34.1 Primary and secondary amines
Preparation of amines
- Halogenoalkane + ammonia (excess, in ethanol, heated under pressure) gives a primary amine.
- Halogenoalkane + a primary amine (ethanol, heated in a sealed tube or under pressure) gives a secondary amine: .
- Reduction of an amide with in dry ether: .
- Reduction of a nitrile with or with and a Ni catalyst: .
Condensation with acyl chlorides
Ammonia or an amine reacts with an acyl chloride at room temperature to give an amide (see Acyl chlorides).
Basicity
An amine has a lone pair on nitrogen which accepts a proton, so it is a weak base: . Amines react with acids to form salts: , and are displaced from the salts by NaOH.
Track nitrogen and carbon through reductions
Nitrile reduction converts into without adding carbon. Amide reduction converts the carbonyl carbon into while retaining its bond to nitrogen. These transformations differ from hydrolysis, which separates the nitrogen-containing part from the acyl carbon skeleton.
Worked comparison: ethanenitrile, , gives ethylamine on reduction. Ethanamide, , also gives ethylamine, but on hydrolysis gives ethanoic acid/carboxylate plus an ammonium/ammonia product. In both reductions the two starting carbons remain in the amine. Do not treat nitrile reduction as an additional carbon-extension step: the extra carbon was introduced earlier when cyanide was used.
With a primary amine and a halogenoalkane, nitrogen alkylation can give a secondary amine, while reaction with an acyl chloride gives an amide. These products must not be confused. can form , whereas forms with an N–C=O connection.
Answer: Propan-1-amine, , containing three carbons. The amide carbonyl becomes rather than being lost.
34.2 Phenylamine and azo compounds
Preparation of phenylamine
- Nitrate benzene with concentrated / (25–60 °C) to give nitrobenzene.
- Reduce with hot tin and concentrated HCl (Sn/conc. HCl), which gives the phenylammonium salt.
- Add NaOH(aq) to liberate phenylamine, .
Reactions of phenylamine
- With (aq) at room temperature: a white precipitate of 2,4,6-tribromophenylamine (the ring is activated by the lone pair on N).
- With (from and dilute HCl) below 10 °C: the diazonium salt . Warming this with water gives phenol and .
Azo compounds
The benzenediazonium ion reacts with phenol dissolved in NaOH(aq) (below 10 °C), coupling to form an azo compound, with the –N=N– group linking two rings, in a bright yellow-orange colour. Azo compounds are strongly coloured because the –N=N– group extends the delocalised system across both rings, and they are used as dyes (other dyes are made by coupling with other aromatic compounds). The diazonium salt must be kept cold, since it decomposes to phenol and nitrogen at higher temperatures.
Relative basicity
Ethylamine > ammonia > phenylamine (in aqueous solution).
- Ethylamine: the alkyl group is electron-donating, which increases the electron density on N and makes the lone pair more available.
- Ammonia: the reference.
- Phenylamine: the lone pair on N is delocalised into the benzene ring, so it is less available to accept a proton.
Phenylamine preparation needs a work-up
Tin and concentrated acid reduce the nitro group, but the acidic mixture protonates the amine. Adding hydroxide liberates neutral phenylamine from its phenylammonium salt. A route ending at the acidic reduction mixture has not yet isolated the same free-base product. Keep the aromatic ring and carbon count unchanged through nitro-to-amino reduction.
The NH₂ lone pair both increases ring electron density and becomes less available for accepting a proton. These effects explain an apparent contrast: phenylamine is more reactive towards ring electrophiles than benzene but less basic at nitrogen than an alkylamine. Electron donation into the ring strengthens one type of reactivity while reducing another.
Worked example: phenylamine with bromine water gives ring substitution at 2,4,6 and a white precipitate. Phenylamine with HCl instead undergoes protonation at nitrogen. Identifying the reactive site explains why the same molecule behaves differently with the two reagents.
Answer: Ethyl donation makes the nitrogen pair more available than in ammonia. In phenylamine the pair overlaps with the aromatic system and is less available for proton acceptance. In more elaborate comparisons, aqueous solvation also matters; this simple order should not be expanded into a universal ranking of every amine.
Diazotisation and azo coupling are separate stages
Generate nitrous acid in the cold using sodium nitrite and dilute acid. Keep the diazonium solution cold until the next reagent is ready. Coupling with alkaline phenol creates an N=N link to an electron-rich ring, commonly at an available para position. Warming with water instead produces phenol and nitrogen gas, so temperature choice controls a competing pathway.
The azo group extends conjugation across aromatic units. Absorption in the visible region gives colour, and different substituents alter that absorption. Azo compounds are not all exactly the same yellow-orange shade. Explain colour through the extended electronic system rather than assuming any nitrogen-containing compound is coloured.
34.3 Amides
Preparation of amides
An acyl chloride reacts at room temperature with ammonia (a primary amide) or a primary amine (an N-substituted amide).
Reactions
- Hydrolysis by heating with aqueous acid (gives a carboxylic acid and an ammonium salt) or with aqueous alkali (gives a carboxylate salt and ammonia): .
