Equilibrium calculations connect a chemical explanation to a numerical prediction. Why does a weak acid have a higher pH than a strong acid of the same concentration? How can a buffer absorb added acid? Why does a salt dissolve less readily when one of its ions is already present? Begin with the equilibrium equation, identify what changes, and then choose the appropriate expression.
Before starting, revise dynamic equilibrium and acids and bases, the mole equation , and converting cm³ into dm³. Concentrations in square brackets are in mol dm⁻³. Unless another value is given, these pH examples use mol² dm⁻⁶ at 298 K. The worked examples use illustrative data and are original practice problems.
25.1 Acids and bases
Conjugate acid–base pairs
A Brønsted–Lowry acid donates a proton; a base accepts one. After donating , an acid becomes its conjugate base. After accepting , a base becomes its conjugate acid. The two members of a conjugate pair differ by exactly one proton: their charges differ by one, but their other atoms are unchanged.
Ethanoic acid donates a proton to water. In the reverse reaction, ethanoate accepts a proton from the hydroxonium ion.
| Acid | Its conjugate base | Relationship |
|---|---|---|
| Acid loses | ||
| Acid loses | ||
| Acid loses | ||
| Acid loses |
The acid and base reacting together are usually not a conjugate pair. In the equation above, the pairs are and , rather than .
Answer: and . Ammonia accepts a proton, so it is the base in the forward reaction. Water donates a proton, so it acts as the acid. Water can take either role depending on its reaction partner.
pH and hydrogen ion concentration
The mathematical definition used for these aqueous calculations is:
is shorthand for a hydrated proton, often represented as . pH has no units. Keep the negative sign: mol dm⁻³ gives pH 3, not −3. A decrease of one pH unit means a tenfold increase in hydrogen ion concentration.
Worked example — converting in both directions. If mol dm⁻³:
If a different solution has pH 4.25:
Keep unrounded calculator values during intermediate steps. State concentration units and normally report a final pH to two decimal places unless instructed otherwise.
Answer: A has times the hydrogen ion concentration of B. A difference in pH is a logarithmic comparison; do not divide the pH numbers.
Water, Kw and the meaning of neutral
Water undergoes a small amount of ionisation:
Its ionic product is:
At 298 K, mol² dm⁻⁶. In a neutral solution, , so each concentration is mol dm⁻³ and pH is 7.00.
Neutral does not always mean pH 7. Water's ionisation is endothermic, so raising the temperature increases . Both ion concentrations increase in pure water, but remain equal. The water stays neutral even though its pH falls.
Worked example — neutral water at another temperature. Given mol² dm⁻⁶:
Answer: mol dm⁻³. Its pH is 11.40. Calculate hydrogen ion concentration before applying the pH definition.
Strong acids and strong alkalis: a calculation method
Strong describes essentially complete ionisation or dissociation in water; concentrated describes the amount of solute per unit volume. A dilute solution of HCl is still a strong acid. Do not use these terms interchangeably.
For a strong monoprotic acid such as HCl, one mole of acid produces one mole of . Provided the acid is not so dilute that water's contribution matters, equals the acid concentration. For a strong alkali, count hydroxide ions per formula unit: dissolved NaOH provides one; dissolved provides two.
Worked example — acid after dilution. Dilute 20.0 cm³ of 0.150 mol dm⁻³ HCl to a total volume of 250.0 cm³.
- Moles before dilution: mol.
- Dilution changes volume but not moles: mol dm⁻³.
- Apply the definition: .
Worked example — two hydroxide ions. A solution contains 0.00400 mol dm⁻³ dissolved .
Its pH is 11.90. Taking gives pOH, not pH.
When an acid and alkali are mixed, first use to find excess moles, then divide by the combined volume. For example, mixing 30.0 cm³ of 0.100 mol dm⁻³ HCl with 20.0 cm³ of 0.100 mol dm⁻³ NaOH leaves mol in 0.0500 dm³. Thus mol dm⁻³ and pH = 1.70.
Answer: Moles of are . The final mol dm⁻³, giving mol dm⁻³ and pH = 12.30.
