cl–Cl bond. Always state which attraction is being overcome.
Answer: Sublimation mainly separates molecules from one another. Their covalent I–I bonds remain, so the vapour is molecular iodine.
11.2 The chemical properties of the halogen elements and the hydrogen halides
Oxidising power
The halogens are oxidising agents, and the oxidising power decreases down the group (). Each halogen displaces a less reactive one from a solution of its halide:
Observation: chlorine water turns a bromide solution orange and an iodide solution brown.
Reaction with hydrogen
explodes even in the dark. explodes in sunlight. is slower and needs heating. is slow, reversible and only partial. The reactivity decreases down the group because the H–X bond formed gets weaker, so less energy is released.
Thermal stability of the hydrogen halides
Stability decreases down the group: HCl is very stable, HI decomposes on heating. The H–X bond becomes longer and weaker, so less energy is needed to break it.
Predicting a displacement from electron transfer
A halogen acts as an oxidising agent by gaining electrons, . Chlorine can accept electrons from bromide or iodide; iodine cannot normally oxidise chloride under the same aqueous conditions. The reverse sequence applies to the reducing ability of halide ions. Do not compare the oxidising power of with the reducing power of as though they were the same species.
Worked example: add bromine water to potassium iodide. The ionic equation is . Potassium ions are spectators. Brown aqueous iodine, or violet iodine in a suitable non-polar solvent layer, supports the reaction. Adding bromine to chloride does not give the analogous displacement; the original bromine colour may remain.
For hydrogen halides, the decreasing H–X bond strength makes thermal decomposition easier down the group. Distinguish a hydrogen halide gas from its aqueous acid: the gas consists mainly of molecules, while water enables ionisation. A trend in thermal stability is about bond breaking and does not by itself state the concentration or pH of an aqueous sample.
Answer: and . Chlorine gains electrons while iodide loses them; electrons cancel when the equations are added.
11.3 Some reactions of the halide ions
Reducing power
The halide ions act as reducing agents, and the reducing power increases down the group (), as the larger ion loses an electron more easily.
Reaction with concentrated sulfuric acid
- (steamy white fumes of HCl). Cl⁻ is too weak a reducing agent to reduce the acid.
- also gives HBr, but HBr then reduces some : (orange-brown and choking ).
- reduces the sulfur further, to , solid sulfur (yellow) and even (rotten-egg smell): , giving purple iodine vapour.
Test with silver nitrate
Acidify with dilute nitric acid, add aqueous silver nitrate, then aqueous ammonia:
| Halide | Precipitate | Dilute | Concentrated |
|---|---|---|---|
| white | dissolves | dissolves | |
| cream | insoluble | dissolves | |
| yellow | insoluble | insoluble |
. (You do not need the formula of the complex.) The solubility in ammonia decreases from AgCl to AgI.
Separating acid–base and redox steps with sulfuric acid
The initial reaction of a solid sodium halide with concentrated sulfuric acid can produce a hydrogen halide by acid–base chemistry. For bromide and iodide, subsequent electron transfer reduces sulfur from +6 to lower oxidation states. The halide is oxidised to the halogen. Chloride is too weak a reducing agent for the comparable redox step, so observing HCl fumes is not evidence that sulfuric acid was reduced.
For sulfur dioxide sulfur is +4, for sulfur it is 0, and for hydrogen sulfide it is −2. The greater reducing power of iodide permits deeper reductions. Several products can coexist, so avoid presenting one balanced equation as a guarantee of a pure single product in the test mixture.
Worked example: in , two bromides each lose one electron. Sulfur gains two electrons as it changes +6 to +4. In the hydrogen-sulfide equation, sulfur gains eight electrons, matching oxidation of eight iodides to four iodine molecules.
A defensible silver-halide identification
Use separate portions where other tests might introduce contaminating ions. Acidify with nitric acid before silver nitrate: hydrochloric acid would supply chloride and produce a false positive. The acid removes carbonate or hydroxide interferences. Record precipitate colour, then test ammonia solubility; a colour judgement alone is less reliable for pale or mixed precipitates.
Silver chloride dissolves in dilute ammonia because complex formation removes free silver ions and shifts dissolution equilibrium. Silver bromide requires more concentrated ammonia, whereas silver iodide remains insoluble under the usual test conditions. Dissolving a precipitate and bleaching a coloured solution are different observations; use precise wording.
Answer: Bromide, through formation of AgBr. Both colour and ammonia behaviour support the identification. The reagent must not have introduced bromide itself.
11.4 The reactions of chlorine
Chlorine with sodium hydroxide: disproportionation
- Cold, dilute NaOH: . Chlorine goes from 0 to −1 (in ) and to +1 (in ).
- Hot, concentrated NaOH: . Chlorine goes from 0 to −1 and to +5 (in ).
Both are disproportionation reactions: the same element is oxidised and reduced.
Chlorine in water purification
Chlorine reacts with water: (or ). The chloric(I) acid and its ion are the active species that kill bacteria. Adding chlorine to water is cheap and effective, but has risks (toxic chlorine, possible chlorinated organic compounds).
Why conditions change the disproportionation products
Cold dilute alkali gives chlorate(I), while hot concentrated alkali gives chlorate(V). Determine the oxidation number before naming the product. contains chlorine +1; contains chlorine +5. Both also produce chloride, −1. The hot reaction's 5 : 1 chloride-to-chlorate(V) ratio balances electrons: one chlorine loses five electrons while five chlorines each gain one.
Worked calculation: for complete cold-alkali reaction, 0.0200 mol consumes 0.0400 mol NaOH and produces 0.0200 mol each NaCl and NaClO. Under hot concentrated conditions, the same chlorine amount would give mol NaClO₃ according to the stated equation, not 0.0200 mol.
Water treatment balances the benefit of reducing waterborne infection against controlled risks from chlorine handling and reaction by-products. Explain the disinfecting species through the equilibrium producing HOCl and its conjugate base, rather than claiming dissolved chloride ions sterilise water. Chlorine and chloride are chemically different.
Answer: Yes. Chlorine starts at 0 in and becomes −1 in HCl and +1 in HOCl. The same starting element is reduced and oxidised.
Chapter check: distinguish halogen from halide, intermolecular attraction from covalent bond energy, and acid–base gas formation from the later redox step. Use oxidation-number methods to check all equations.
References and further reading
Scope follows section 11 of the Cambridge 9701 syllabus for 2025–2027. Chemguide’s Cambridge topic index links to alternative explanations. The worked exercises and added diagrams are original teaching examples; numerical examples are illustrative unless a specific source is identified.
Practise this chapter
Every past-paper question on these topics, with the mark scheme.
These notes are AI generated and may contain mistakes. Check them against your syllabus.

