Chemistry · May / June 2022 · Paper 31 · Question 2
YCH11
As printed in the paper
The question as text
2 The hydrogencarbonate of an unknown Group 1 metal, MHCO3, is a white solid. Two students carried out a titration experiment using hydrochloric acid. The results were used to determine a value for the relative formula mass, Mr , of MHCO3 and thus obtain a value for the relative atomic mass, Ar , of M. Both students made solutions containing 2.00 g of MHCO3. The first student made a 250.0 cm3 standard solution. The second student made a solution by placing the MHCO3 in a beaker, dissolving the solid in a little deionised water, and then filling the beaker to the 250 cm3 mark. Both students titrated 25.0 cm3 portions of their solution using hydrochloric acid with a concentration of 0.150 mol dm–3. They used the same method and equipment. The students repeated their titrations until they achieved concordant titres. The first student obtained a mean titre of 13.35 cm3.
Read automatically from the paper; the printed page above is exact.
Show the answer and mark scheme
2(a)[4]
Example of calculation
calculation of moles of= 13.35 × 0.150 = 0.0020025 / 0.00200 / 2.0025 × 10‒3 /
hydrochloric acid
1000
2.00 × 10‒3 (mol)
(ans 1)
calculation of moles of MHCO3= ans (1) × 10 = 0.020025 / 0.0200 / 2.0025 × 10‒2 / 2.00 × 10‒2 (mol)
in 250 cm3
(ans 2)
= mass of MHCO3 = 2.00 = 99.88 (g mol‒1)
calculation of relative formulaans (2) 0.020025
mass of MHCO3
(ans 3)
= ans (3) 1 12 – 48 = 38.88 (g mol‒1)
calculation of Ar of M to 2decimal places
Allow for M2 and M3
mass of MHCO3 ÷ 10
and then ÷ (ans 1)
Allow TE at each stage
Allow use of 25cm3 giving relative formula mass = 53.33 scores (2) for
M2 and M3 as 61 cannot be subtracted from it
Correct answer with some working scores 4
Ignore SF except 1SF
2(b)(i)[1]
Example of calculation
calculation of experimental error= 39.1 37.52 × 100 = 4.04 / 4.0 / 4 %
39.1
Allow
= 39.1 37.52 = 1.58 with no further working
Allow 4.04 / 4.0 with no working scores 1
Do not award just 4% with no working
Do not award = 39.1 37.52 × 100 = 4.21 %
37.52
2(b)(ii)[3]
An answer that makes reference to the following points:
Example of calculation
calculate the experimental difference37.52 × 4.50 ÷ 100 = 1.6884
Either
calculation of the range37.52 ± 1.6884 = 35.832 to 39.208 /
comment on the range in relation to the value ofpotassium lies within this range
39.1
or
calculation of highest possible value37.52 + 1.6884 = 39.208
comment on the value 39.1 being between the39.1 lies between 37.52 and 39.208
highest value and the midpoint of the range
Use of 39.1 ± 1.7595 = (40.8595 to) 37.3405 can
score M1 and M2 but cannot score M3.
Use of 39.1 – 1.7595 = 37.52 can score M1 and M2
(similar to ‘or’)
Allow a correct application of uncertainty to an
incorrect value can score M2 and M3
2(b)(iii)[2]
An explanation that makes reference to the following
points:
Accept use a larger aliquot / sample / larger volume
increasing the mass of MHCO3 / decrease theof MHCO3(aq)
concentration of HCl
Ignore reading the meniscus at eye level
Ignore reading the bottom of the meniscus
gives a larger titration volume (so smallerDependent on M1 or a near miss
percentage uncertainty
2(b)(iv)[4]
An answer that makes reference to the following points:
use of volumetric flaskAllow standard flask / graduated flask
Route 1
dissolve solid (in a beaker/conical flask) inVolume if stated must be less than 250 cm3
distilled / deionised water
pour (the solution into the volumetric flask using afunnel) with washings
make (the volumetric flask) up to the mark / 250Allow any indication of swirling, stirring, inverting
cm3 and shake
Route 2
Volume if stated must be less than 250 cm3
transfer solid (to the volumetric flask) andAllow weigh the container before and after (so mass
dissolve in distilled / deionised water
of solid is known) in place of washing
Add washings from the containermake (the volumetric flask) up to the mark / 250Allow any indication of swirling, stirring, inverting
cm3 and shake
2(c)(i)[2]
An answer that makes reference to the following points:
flame testIgnore descriptions of the flame test
Do not award other tests in addition to flame test
lilac flameDo not award pink / purple / mauve
Ignore the result of additional tests
2(c)(ii)[3]
An answer that makes reference to the following points:
dissolve in deionised / distilled water and addAccept dissolve in (dilute) nitric acid
Accept form a solution for dissolve
(dilute) nitric acid
Do not award just water
add silver nitrate (solution)Independent of M1
white precipitateDependent on M2
Ignore use of ammonia solution for confirmation
Or
addition of concentrated sulfuric acidformation of (only) steamy fumesAllow white fumes
Do not award white smoke
damp blue litmus turns red / white smoke withammonia
(Total for Question 2 = 19 marks)
Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.