Weak acids, Ka and pKa
A weak acid is only partially ionised. For a monoprotic acid:
Use equilibrium concentrations in . Its units here are mol dm⁻³; has no units. Water is the solvent and is omitted. At the same temperature, a larger means a greater tendency to donate a proton and therefore a stronger acid; a smaller means the same thing. Dilution changes concentrations and the degree of ionisation, but not at fixed temperature.
To calculate the pH of a solution containing just weak acid and water, let its initial concentration be and equilibrium be :
| Concentration / mol dm⁻³ | |||
|---|---|---|---|
| Initially, ignoring water's ions | 0 | 0 | |
| Change | |||
| At equilibrium |
Thus . For small ionisation, , so :
This assumes water supplies negligible and only a small fraction of ionises. Check : if it is only a few percent or less, the small-ionisation approximation is reasonable. Do not apply this expression to a buffer, where added salt supplies a separate source of .
Worked example — weak-acid pH. A 0.0800 mol dm⁻³ acid has mol dm⁻³.
The small percentage supports the approximation. The same concentration of a strong monoprotic acid would have pH 1.10. The difference comes from the equilibrium position, not from fewer acid molecules having been added initially.
Worked example — finding acid strength from measured pH. A 0.0500 mol dm⁻³ weak monoprotic acid has pH 3.20. First, mol dm⁻³. Taking :
Then . If greater precision is needed, retain in the denominator; state which approximation you used.
Answer: mol dm⁻³. pH = 2.80, and percentage ionisation is 1.26%, supporting .
Making a buffer and explaining its action
A buffer solution resists a large change in pH when a small amount of acid or alkali is added. An acidic buffer contains substantial amounts of a weak acid and its conjugate base, usually supplied by a soluble salt. Ethanoic acid with sodium ethanoate is an example. The salt dissociates to supply ; is a spectator ion.
Two preparation routes are useful:
- Mix a weak acid solution with a solution of its salt.
- Partly neutralise a weak acid with a strong alkali. Some acid must remain, while some becomes its conjugate base: .
A weak acid alone has too little conjugate base to remove much added acid. A strong acid and its salt do not supply the weak-acid/conjugate-base reservoir required for an acidic buffer. Complete neutralisation of leaves mainly its salt, rather than a useful mixture of both components.
When acid is added, conjugate base removes most of the added hydrogen ions:
When alkali is added, weak acid removes most of the added hydroxide:
Both reactions change the amounts of acid and conjugate base slightly. The pH changes a little; it is not held exactly constant. Buffer capacity is limited: enough acid exhausts , while enough alkali exhausts . A more concentrated buffer with the same ratio can neutralise more added acid or alkali per unit volume before a large change occurs.
Buffer pH: mixtures and partial neutralisation
Rearrange the acid equilibrium expression:
Taking logarithms gives the equivalent form:
Both components share the same final volume, so their concentration ratio equals their mole ratio. You may use after any neutralisation reaction. If , pH = ; more conjugate base gives a higher pH.
Worked example — mixing acid and salt. Mix 40.0 cm³ of 0.200 mol dm⁻³ with 60.0 cm³ of 0.100 mol dm⁻³ sodium . Given mol dm⁻³:
- mol; mol.
- The final volume is 0.1000 dm³: and mol dm⁻³.
- mol dm⁻³.
- pH = 4.62. Using the original concentrations directly gives the wrong ratio because the mixed volumes were different.
Worked example — partial neutralisation. Add 20.0 cm³ of 0.100 mol dm⁻³ NaOH to 50.0 cm³ of 0.100 mol dm⁻³ , which has .
| Amount / mol | |||
|---|---|---|---|
| Before reaction | 0.00500 | 0.00200 | 0 |
| Reaction change | −0.00200 | −0.00200 | +0.00200 |
| After reaction | 0.00300 | 0 | 0.00200 |
The strong alkali is used up. Remaining acid and newly formed conjugate base make a buffer:
Adding acid or alkali to a buffer
Worked example — added acid. A buffer contains 0.0100 mol and 0.0100 mol , with . Add 0.00100 mol HCl with negligible volume change. Initially pH = 4.76. Added reacts with , giving:
The fall is only 0.09 pH unit. If alkali is added instead, subtract its moles from and add them to before calculating pH. Check that neither component has been exhausted.
Dilution reduces both concentrations by the same factor, leaving the ratio and approximate pH unchanged. It reduces buffering capacity per unit volume. At extreme dilution, water's own ions matter and these approximations fail.
