6.1 Redox processes: electron transfer and changes in oxidation number (oxidation state)
Oxidation numbers
The oxidation number is the charge an atom would have if the bonding were completely ionic. The rules are:
- An element on its own is 0, including in and .
- The sum for a neutral compound is 0; for an ion it equals the charge on the ion.
- Group 1 is +1, Group 2 is +2, Al is +3 and F is −1.
- H is +1 (−1 in metal hydrides). O is −2 (−1 in peroxides such as , and +2 in ).
- Cl, Br and I are −1 unless combined with oxygen or a more electronegative halogen.
A Roman numeral shows the oxidation number: manganese(VII) in , chromium(VI) in and sulfur(VI) in .
Redox definitions
- Oxidation is loss of electrons, or an increase in oxidation number.
- Reduction is gain of electrons, or a decrease in oxidation number.
- Redox is a reaction in which both happen. The oxidising agent is reduced (it takes electrons) and the reducing agent is oxidised (it gives electrons).
- Disproportionation is when a single species is both oxidised and reduced, as in (Cl goes from 0 to −1 and to +1) and .
Balancing redox equations
Find the change in oxidation number for each species, multiply so that the total increase equals the total decrease, then balance the rest with and (in acid solution).
Mn goes from +7 to +2 (gain of 5) and Fe from +2 to +3 (loss of 1), so use for each :
Check the charge: left , right .
Assigning oxidation numbers systematically
Oxidation numbers are an electron-bookkeeping model, not necessarily the real charge on an atom in a molecule. Oxygen in water is assigned −2 even though a water molecule is covalent. A monatomic ion's oxidation number does equal its charge. To find an unknown value in a polyatomic species, add all oxidation-number contributions and equate the sum to the overall charge.
Worked example: in let each Cr be . Seven oxygens contribute −14, so and . In , four hydrogens contribute +4, so and nitrogen is −3. The subscript tells you how many atoms contribute; it is not itself an oxidation number.
Check exceptions before applying a rule mechanically. Oxygen is −1 in a peroxide because the O–O unit has total charge 2−. Hydrogen is −1 in ionic metal hydrides such as NaH. Elements are zero even when their molecules are diatomic or larger: the subscript in does not give chlorine an oxidation number of two.
Answer: For nitrate, , so N is +5. For sulfite, , so S is +4. Give signs, not just magnitudes.
Identifying the agent and the species changed
An oxidising agent causes another substance to lose electrons by accepting them itself. Therefore it is reduced. A reducing agent donates electrons and is oxidised. Name the complete reacting species when asked for the agent, then state the relevant element's oxidation-number change as evidence.
Worked example: in , zinc changes from 0 to +2 and loses two electrons. It is the reducing agent. Copper(II) changes from +2 to 0 and gains those electrons, so is the oxidising agent. Sulfate ions in a copper sulfate solution would be spectators, not the oxidising species.
A reaction can involve oxygen without being redox. In , copper remains +2, oxygen −2, hydrogen +1 and chlorine −1. This is an acid–base reaction with no oxidation-number change. Conversely, electron transfer can occur without oxygen being present at all.
Answer: is reduced from 0 to −1 and is the oxidising agent. is oxidised from −1 to 0 and is the reducing agent. Both changes occur in the same reaction, with two electrons transferred overall.
Constructing half-equations in acid solution
Use a repeatable sequence: balance the element other than H and O, balance O with water, balance H with , then balance total charge with electrons. Finally check every atom and the charge. Electrons belong on the left of a reduction half-equation and on the right of an oxidation half-equation.
Worked example — dichromate reduction: begin . Add seven waters on the right and fourteen protons on the left. The left charge is now +12, while the right is +6, so add six electrons to the left:
Iron(II) oxidation is . Multiply this entire equation by six and add it to the reduction equation, cancelling electrons:
The 1 : 6 ratio follows from electron conservation and can be used in titration calculations. Electrons must cancel out of an ordinary overall redox equation; leaving six electrons on one side indicates incomplete combination.
Answer: . Each side contains two iodine atoms, four sulfur atoms, six oxygens and total charge 4−. The iodine-to-thiosulfate mole ratio is 1 : 2.
Recognising disproportionation
In disproportionation, atoms of the same starting element in one species end up at both higher and lower oxidation numbers. Merely having two oxidation states among the products is insufficient unless the starting species undergoes both changes. In cold dilute alkali, chlorine starts at 0 and forms chloride (−1) and chlorate(I) (+1). Equal one-electron changes give a 1 : 1 ratio of these chlorine-containing products.
Worked example: in , oxygen begins at −1. Some becomes −2 in water and some becomes 0 in oxygen gas. Hydrogen remains +1 throughout. The peroxide is both an oxidising and a reducing agent in this decomposition.
Answer: No. Magnesium is only oxidised, from 0 to +2, while oxygen is only reduced, from 0 to −2. It is redox, but no single starting species is both oxidised and reduced.
Chapter check: distinguish a charge from an oxidation number, name each agent, and balance atoms and charge independently. These half-equation skills underpin electrode potentials and electrolysis and transition-metal titrations.
References and further reading
Scope follows section 6 of the Cambridge 9701 syllabus for 2025–2027. Chemguide’s Cambridge topic index links to alternative explanations. The worked exercises and added diagrams are original teaching examples; numerical examples are illustrative unless a specific source is identified.
Practise this chapter
Every past-paper question on these topics, with the mark scheme.
These notes are AI generated and may contain mistakes. Check them against your syllabus.

