14.1 Alkanes
Alkanes are saturated hydrocarbons, . They are generally unreactive because the C–C and C–H bonds are strong and have little polarity, so polar reagents (acids, bases, nucleophiles) do not attack them.
Preparation of alkanes
- Hydrogenation of an alkene: with a Pt or Ni catalyst and heat.
- Cracking of a longer alkane: heat with , e.g. . Cracking converts heavy fractions of crude oil into more useful, shorter alkanes (for petrol) and alkenes (for polymers and other products).
Combustion
Complete: . Incomplete combustion, with limited oxygen, gives carbon monoxide (toxic) and carbon (soot).
Free-radical substitution
Alkanes react with chlorine or bromine in ultraviolet light: .
- Initiation: (homolytic fission by UV light).
- Propagation: , then . The radical is regenerated, so it is a chain reaction.
- Termination: two radicals combine: , or .
Further substitution gives a mixture (, , ), and a side product from termination such as ethane.
Environmental consequences of the internal combustion engine
Engine exhaust contains CO, oxides of nitrogen and unburnt hydrocarbons. CO is toxic; forms acid rain and smog; hydrocarbons contribute to smog. A catalytic converter removes them: .
Constructing a radical chain mechanism
Initiation creates radicals from non-radical starting material. Propagation consumes one radical and forms another, allowing the sequence to continue. Termination consumes radicals without generating replacements. The distinction depends on the species involved, not whether a step produces the desired organic product. Methyl radical plus chlorine forms chloromethane in a propagation step; methyl radical plus chlorine radical also forms chloromethane, but is termination.
Worked example — bromination of ethane: initiation is . Propagation steps are and . Termination can form , bromoethane or butane through radical combinations. Add the propagation steps and cancel radicals to recover the overall substitution equation.
UV light supplies energy for homolytic bond fission; it is a condition, not a catalyst molecule. Multiple substitutable hydrogens and further reactions of halogeno products generate mixtures. Using excess alkane favours monosubstitution relative to repeated halogenation, but does not turn the process into a perfectly selective synthesis.
Answer: It is termination: two radicals combine and no radical remains. Methyl radicals formed during propagation can meet and create this side product even though the intended product is chloromethane.
Combustion, cracking and environmental chemistry
Balance hydrocarbon combustion by matching carbon to , hydrogen to , then oxygen last. Fractional oxygen coefficients are acceptable unless whole numbers are requested. Incomplete combustion can produce CO or carbon because oxygen supply is insufficient for full oxidation. A higher amount of carbon in a fuel molecule does not alone determine whether combustion is complete.
Worked example: . Burning 0.100 mol butane completely needs 0.650 mol oxygen and gives 0.400 mol carbon dioxide. A cracking equation has different products: for example , conserving every atom without consuming oxygen.
14.2 Alkenes
Alkenes are unsaturated hydrocarbons, , containing a C=C double bond (one σ and one π bond). The π bond is a region of high electron density, so alkenes are attacked by electrophiles.
Preparation of alkenes
- Elimination of HX from a halogenoalkane: ethanolic NaOH, heat.
- Dehydration of an alcohol: heated catalyst, or concentrated (or ) with heat.
- Cracking of longer alkanes.
Reactions
| Reagent | Conditions | Product |
|---|---|---|
| Pt or Ni, heat | alkane | |
| (steam) | catalyst | alcohol |
| room temperature | halogenoalkane | |
| room temperature | dihalogenoalkane | |
| Cold dilute acidified | diol (purple to colourless) | |
| Hot concentrated acidified | C=C cleaved |
Hot concentrated acidified oxidatively splits the C=C bond. A =CH₂ end gives and water, a =CHR end gives a carboxylic acid RCOOH, and a =CR₂ end gives a ketone. The products identify the position of the double bond in a larger molecule.
Test for C=C: shake with aqueous bromine; an alkene decolourises it (orange-brown to colourless).
Addition polymerisation: many alkene monomers join, for example (see the chapter on polymerisation).
Electrophilic addition mechanism
For with ethene, the π electrons polarise the Br–Br bond. Electron movement begins from the π bond towards , with the Br–Br bond pair moving to the other Br. Addition ultimately gives 1,2-dibromoethane. Bromination is commonly represented through a bridged bromonium intermediate; use the representation specified by the course or question, and do not treat decolourisation alone as proof of a free carbocation.
