Physics · May / June 2022 · Paper 31 · Question 1
YPH11
As printed in the paper
The question as text
1 A student was given a collection of old coins. She placed the coins alongside a ruler, as shown, to determine the diameter and thickness of the coins. 20 coins
Read automatically from the paper; the printed page above is exact.
Show the answer and mark scheme
1(a)[4]
Determines the average coin radius/diameter using at least five coins
Use of 𝑉𝑉= π𝑟𝑟2𝑡𝑡
Determines the average coin thickness using all 20 coins
Or use of 𝑉𝑉= π
4 𝑡𝑡
𝑑𝑑2
𝑉𝑉 between 1.14×10–6 and 1.22×10–6 m3
Example of calculation
Total length of 10 coins = 30.2 cm
Average coin radius = 0.0151 m
Total height of 20 coins = 3.3 cm
𝑉𝑉= π𝑟𝑟2𝑡𝑡
𝑉𝑉= π × (0.0151 m) 2 × 0.00165 m
Average coin thickness = 0.00165 m
𝑉𝑉= 1.18×10–6 m3
Use of 𝜌𝜌= 𝑚𝑚𝑉𝑉
⁄
𝜌𝜌 between 8000 and 8600 kg m–3
1(b)[2]
Allow ecf for V from 1(a) for both marks.
𝜌𝜌= 𝑚𝑚𝑉𝑉
⁄
Example of calculation
𝜌𝜌= 0.0098 kg 1.18 × 10–6
⁄
m3
𝜌𝜌= 8300 kg m–3
1(c)[2]
EITHER
Calculates values for 2% range of the density of brass
Statement comparing this with 1(b) and relevant conclusion made
OR
Calculates percentage difference between 8550 kg m−3 and the density from 1(b)
Statement comparing this with 2% and relevant conclusion made
Example of calculation
8550 kg m–3 × 1.02 = 8721 kg m–3
8550 kg m–3 × 0.98 = 8379 kg m–3
1(d)[4]
EITHER
Use of a displacement can filled with water
Multiple coins added and volume of displaced water measured using a measuring
cylinder
Volume of displaced water divided by number of coins
Coins added slowly to prevent splashing
Or measuring cylinder read at eye level to avoid parallax
Or ensure measuring cylinder is vertical
Or displacement can is filled until overflowing and waits until drips stop
OR
Use of a measuring cylinder part filled with water
Multiple coins added and the change in volume recorded
Volume of displaced water divided by number of coins
Coins added slowly to prevent splashing
Or measuring cylinder read at eye level to avoid parallax
Or ensure measuring cylinder is vertical
OR
Use of vernier/digital calipers
Or use of a micrometer (screw gauge)
Multiple coins measured
Or multiple positions measured on the same coin
Mean radius/diameter and thickness/height calculated
Corrects/checks for zero error in the measuring device
Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.

