Note AcademyNote Academy

Chemistry · Oct / Nov 2023 · Paper 41 · Question 18

YCH11

As printed in the paper

The question as text

18 Pentanoic acid, C4H9COOH, is a carboxylic acid with Ka = 1.38 × 10–5 mol dm–3. A student was asked to titrate 25.0 cm3 of 0.120 mol dm–3 pentanoic acid solution with 0.100 mol dm–3 potassium hydroxide solution. The equation for the reaction is shown. C4H9COOH + KOH → C4H9COO–K+ + H2O The teacher asked the student to sketch a graph showing the expected changes in pH as potassium hydroxide solution is added. The student first identified four key points for the sketch graph, using four calculations and one chemical equation. These points are shown. 14 13 12 Key point 4 11 10 9 Key point 3 8 pH 7 6 5 4 Key point 2 3 2 Key point 1 1 0 0 5 10 15 20 25 30 35 40 45 50 Volume of KOH(aq) / cm3

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 18(a)(i)[3]

    Allow any alternative methods

    Ignore throughout ‒log100.00120 = 2.9

    Route 1 – Solving the expression to find [H+]

    Ka = [C4H9COO–][H+]

    M1 expression for Ka

    [C4H9COOH]

    Allow use of [H+]2 [HA] and / or [A–]

    Allow correct rearranged expression

    = √1.38 × 10–5 × 0.12 This also scores M1

    M2 uses expression to calculate [H+]

    = 0.0012869 / 1.2869 × 10‒3 (mol dm–3)

    Then

    Either

    = ‒log100.0012869

    M3 calculates pH

    = 2.8905 / 2.9

    Or

    = 0.0012589 / 1.2589 × 10‒3

    M3 calculates [H+] from given pH

    Or

    = 0.00128692 = 0.12001

    M3 calculates [C4H9COOH]

    1.38 × 10‒5

    Or

    pH = pKa + log10([CH3COO‒] / [CH3COOH])

    M3 uses HendersonHasselbalch equation to find pH

    or

    pH = ‒log10Ka + log10 [CH3COO‒] ‒ log10 [CH3COOH]

    or

    pH = ‒log10(0.0000138) + log100.0012869 ‒ log100.12

    and

    pH = 4.8601 + ‒2.8905 + 0.92082 = 2.8904

    Route 2 – Equating expression for [H+] to expression for pH

    Ka = [C4H9COO–][H+]

    [C4H9COOH]

    expression for Ka

    pH = ‒log10[H+] or [H+] = 10‒pH

    gives a mathematical expression relating pH and [H+]

    10‒2.9 = √1.38 × 10–5 × 0.12

    equates expression to calculate [H+] to 10‒pH

    or

    or

    2.9 = ‒log10√1.38 × 10–5 × 0.12

    equates expression to calculate [H+] to pH

    Do not award a statement that ‒log100.00120 = 2.9

  • 18(a)(ii)[2]

    An answer that makes reference to the following points:

    Allow alternative methods

    Allow TE throughout as long as the final pH is less than

    13 and greater than 9

    EITHER

    Route 1

    Kw = [H+][OH‒]

    estimates concentration of H+

    [H+] = 1.0 × 10‒14 ÷ 0.1 = 1.0 × 10‒13 (mol dm‒3)

    pH = 13

    calculates pH

    and

    so pH must be less than 13 as concentration diluted (by

    Ignore incomplete dissociation of alkali

    pentanoic acid solution / by reaction with pentanoic

    acid)

    OR

    Route 2

    = ‒log10[OH‒] = 1

    estimates pOH

    pH = 14 ‒ pOH = 13

    calculates pH

    and

    so pH must be less than 13 as concentration diluted (by

    Ignore incomplete dissociation of alkali

    pentanoic acid solution / by reaction with pentanoic

    acid)

    OR

    Route 3

    calculates the concentration of OH‒ in 75 cm3 assuming

    mol OH‒ = 0.1 × 50 × 10‒3 = 5 × 10‒3 (mol)

    none has reacted

    [OH‒] = 5 × 10‒3 ÷ 75 × 10‒3 = 0.066667 (mol dm‒3)

    ‒log10[OH‒] = 1.1761

    calculates pH of this concentration

    pH = 14 1.1761 = 12.824

    (which is less than 13)

    Or

    [H+] = 1.0 × 10‒14 ÷ 0.066667 = 1.5 × 10‒13

    pH = ‒log10[H+] = 12.824

    OR

    Route 4

    [OH‒] = moles of OH‒ added ