Note AcademyNote Academy

Chemistry (AS & A Level) 9701 · Chapter 22

Analytical techniques

Reading infrared spectra to identify functional groups, and using mass spectra for relative atomic mass, molecular mass, fragmentation, the number of carbon atoms and the presence of bromine or chlorine.

Written for the 2025–2027 syllabus · 10 min read

Download this chapter (PDF)

22.1 Infrared spectroscopy

Bonds absorb infrared radiation at characteristic wavenumbers, which makes their vibrations stronger. The spectrum plots % transmittance (peaks point downwards) against wavenumber (cm⁻¹). The absorptions to know (the Data section gives the values):

BondWavenumber / cm⁻¹Appearance
O–H (alcohol)3200–3600strong, broad
O–H (carboxylic acid)2500–3300very broad
N–H (amine, amide)3300–3500medium
C–H2850–3100strong
C≡N2200–2280medium
C=O1680–1750strong, sharp
C=C1620–1680weak to medium
C–O1000–1300strong

Use the fingerprint region below about 1500 cm⁻¹ to compare with a known sample. A very broad band from 2500 to 3300 cm⁻¹ together with C=O shows a carboxylic acid; C=O with no O–H and no N–H is an aldehyde, ketone or ester (ester also has C–O). Water in the sample would add an O–H absorption, so samples must be dry.

Read the axes before assigning a bond

On a transmittance spectrum, downward troughs indicate absorption; an absorbance spectrum uses the opposite visual convention. Wavenumber is reciprocal wavelength, measured in cm⁻¹, not a frequency in hertz. Locate a feature using its range, shape and intensity. A small feature near one tabulated value is weaker evidence than a clear broad acid OH band together with a strong carbonyl absorption.

Worked example: a sample has a strong C=O band and very broad OH absorption extending roughly 2500–3300 cm⁻¹. This combination supports a carboxylic acid. An alcohol has a differently shaped OH region and need not have C=O. An ester can show C=O and C–O but lacks the acid OH band. Interpret the combination rather than naming every compound with one carbonyl peak.

Functional groups versus exact identity

Different aldehydes and ketones can have similar carbonyl absorptions. IR often identifies functional groups more readily than the exact carbon skeleton. Matching the fingerprint region with a known reference can provide further evidence because its complex pattern depends on the whole molecule. A broad OH feature from contamination can obscure conclusions, so sample purity matters.

Worked comparison: propanal and propanone both have a carbonyl absorption and molecular formula C3H6OC_3H_6O. The main C=O peak alone does not distinguish them reliably. A positive Tollens' test supports propanal; a negative result plus suitable iodoform evidence supports propanone. Use a technique for what it measures rather than expecting one spectrum to answer every structural question.

Answer: No. It argues against a substantial OH-containing component in a suitable clean spectrum, but concentration, overlap and sample conditions matter. Combine it with other absorptions and chemical evidence before assigning a complete structure.

22.2 Mass spectrometry

In a mass spectrometer the sample is ionised and the ions are separated by their mass/charge ratio, m/em/e (the charge is usually +1, so m/em/e is the mass). You do not need to know how the machine works.

Relative atomic mass from isotopic abundances

Ar=∑(isotopic mass×abundance)∑abundancesA_r = \frac{\sum(\text{isotopic mass} \times \text{abundance})}{\sum \text{abundances}}

Ar=(35×75+37×25)/100=35.5A_r = (35 \times 75 + 37 \times 25)/100 = 35.5.

The molecular ion and fragmentation

  • The molecular ion, M+M^+, is the intact ionised molecule. Its m/em/e gives the relative molecular mass when its charge is +1. It need not be the tallest peak and may be weak or absent; isotope peaks can lie above it. Identify its cluster rather than blindly choosing the highest recorded mass.
  • Fragmentation breaks the molecular ion into smaller pieces. Peaks at known values identify the fragments: 15 is CH3+CH_3^+, 29 is C2H5+C_2H_5^+ (or CHO+CHO^+), 43 is C3H7+C_3H_7^+ (or CH3CO+CH_3CO^+), 45 is COOH+COOH^+ (or C2H5O+C_2H_5O^+). Differences between peaks show the groups lost.

The M + 1 peak and the number of carbon atoms

About 1.1% of carbon atoms are 13C^{13}C, so there is a small peak one unit above M+M^+. The number of carbon atoms nn is:

n=100×abundance of [M+1]+1.1×abundance of M+n = \frac{100 \times \text{abundance of } [M+1]^+}{1.1 \times \text{abundance of } M^+}

n=(100×1.76)/(1.1×40.0)=4.0n = (100 \times 1.76)/(1.1 \times 40.0) = 4.0, so 4 carbon atoms.

