28.1 General physical and chemical properties of the first row of transition elements, titanium to copper
A transition element is a d-block element which forms one or more stable ions with incomplete d orbitals. Scandium and zinc are not transition elements: has no d electrons and has a full .
The shapes of two of the five orbitals: the has four lobes lying between the and axes; the has two lobes along the axis and a ring (torus) in the plane.
Properties
- Variable oxidation states, because the and sub-shells are close in energy, so electrons from both can be lost.
- Catalysts, because they have more than one stable oxidation state (they can gain and lose electrons easily) and have vacant d orbitals that are energetically accessible, so reactants can form dative bonds with them (adsorption).
- Complex ions, because of vacant low-energy d orbitals that accept lone pairs from ligands.
- Coloured compounds (see 28.3).
Common oxidation states: Ti +4, V +2 to +5, Cr +3 and +6, Mn +2, +4 and +7, Fe +2 and +3, Co +2 and +3, Ni +2, Cu +1 and +2.
Apply the definition to the ions actually formed
Being in the d block and being a transition element are related but not identical criteria. Apply the syllabus definition to stable ions with incomplete d sub-shells. Zinc commonly forms with , while scandium commonly forms with . Copper qualifies because has , even though neutral copper has a filled 3d sub-shell.
Worked example: neutral iron is . Its 2+ ion is and its 3+ ion is : remove 4s electrons before 3d. Both ions have incomplete d sub-shells. This configuration work connects directly to variable oxidation states, magnetism and the simplified d–d explanation of colour.
Transition metals commonly have relatively high densities and melting points because of their structures and metallic bonding, but the detailed values are not perfectly uniform. When explaining catalysis, distinguish changing oxidation states in a redox cycle from adsorption on a metal surface; both can provide a lower-barrier route through different mechanisms.
Answer: Copper also forms stable ions with an incomplete sub-shell. The definition requires at least one suitable stable ion, not every ion to be incomplete.
28.2 General characteristic chemical properties of the first set of transition elements, titanium to copper
Complex ions and ligands
- A ligand is a species with a lone pair of electrons that forms a dative covalent bond to a central metal atom or ion.
- A complex is a molecule or ion with a central metal atom or ion surrounded by ligands.
- The coordination number is the number of dative bonds to the metal.
- Monodentate ligands donate one pair: , , , . Bidentate ligands donate two pairs: 1,2-diaminoethane (en, ) and the ethanedioate ion . Polydentate ligands donate more: (six).
The charge on a complex is the sum of the metal charge and the ligand charges. : Fe is +3 with six . : Cu is +2 with four .
Geometry
| Coordination number | Shape | Angle | Example |
|---|---|---|---|
| 2 | linear | 180° | |
| 4 | tetrahedral | 109.5° | |
| 4 | square planar | 90° | |
| 6 | octahedral | 90° |
Ligand exchange
One ligand is replaced by another. For copper(II) and cobalt(II) ions:
| Reaction | Observation |
|---|---|
| + a little or | pale blue precipitate of |
| ... then excess | deep blue solution, |
| + concentrated HCl | yellow-green solution, |
| (pink) + a little or | blue precipitate of |
| ... then excess | brown or straw-coloured solution, (darkens in air as is oxidised) |
| + concentrated HCl | blue solution, |
In these examples, chloride replacement can change coordination number from six to four and produce a tetrahedral complex. Ligand size contributes, but geometry is not determined by size alone. The water ligands in are the two that remain after four waters have been replaced.
Redox reactions and titrations
Use values to predict the feasibility of reactions of transition elements and their ions.
- with in acid: . Self-indicating: the purple is added from the burette and decolourises until the end-point, where the first permanent pink appears.
- with ethanedioate (warm, acid): . The reaction is autocatalysed by .
- with : . The iodine produced is titrated with sodium thiosulfate, , using starch added near the end-point (blue-black to colourless), so one mole of is formed per two moles of .
Moles ; that mol; mol dm⁻³.
Distinguish precipitation, ligand exchange and redox
A little ammonia supplies hydroxide through its weak-base reaction with water, so a metal hydroxide can precipitate. In excess ammonia, some precipitates dissolve because ammine complexes form. These are different chemical steps. For copper, the deep blue solution is evidence of a changed coordination environment rather than a change from copper(II) to copper(I).
Useful simplified equations are and . Charges and ligand counts are conserved. Chloride replacement can instead change coordination number: .
Complex geometry is not decided by ligand size alone. Metal identity, oxidation state, ligand properties and electronic factors matter; square-planar four-coordinate examples demonstrate why “four ligands always means tetrahedral” is wrong. For chelating ligands count donor atoms/bonds, not ligand molecules. Three bidentate ligands can give coordination number six.
Worked example: contains three neutral en molecules, each binding through two nitrogens. The coordination number is six and cobalt's oxidation number is +3. For , three 2− ligands contribute −6, so iron must be +3 to give total −3.
Answer: Both ligand types are neutral, so nickel is +2. Two en ligands donate four pairs and two waters donate two more, giving coordination number six, not four.
Redox titrations: from endpoint to stoichiometry
Start with the balanced redox equation, not an assumed 1 : 1 volume ratio. Acidified manganate(VII) titrations require suitable acid conditions; sulfuric acid is commonly used because chloride can itself be oxidised in sufficiently oxidising mixtures. Add manganate(VII) until a faint permanent pink remains, showing a slight excess beyond consumption by the reducing agent.
