Note AcademyNote Academy

Physics · Oct / Nov 2024 · Paper 31 · Question 1

YPH11

As printed in the paper

The question as text

1 A student used a steel sphere in an experiment to determine the viscosity of a liquid.

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 1(a)(i)[2]

    Uses percentage uncertainty = half resolution / measurement (× 100%)

    Percentage uncertainty = 0.4%

    Accept 0.39%, 0.394%

    Example of calculation

    0.05 mm

    Percentage uncertainty =

    12.7 mm × 100 = 0.394%

  • 1(a)(ii)[2]

    Check (and correct for) zero error

    To eliminate systematic error

    MP2 dependent on MP1

  • 1(a)(iii)[3]

    Use a (mass) balance to obtain the mass

    4

    3 π𝑟3

    Divide d by two (to obtain the radius) and calculate the volume using

    𝑚

    Calculate density using 𝜌=

    𝑉

  • 1(b)[4]

    Use a metre rule to measure distance (travelled by the sphere)

    Record distance Or time for two regions between the rubber bands

    Start and stop the stopwatch when the same point of the steel sphere passes the band

    Or Ensure measurement (of time) is taken in line with the sphere

    Or Use the lap timer on stopwatch

    Or Repeat with the sphere at the same initial position

    Or Record the motion between the rubber bands and view in slow motion

    Relate measurements to terminal velocity, e.g. travels equal distance in equal time, or

    velocity is equal in each region

  • 1(c)[2]

    EITHER

    Lower limit = 0.68 (Pa s)

    Correct conclusion comparing calculated lower limit to quoted viscosity of castor oil

    Example of calculation

    Lower limit = 0.72 Pa s × ( − ) = (Pa s)

    The lower limit is greater than 0.65 (Pa s) so the liquid is not castor oil

    OR

    Percentage difference = 11%

    [Accept 10%]

    Correct conclusion comparing calculated %D to 6%

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.