Answer: converts into . The amounts become 0.0180 mol acid and 0.0120 mol conjugate base. pH , compared with 4.50 initially. Using the original ratio would ignore neutralisation.
Buffer uses and hydrogencarbonate in blood
Blood must maintain a narrow pH range for normal protein and enzyme function. One contributing buffer involves dissolved carbon dioxide and hydrogencarbonate:
Increased shifts this equilibrium left: removes added hydrogen ions, producing dissolved and water. Added alkali removes , allowing the equilibrium to move right and replenish it. This is a simplified account: blood has other buffers, and the body also regulates carbon dioxide and hydrogencarbonate.
Laboratory buffers provide stable reference solutions for calibrating pH meters. They are also used in enzyme experiments so that changes in activity can be attributed to the variable being studied rather than unintended pH drift. In exam explanations, identify the species and show how added acid or alkali is consumed. Saying only “the equilibrium shifts” leaves the mechanism unclear.
Solubility products: expressions and units
A sparingly soluble ionic solid establishes an equilibrium with its aqueous ions in a saturated solution:
The solubility product, , is the product of the equilibrium ion concentrations, each raised to its stoichiometric coefficient. The pure solid is omitted:
Ions continue leaving and returning to the solid at equal rates. Adding more solid to a saturated solution does not increase equilibrium ion concentrations at the same temperature.
| Dissolution equation | Expression | Units |
|---|---|---|
| mol² dm⁻⁶ | ||
| mol³ dm⁻⁹ | ||
| mol³ dm⁻⁹ |
For , the exponent 2 comes from the two fluoride ions released, not an ionic charge. The units come from three concentration factors: .
Answer: , so , with units mol³ dm⁻⁹. Leave out the solid.
Calculating solubility from Ksp and back again
Molar solubility, , is the amount of solid that dissolves per dm³ of solution. In pure water, assuming no other reaction consumes the ions, use the dissolution equation to express each ion concentration in terms of .
Worked example — solubility to constant. An illustrative sample has molar solubility mol dm⁻³. Each mole produces one mole of calcium ions and two of fluoride:
Worked example — constant to solubility. For an illustrative system, mol³ dm⁻⁹. Ignoring water's contribution to :
If the molar mass is 58.3 g mol⁻¹, the mass solubility is g dm⁻³. Convert mass solubility into molar solubility before substituting into a concentration-based expression.
Answer: Both concentrations equal , so and mol dm⁻³. Unlike an salt, this needs a square root.
The common ion effect and precipitation
Consider solid AgCl in aqueous NaCl. Both supply , the common ion. Increasing its concentration drives
to the left, reducing the silver ion concentration and the amount of AgCl that dissolves. stays constant at fixed temperature; solubility changes instead.
Worked example — common-ion solubility. Take mol² dm⁻⁶. In pure water:
In 0.0200 mol dm⁻³ NaCl, let extra dissolved AgCl have concentration . Then and . Approximate the chloride concentration as 0.0200:
This is much less than in pure water. The result is tiny compared with 0.0200, confirming the approximation. Here we assume no significant complex formation or other reactions involving the ions.
To predict precipitation, calculate the ionic product, , from concentrations immediately after mixing, before precipitation. Use the same powers as in :
- : unsaturated; precipitation is not predicted.
- : at the saturation boundary.
- : precipitation is favoured until remaining ion concentrations satisfy the equilibrium condition.
Worked example — dilution on mixing. Mix equal volumes of mol dm⁻³ and mol dm⁻³ NaCl. Each original concentration halves, giving mol dm⁻³.
This exceeds , so AgCl precipitates. tests the mixture's initial composition; it is not a new value of .
Answer: , giving mol dm⁻³. The extra of is negligible. Dividing by 0.0100 rather than its square misses the stoichiometric exponent.
25.2 Partition coefficients
Distribution between immiscible solvents
When a solute dissolves in two immiscible solvents, shaking increases contact and helps it reach equilibrium. Particles continue crossing both ways, but at equilibrium their transfer rates are equal and each concentration stays constant. The concentrations need not be equal.
The partition coefficient, , is the equilibrium ratio of a solute's concentrations in two solvents at fixed temperature. Always specify the order. Here:
Concentration units must match, so the ratio has no units. You may use g cm⁻³ in both numerator and denominator, or mol dm⁻³ in both. A coefficient of 5 means five times the concentration in the organic layer, not necessarily five times the mass: the volumes may differ.
The simple treatment assumes dilute solutions and the solute in the same molecular form and physical state in both solvents, without significant reaction, ionisation or association. Do not apply a single simple ratio to a solute that ionises in one layer or forms dimers in the other.
Polarity and choice of extraction solvent
Predict the preferred solvent by comparing intermolecular attractions. A non-polar molecular solute is often more soluble in a non-polar solvent, where dispersion forces replace similar attractions. A polar solute capable of hydrogen bonding may interact strongly with water. Ionic species generally favour water through ion–dipole attractions.
“Like dissolves like” is a starting point; explain which interactions stabilise the solute. For defined as organic/water, stronger relative attraction to water lowers it; stronger relative attraction to the organic phase raises it. Reversing the solvent order gives the reciprocal coefficient. Temperature may also change the ratio.
An extraction solvent should dissolve the desired solute effectively and form a separate layer from the original solvent. The organic layer is not always the top layer: position depends on density.
Finding a coefficient and solving a single extraction
Worked example — coefficient from measured masses. Initially, 0.600 g of solute is in 60.0 cm³ water. After shaking with 20.0 cm³ organic solvent, 0.400 g is in that layer. Assuming unchanged volumes, water retains g:
Using alone gives a mass ratio of 2, not a concentration ratio of 6.
Worked example — mass extracted. A solute has for organic/water. Initially 1.20 g is in 100 cm³ water. Shake with 40.0 cm³ organic solvent, assuming unchanged layer volumes. Let g transfer:
| Layer | Equilibrium mass / g | Concentration / g cm⁻³ |
|---|---|---|
| Organic | ||
| Water |
Thus 0.800 g is extracted, leaving 0.400 g in water. Check: . The extracted fraction is .
Answer: , giving . Concentrations differ threefold, but masses are equal because the aqueous volume is three times larger.
Repeated extraction with fresh solvent
Several smaller fresh portions can extract more solute than one larger portion of the same total volume. Each fresh portion begins with no solute and establishes a new equilibrium with what remains in the water.
Use the previous worked example: 1.20 g in 100 cm³ water, . Replace one 40.0 cm³ extraction with two separate 20.0 cm³ extractions, removing the first organic layer before adding the second.
First extraction:
There are 0.600 g left in water. For the second extraction, let g transfer to fresh solvent:
Together the organic layers contain , or 75.0% of the original solute, compared with 0.800 g and 66.7% for one extraction. The coefficient has not changed; the sequence of equilibrium distributions has.
Answer: The first extraction removes 0.300 g, leaving 0.600 g. The second removes 0.200 g, leaving 0.400 g. Total extracted = 0.500 g, compared with 0.450 g in one extraction. Start the second calculation with the remaining 0.600 g, not the original 0.900 g.
Choosing the right equilibrium method
| Situation | Start with | Essential check |
|---|---|---|
| Strong acid or alkali | Ion stoichiometry, then pH or | Ions per formula unit; final volume |
| Weak acid alone | Small ionisation; negligible water contribution | |
| Buffer | Neutralisation moles, then | Both components remain; use amounts after reaction |
| Salt in pure water | Dissolution equation, then concentrations in terms of | Ion ratio and powers |
| Common ion present | and total concentration of that ion | Is its contribution from dissolution negligible? |
| Extraction | Mass balance and concentrations in both layers | Ratio direction; mass remaining after each extraction |
Check that equations balance, units match the expression, calculated masses do not exceed the starting mass, and your explanation agrees with the result. A buffer given acid should decrease in pH; a common ion should reduce solubility under the assumptions used here.
References and further reading
Coverage follows section 25 of the Cambridge 9701 syllabus for 2025–2027. Alternative explanations are available in Chemguide's acid–base theory, acid strength, ionic product of water, buffers, solubility-product guide and partition-coefficient guide. Explanations, numerical exercises and diagrams were written for Note Academy.
Practise this chapter
Every past-paper question on these topics, with the mark scheme.
These notes are AI generated and may contain mistakes. Check them against your syllabus.