In copper iodometry, excess iodide produces iodine and a white copper(I) iodide precipitate. The liberated iodine is measured with thiosulfate. Combining the two equations shows one mole corresponds to one mole thiosulfate overall, although iodine itself reacts with two moles thiosulfate. Derive this relationship rather than confusing the two stages.
Worked example: a sample liberates iodine requiring 18.0 cm³ of 0.100 mol dm⁻³ thiosulfate. Thiosulfate amount is 0.00180 mol, iodine amount 0.000900 mol and original amount 0.00180 mol. If the copper sample volume was 25.0 cm³, its concentration was 0.0720 mol dm⁻³. Starch is added near the endpoint, and loss of the blue-black colour indicates iodine has been consumed.
28.3 Colour of complexes
In an isolated atom the five orbitals are degenerate (equal in energy). In a complex the ligands' lone pairs repel the d electrons, splitting them into two non-degenerate sets with an energy gap :
- Octahedral: three lower (, , ) and two higher (, ).
- Tetrahedral: two lower and three higher.
An electron absorbs light of energy (frequency ) and is promoted from the lower to the higher set (a d–d transition). The light not absorbed, the complementary colour, is seen. A complex with an empty or full d sub-shell (, , ) has no d–d transition, so it is colourless.
Changing the ligand changes , hence the colour: is pale blue and is deep blue (ammonia gives a larger , so it absorbs light of a higher frequency); is yellow.
What the colour model does and does not predict
Ligand interactions split otherwise equal-energy d orbitals. A suitable electron absorbs a photon matching the gap and is promoted between the split levels. The observed transmitted/reflected light is complementary to absorbed wavelengths. Changing the ligand can change the gap without changing the metal oxidation number; oxidising the metal can also change the gap and electron configuration.
Within the simple d–d model, and ions lack the required partially filled levels for such transitions. This does not mean every compound containing them is colourless: charge-transfer processes or coloured ligands can produce colour by other routes. Likewise, coloured manganate(VII), with manganese(VII) formally , should not be explained by a routine d–d transition.
Worked example: if a ligand change increases , then from , absorbed frequency increases and wavelength decreases. This statement concerns absorbed light, not a simplistic rule that the visible solution must become “more blue”. A real colour depends on the absorption pattern.
Answer: Ligand exchange changes the d-orbital splitting and wavelengths absorbed. Copper can remain in oxidation state +2 throughout, so colour change alone does not prove redox.
28.4 Stereoisomerism in transition element complexes
- Geometrical (cis/trans): the square planar (cis has the two adjacent at 90°, and trans opposite at 180°), and octahedral and (the two water ligands cis or trans).
- Optical: an octahedral complex with bidentate ligands, for example and cis-, has non-superimposable mirror images (enantiomers).
Polarity: a symmetrical complex whose bond dipoles cancel is non-polar (trans-); a complex that has the dipoles in the same direction is polar (the cis isomer; this is the anti-cancer drug cisplatin).
Recognising geometrical and optical isomers
For square-planar , cis has the two chlorides adjacent and trans has them opposite. Rotating the whole diagram does not create a new isomer: compare relative positions of ligands. An octahedral complex with two distinguishable ligands among four others can similarly allow adjacent and opposite arrangements.
Optical isomers are mirror images that cannot be superimposed by rotation. Three bidentate ligands can wrap around an octahedral centre in two handed arrangements. The presence of a carbon atom with four different groups is not required: the entire coordination arrangement can be chiral. A drawing must make the three-dimensional arrangement clear with appropriate projection conventions.
Answer: They may simply be rotated drawings of the same trans arrangement. Isomerism requires a different arrangement that cannot be made identical by rotating the whole object.
28.5 Stability constants, Kstab
The stability constant, , is the equilibrium constant for the formation of the complex ion from its constituent ions or molecules in a solvent. The concentration of water is not included.
units mol⁻⁴ dm¹².
- A large means the complex is stable, because the equilibrium lies to the right.
- Ligand exchange goes in the direction of the larger : ammonia replaces water in the copper complex because the ammine complex has the larger ; EDTA replaces many ligands (a very large , aided by a gain in entropy as more particles are released).
mol⁻⁴ dm¹².
Using stability constants with equilibrium reasoning
Write the formation equilibrium before the expression, omit the pure solvent, and raise each free-ligand concentration to its coefficient. A large value favours complex formation under the specified conditions. Comparing constants is most direct for comparable equations and conventions; an observed ligand exchange also depends on concentrations, so a very large excess of one ligand can shift the balance.
Worked example: for , . If complex concentration is 0.0200, free metal concentration and free ligand concentration 0.100 mol dm⁻³, the constant is dm⁶ mol⁻². Use free ligand at equilibrium, not total ligand originally added, when the difference matters.
Chapter check: count donor atoms, balance ligand-exchange equations, distinguish colour change from redox, and separate equilibrium stability from reaction speed. Link quantitative work to equilibria and electrode potentials.
References and further reading
Scope follows section 28 of the Cambridge 9701 syllabus for 2025–2027. Chemguide’s Cambridge topic index links to alternative explanations. The worked exercises and added diagrams are original teaching examples; numerical examples are illustrative unless a specific source is identified.
Practise this chapter
Every past-paper question on these topics, with the mark scheme.
- 28.1General physical and chemical properties of the first row of transition elements, titanium to26 questions
- 28.2General characteristic chemical properties of the first set of transition elements, titanium to41 questions
- 28.3Colour of complexes5 questions
- 28.4Stereoisomerism in transition element complexes2 questions
- 28.5Stability constants, Kstab2 questions
These notes are AI generated and may contain mistakes. Check them against your syllabus.

