Note AcademyNote Academy

Physics · Oct / Nov 2023 · Paper 31 · Question 1

YPH11

As printed in the paper

The question as text

1 A student investigated the metal cube shown. She measured the length, width and height of the cube. She repeated these measurements in different places on the cube. Her measurements are shown in the table below. Length / mm Width / mm Height / mm Measurement 1 20.3 20.4 20.1 Measurement 2 20.2 20.5 20.1 Measurement 3 20.1 20.0 20.1 Mean 20.2 20.3 20.1

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 1(a)[1]

    Max 1 of

    Vernier calipers
    Digital calipers
    Micrometer (screw gauge)
  • 1(b)[1]

    Max 1 of

    The 20.0 mm measurement is an outlier / anomaly (accept measurement 3)
    The student misread the scale for the 20.0 mm measurement
    The cube is not uniform
    The cube has been damaged
  • 1(c)[2]

    Use of uncertainty = half of the range (0.1 mm)

    Or use of uncertainty = max difference from mean

    Percentage uncertainty = 0.5% rounded to 1 or 2 s.f.

    Example of calculation

    Uncertainty = (20.3 mm – 20.1 mm) / 2 = 0.1 mm

    Percentage uncertainty = (0.1 mm / 20.2 mm) × 100% = 0.5%

  • 1(d)(i)[4]

    Converts mm to m and g to kg
    Use of volume = length × width × height
    Use of density = mass / volume
    Density = 8830 (kg m–3)

    Example of calculation

    Volume = length × width × height

    Volume = 0.0202 m × 0.0203 m × 0.0201 m = 8.24 × 10–6 m3

    Density = mass / volume

    Density = 0.0728 kg / 8.24 × 10–6 m3 = 8834.95 kg m–3

  • 1(d)(ii)[3]

    EITHER

    Calculates 2% range of uncertainty in density
    Calculates upper and lower limits of density values
    Metal is copper as it has a density within the range

    MP3 dependent on MP2

    OR

    Calculates percentage difference between density from 1(d)(i) and table value
    ... for all three metals
    Metal is copper as it has a percentage difference < 2%

    MP3 dependent on MP2

    Allow ecf for the use of 8800 kg m–3 or their value from (d)(i)

    Example of calculation

    Upper limit = 8833 kg m–3 × 1.02 = 9010 kg m–3

    Lower limit = 8833 kg m–3 × 0.98 = 8656 kg m–3

    OR

    Percentage difference = ((8940 kg m–3 – 8830 kg m–3) / 8830 kg m–3) × 100%

    Percentage difference =1.25%

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.