Note AcademyNote Academy

Physics · Oct / Nov 2024 · Paper 31 · Question 2

YPH11

As printed in the paper

The question as text

2 A student was given a sealed box that contained some electrical components. The sealed box could contain a diode, resistor, filament bulb, or a combination of any of these components. The student could not see the components inside the sealed box. Two terminals, X and Y, on the sealed box enabled the student to connect the components to a 6.0 V power supply and fixed resistor R. The student investigated the current-potential difference characteristics of the sealed box.

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 2(a)(i)[2]

    Circuit containing power supply, voltmeter, ammeter, variable resistor

    Ammeter in series, voltmeter in parallel with sealed box

    Example of circuit

  • 2(a)(ii)[3]

    The fixed resistor is needed to limit the (maximum) current in the circuit

    Or The fixed resistor is needed to prevent a short circuit

    Because when the direction of current/potential difference is reversed

    The diode has a low resistance (and the current in the circuit will be very high)

  • 2(a)(iii)[4]

    𝑉

    Use of R =

    𝐼

    R = 27 Ω

    Or I = 0.161 A or 0.294 A

    𝑉2

    Use of P =

    𝑅

    Or Use of P = I 2R

    Or Use of P = V × I

    Conclusion stating resistor D with comparisons to minimum resistance of 27 Ω and

    correct value calculated from a power formula

    Or

    Conclusion stating resistor D with comparisons to I = 0.161 A or 0.294 A and correct

    value calculated from a power formula

    Example of calculation

    𝑉

    (6 − 0.7) V

    R =

    𝐼=

    200 × 10−3 A = 27 Ω

    𝑉2

    (5.3V)2

    P =

    𝑅=

    33 Ω = 0.85 W

  • 2(b)[2]

    The graph shows current readings when the potential difference is negative

    Therefore the resistor and diode are in parallel

    MP2 dependent on MP1

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.