The M + 2 peak: chlorine and bromine

  • Chlorine has isotopes 35Cl^{35}Cl and 37Cl^{37}Cl in the ratio 3 : 1, so one Cl atom gives M+M^+ and [M+2]+[M+2]^+ in a 3 : 1 ratio.
  • Bromine has 79Br^{79}Br and 81Br^{81}Br in a ratio of about 1 : 1, so one Br atom gives M+M^+ and [M+2]+[M+2]^+ of equal height.

Compounds with two halogen atoms give MM, M+2M+2 and M+4M+4 peaks in characteristic ratios (for two bromine atoms 1 : 2 : 1).

Ion mass, charge and peak height

The horizontal axis is mass-to-charge ratio, often written m/zm/z. For a singly charged ion, a peak at 58 corresponds to ion mass 58 on the relative scale. A doubly charged ion of mass 58 would appear near 29. Ordinary syllabus organic fragmentation questions usually specify or imply singly charged ions, but the definition of the axis still matters.

The tallest peak is the base peak, assigned relative intensity 100. It indicates the most abundant detected ion under those measurement conditions, not necessarily the heaviest ion or the most abundant original molecule. Only charged fragments are detected; neutral fragments lost during fragmentation do not themselves give the corresponding ion peak unless separately ionised.

Worked example: a molecular ion at 72 and a major fragment at 57 differ by 15, consistent with loss of a methyl radical. A fragment at 43 may be an acylium ion or a hydrocarbon ion depending on composition. A nominal mass alone rarely identifies a unique fragment without other structural evidence.

Answer: 86. The base peak at 43 is the most intense detected ion, not automatically the molecular ion.

Carbon count from the isotope ratio

The M+1M+1 calculation compares its abundance with M, not necessarily with the base peak. If M has intensity 50.0 and M+1M+1 has intensity 2.75, their ratio is 5.50%; dividing by approximately 1.1% per carbon gives five carbons. Using 2.75/100 would incorrectly use the arbitrary base-peak normalisation as the molecular-ion abundance.

Worked formula deduction: a compound has molecular mass 88, five carbons from its M+1M+1 ratio, and contains only C, H and O. Five carbons contribute 60, leaving 28 mass units. One oxygen leaves 12 hydrogens, giving C5H12OC_5H_{12}O. Check chemical plausibility and other evidence; if the arithmetic gives an impossible hydrogen count, reconsider the isotope assumption or allowed elements.

The simple 1.1%-per-carbon approximation assumes the relevant cluster is identified and other isotope contributions do not dominate. Use supplied isotope abundances when provided. Treat a result close to an integer with the precision of the data in mind rather than inventing a fractional carbon atom.

Answer: (5.28/80.0)×100=6.60%(5.28/80.0)\times100=6.60\%, so approximately 6.60/1.10=66.60/1.10=\mathbf{6} carbons.

Halogen clusters and combined interpretation

For one chlorine, the parent isotope pair is separated by two mass units with about 3 : 1 intensity. For one bromine, the pair is about 1 : 1. A compound with two chlorine atoms has approximate 9 : 6 : 1 proportions across M, M+2 and M+4 because the isotope combinations follow the product of two 3 : 1 distributions. Do not interpret this three-peak pattern as three separate compounds automatically.

Worked identification: a parent cluster at 108/110 with equal heights supports a one-bromine molecule with lighter parent mass 108. If the compound contains only C, H and Br, subtract 79 to leave 29, consistent with C2H5C_2H_5. The formula C2H5BrC_2H_5Br fits. A fragment near 29 then supports loss of bromine, though independent evidence should still be considered.

Answer: The evidence supports one chlorine atom and a carbonyl-containing structure without a substantial OH feature. It does not uniquely identify the carbon skeleton or decide aldehyde, ketone or another carbonyl class without further information.

Chapter check: identify axes, distinguish base peak from molecular ion, use the M-relative isotope ratio and combine independent constraints. More powerful structural deductions follow in A Level analytical techniques.

References and further reading

Scope follows section 22 of the Cambridge 9701 syllabus for 2025–2027. Chemguide’s Cambridge topic index links to alternative explanations. The worked exercises and added diagrams are original teaching examples; numerical examples are illustrative unless a specific source is identified.

Test yourself8 flashcards on this chapter.Flashcards →

Practise this chapter

Every past-paper question on these topics, with the mark scheme.

These notes are AI generated and may contain mistakes. Check them against your syllabus.