- Reduction with gives an amine, since the C=O becomes .
Amides are very weak bases
The lone pair on N is delocalised onto the carbonyl oxygen (it overlaps with the C=O π bond), so it is not available to accept a proton. The nitrogen atom is also attached to an electron-withdrawing C=O group. Amides are therefore much weaker bases than amines and are almost neutral.
Amide structure, basicity and hydrolysis products
In an amide, nitrogen's lone pair overlaps with the carbonyl system, giving the C–N bond partial double-bond character and reducing the pair's availability for proton acceptance. Compare the complete conjugated group, not simply the electronegativity of nitrogen. Amides are substantially less basic than ordinary amines under the syllabus conditions.
Hydrolysis breaks the acyl C–N linkage. A primary amide gives ammonia in alkali or ammonium in acid; an N-substituted amide instead yields the corresponding amine or alkylammonium ion. The substituent originally attached to nitrogen is not transferred onto the acid carbon skeleton.
Worked example: heated with NaOH gives and ethylamine, not ammonia. Acidic hydrolysis gives ethanoic acid and ethylammonium. In both cases separate the two fragments at the C(O)–N bond and then assign protonation states for the medium.
Answer: Reduction retains the C–N connection and gives ethylamine. Hydrolysis breaks that connection and gives ethanoic acid/carboxylate plus ammonia/ammonium. Products with the wrong retained bond reveal an incorrect transformation.
34.4 Amino acids
An amino acid has both an amino group (–) and a carboxyl group (–COOH). In a 2-amino acid, both are on the same carbon: . They are amphoteric, behaving as both acid and base.
Zwitterions and the isoelectric point
In solution the amino acid exists mainly as a zwitterion: (overall neutral, with both charges).
- In acid (low pH) the carboxylate is protonated: (a cation).
- In alkali (high pH) the ammonium loses a proton: (an anion).
- The isoelectric point is the pH at which the amino acid has no net charge (it exists as the zwitterion).
Peptides
Two amino acids join in a condensation reaction between the –COOH of one and the – of the other, losing water and forming an amide (peptide) bond –CO–NH–. Two amino acids make a dipeptide, three a tripeptide, and so on.
Electrophoresis
A mixture is placed on a gel or paper at a given pH with an electric field. At a pH below its isoelectric point an amino acid is a cation and moves towards the cathode (negative); at a pH above it, it is an anion and moves to the anode (positive); at its isoelectric point it does not move. A larger charge and a smaller size mean faster movement. This lets you separate and identify amino acids and small peptides.
Glycine: no net charge, stays. Lysine: pH is below its isoelectric point so it is a cation, and moves to the cathode. Aspartic acid: pH is above its isoelectric point so it is an anion, and moves to the anode.
Protonation state is controlled by pH
For a simple amino acid without an ionisable side chain, strongly acidic solution favours , intermediate conditions favour the zwitterion, and strongly alkaline solution favours . A zwitterion is not uncharged everywhere: it has opposite charges on different groups and zero net charge. These ionic interactions help explain amino acids' relatively high melting points and their behaviour in water.
The isoelectric point is a condition of zero average net charge, usually dominated by zwitterionic form; it does not mean every molecule must be one completely non-ionised structure. Side-chain acids or bases change the charge pattern, so compare pH with the supplied isoelectric point rather than forcing lysine or aspartic acid into glycine's simple diagram.
Worked electrophoresis: an amino acid with pI 5.0 at pH 8.0 has an average negative charge and migrates towards the positive anode. At pH 3.0 it is on average positive and migrates towards the negative cathode. Direction follows charge; speed additionally depends on size, charge magnitude and medium, so equal directions do not imply equal speeds.
Answer: Different buffer pH values can place it above or below its isoelectric point, changing the sign of its average net charge. The applied field need not have been reversed.
Peptides: bond direction and water count
Condensation joins the carboxyl carbon of one amino acid to nitrogen of another, forming . The order of residues matters: glycine–alanine and alanine–glycine have different connectivity. For a simple linear peptide from amino-acid molecules, there are peptide links and water molecules released, with one amino end and one carboxyl end remaining.
Worked example: three amino acids form a linear tripeptide with two peptide bonds and lose two waters, so its molar mass is the sum of the three amino-acid molar masses minus 36.0 g mol⁻¹. Hydrolysis adds water at each peptide link to recover residues, with protonation states set by acid/alkali conditions.
Answer: Four. Linking five initially separate molecules into one linear chain requires four connections; the two terminal groups remain unlinked at the ends.
Chapter check: distinguish amines from amides, explain the two consequences of lone-pair delocalisation, assign pH-dependent charge and count peptide bonds from chain connectivity.
References and further reading
Scope follows section 34 of the Cambridge 9701 syllabus for 2025–2027. Chemguide’s Cambridge topic index links to alternative explanations. The worked exercises and added diagrams are original teaching examples; numerical examples are illustrative unless a specific source is identified.
Practise this chapter
Every past-paper question on these topics, with the mark scheme.
These notes are AI generated and may contain mistakes. Check them against your syllabus.

