Note AcademyNote Academy

Physics · Oct / Nov 2023 · Paper 31 · Question 2

YPH11

As printed in the paper

The question as text

2 A student models a safety system used on a railway. Two parallel 30 cm copper rods model the rails. These rods are fixed 5 cm apart and are connected to an ohmmeter. A movable copper rod models the train. This rod completes the circuit with the ohmmeter, as shown. x Ω 30 cm copper rods 5 cm movable copper rod As the distance x varies, the resistance R of the circuit varies.

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 2(a)[4]

    Measure x with a metre rule
    Ensure the moveable rod is perpendicular to the fixed rods (e.g. use a setsquare)

    Or measure x on both 30 cm rods and calculate the average

    Or measure to the centre of the moveable rod

    Or align the metre rule near to the 30 cm rod

    Or measure x while looking perpendicularly at the metre rule

    Check for zero error on ohmmeter

    Or choose appropriate range on ohmmeter

    Or repeat R readings and calculate mean R for same value of x

    Minimise contact resistance (e.g. ensure rods are clean)
  • 2(b)[1]

    Max 1 of

    (When x = 0 m) the ohmmeter will measure the resistance of the (moveable)

    copper rod

    Zero error in ohmmeter
    The connecting leads have a resistance
  • 2(c)[4]

    EITHER

    Use of A = πr2 (accept A = πd2 / 4)
    Use of l = 2x + 0.05 m
    Use of R = l/A (with a pair of values from the line of best fit)
    = 1.7 × 10–8 Ω m

    Accept use of x = 0 (l = 0.05 m) for MP2 and correct calculated value for MP4

    OR

    Use of A = πr2 (accept A = πd2 / 4)
    Calculates gradient
    Use of gradient = 2/A
    = 1.7 × 10–8 Ω m

    Example of calculation

    A = πr2 = π × (0.0015 m)2 = 7.1 × 10–6 m2

    l = 2x + 0.05 = (2 × 0.25 m) + 0.05 m = 0.55 m

    = RA/l = (1.3 × 10–3 Ω × 7.1 × 10–6 m2) / 0.55 m = 1.68 × 10–8 Ω m

    OR

    A = πr2 = π × (0.0015 m)2 = 7.1 × 10–6 m2

    Gradient = (1.55 × 10–3 Ω – 0.35 × 10–3 Ω)/(0.3 m – 0.05 m) = 4.8 × 10–3 Ω m–1

    = gradient × A/2 =1.70 × 10–8 Ω m

  • 2(d)[2]

    As the crosssectional area decreases the resistance (per unit length of track)

    increases

    The system will estimate the position of the train is further away than it actually

    is

    Or the train is actually closer than the system estimates it to be

    MP2 dependent on MP1

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.