10.1 Similarities and trends in the properties of the Group 2 metals, magnesium to barium, and their compounds
Group 2 metals have two outer electrons and form ions. Reactivity increases down the group, because the first and second ionisation energies fall (a larger radius, more shielding).
Reactions of the elements
- With oxygen: . Barium also forms a peroxide, but only the oxides are required.
- With water: (very slow with cold water; Mg reacts rapidly with steam to give MgO). , and Sr and Ba react more vigorously.
- With dilute acids: and . With sulfuric acid the reaction of Ba stops quickly because is insoluble and coats the metal.
Reactions of the oxides, hydroxides and carbonates
- Oxides: (slight), ; they react with acids: .
- Hydroxides are bases, and become more soluble and more strongly basic down the group (the pH of the saturated solution increases).
- Carbonates react with dilute acid: . They are insoluble in water.
Thermal decomposition
The nitrates also give brown fumes of and oxygen. Thermal stability increases down the group: it takes a higher temperature to decompose than . This is explained in the A Level chapter on Group 2, in terms of the polarisation of the anion.
Solubility
- Hydroxides: solubility increases down the group. is almost insoluble; is soluble.
- Sulfates: solubility decreases down the group. is soluble, is insoluble.
A white precipitate of forms (sulfates become less soluble down the group): .
Linking the electron configuration to reactivity
The Group 2 metals have an outer configuration and typically lose two electrons. Down the group, greater nuclear charge is outweighed by increased distance and shielding for the outer electrons, so the first two ionisation energies generally fall. This helps explain more vigorous reaction with water. Distinguish losing electrons more easily from attracting extra electrons more strongly: these metals act as reducing agents.
Surface conditions matter. Magnesium's oxide layer and the slow cold-water reaction can make it appear unreactive under one set of conditions, while steam gives a much faster reaction. With cold water, the hydroxide product is appropriate; with steam, write the oxide. Do not interchange the two equations simply because both release hydrogen.
Worked example: balances steam reaction. For calcium in cold water, . Bubbling is evidence of gas evolution; a white cloudy mixture can arise from sparingly soluble hydroxide. State the gas test if identification is requested: hydrogen gives a squeaky pop with a lighted splint.
Answer: Insoluble can form a surface coating that restricts acid contact with the metal. The observed reaction is limited by the coating, not evidence that barium has become intrinsically less willing to lose electrons.
Distinguishing three acid reactions
Metal plus dilute non-oxidising acid gives hydrogen; oxide or hydroxide plus acid gives water; carbonate plus acid gives carbon dioxide and water. Write the reaction class first, then the specific salt formula. A Group 2 metal always contributes a 2+ ion, but chloride and sulfate require different formula ratios.
Worked example: 0.0100 mol requires 0.0200 mol HCl but only 0.0100 mol for complete acid–carbonate neutralisation. Both cases can release 0.0100 mol , assuming no insoluble layer prevents completion. The acid's number of available protons sets the mole ratio.
For hydroxides, distinguish solubility from extent of dissociation of the dissolved portion. A sparingly soluble hydroxide can produce a lower-pH saturated solution because fewer hydroxide ions enter solution. This need not mean the dissolved portion behaves like a molecular weak base. Saturated-solution pH is also not a measure of how much undissolved solid remains.
Answer: . The carbonate gives the same nitrate salt plus and water. Oxide neutralisation does not release carbon dioxide because no carbon is present.
Thermal decomposition: observations and stoichiometry
Heating a carbonate releases carbon dioxide, detectable by turning limewater milky. Heating a nitrate gives brown nitrogen dioxide and oxygen, with the oxide remaining. Oxygen relights a glowing splint. The gas mixture is not adequately described by “a brown gas”; identify both products when asked.
Worked example: 0.0200 mol decomposes completely. From , it produces 0.0400 mol and 0.0100 mol , a total of 0.0500 mol gas. It leaves 0.0200 mol MgO. Count each coefficient; one mole of nitrate salt does not give one mole of every product.
Compare decomposition temperatures using the same anion and controlled conditions. A higher temperature needed for significant decomposition indicates greater thermal stability, not necessarily a higher melting point. The explanation through cation polarising power is developed in A Level Group 2.
Answer: 0.100 mol carbonate gives 0.100 mol oxide, or 5.60 g. The remaining 4.40 g leaves as carbon dioxide in an open heating experiment.
Using precipitation trends in qualitative analysis
The downward decrease in sulfate solubility makes barium ions a useful sulfate test reagent. Acidification with dilute HCl removes carbonate interference, which would otherwise also give a white barium precipitate. Add the acid before the barium reagent and avoid sulfuric acid, which would introduce the ion being tested. A white precipitate alone is not diagnostic unless the sequence controls possible interferences.
For a fair comparison of sulfate solubility, use comparable ion concentrations, volumes and temperature. Absence of visible precipitate in a very dilute sample does not prove the ions cannot form a sparingly soluble salt. Conversely, a large precipitate does not mean a different oxidation state has formed: precipitation is not necessarily redox.
Answer: It supplies sulfate ions itself, causing to form whether or not the original sample contained sulfate. The test would no longer identify the sample's original composition.
Chapter check: use the correct product for cold water versus steam, distinguish surface passivation from intrinsic reactivity, and connect ion ratios to quantitative calculations.
References and further reading
Scope follows section 10 of the Cambridge 9701 syllabus for 2025–2027. Chemguide’s Cambridge topic index links to alternative explanations. The worked exercises and added diagrams are original teaching examples; numerical examples are illustrative unless a specific source is identified.
Practise this chapter
Every past-paper question on these topics, with the mark scheme.
These notes are AI generated and may contain mistakes. Check them against your syllabus.