For HBr and propene the electrophile is and the carbocation formed is .
Carbocation stability and Markovnikov's rule
Alkyl groups are electron-donating (a positive inductive effect). They spread the positive charge, so tertiary > secondary > primary carbocations in stability. The more stable carbocation forms preferentially, so adds to the carbon with more hydrogen atoms (Markovnikov addition). From propene and HBr the major product is 2-bromopropane (via the secondary carbocation), not 1-bromopropane.
Propanone comes from and ethanoic acid from . The alkene is , 2-methylbut-2-ene.
A complete HBr addition explanation
For propene, a curly arrow starts at C=C and points to the H of HBr. Another starts at the H–Br bond and ends on bromine. Adding H to the terminal carbon leaves a secondary carbocation on the middle carbon; the opposite orientation would give a less stable primary carbocation. Bromide then donates a lone pair to the positive carbon to form 2-bromopropane.
The major-product prediction compares intermediate stability, not simply which finished product looks more symmetrical. Alkyl groups stabilise positive charge through electron donation. State both possible carbocations where a question asks why one product predominates. The alternative route may still give a minor product; Markovnikov orientation is not a claim that every addition under every possible condition behaves identically.
Answer: 2-bromobutane, via a secondary carbocation. The alternative placement of H would produce a primary carbocation and favour the less important 1-bromobutane route.
Conditions determine the oxidation product
Cold dilute acidified manganate(VII) adds hydroxyl groups across C=C to form a diol. Hot concentrated acidified reagent can cleave the double bond. For cleavage predictions, mark the two original alkene carbons and determine what each was attached to: two carbon groups lead to a ketone fragment, one carbon group and one H lead to a carboxylic acid, and a terminal can be fully oxidised to and water.
Worked example: but-2-ene splits into two ethanoic-acid fragments. But-1-ene gives propanoic acid plus carbon dioxide under vigorous oxidative-cleavage conditions. The latter equation shortens the identifiable organic fragment because the terminal carbon is lost as ; atom counting explains the difference.
To reverse such a deduction, remove the oxygen added at the two carbonyl/acid positions and reconnect the corresponding carbons with C=C. Check total carbon count and whether the proposed alkene could give cis/trans isomers. A cleavage product can reveal connectivity without uniquely determining the original stereoisomer.
Answer: , 2,3-dimethylbut-2-ene. Each double-bond carbon carries two methyl groups, so each side becomes propanone. It has no cis/trans pair because each carbon has two identical substituents.
Distinguishing addition products and tests
Hydrogenation removes unsaturation without adding oxygen or halogen. Hydration adds H and OH, while halogen addition adds two halogen atoms. All preserve the original carbon skeleton unless another process occurs. For bromine-water testing, give the observation and inference separately: orange-brown colour disappears, supporting reactive unsaturation under the test conditions. Other groups can also consume bromine, so an unfamiliar multifunctional compound needs additional evidence.
The dihalogenoalkane is the standard product model for halogen addition under appropriate conditions. In aqueous media, solvent participation can affect detailed products; do not use a qualitative bromine-water observation as a complete preparative product analysis. The exam question's reagents and solvent determine the expected structure.
Answer: Hydrate ethene using steam with a phosphoric-acid catalyst under suitable industrial conditions. Dehydrate ethanol using heated aluminium oxide or a suitable concentrated acid with heat. One is addition and the reverse functional-group transformation is elimination.
Chapter check: balance radical steps, distinguish propagation from termination, show electron-pair sources in addition, and state both reagent concentration and temperature for oxidation. Continue to halogenoalkane substitution and alcohol chemistry.
References and further reading
Scope follows section 14 of the Cambridge 9701 syllabus for 2025–2027. Chemguide’s Cambridge topic index links to alternative explanations. The worked exercises and added diagrams are original teaching examples; numerical examples are illustrative unless a specific source is identified.
Practise this chapter
Every past-paper question on these topics, with the mark scheme.
These notes are AI generated and may contain mistakes. Check them against your syllabus.

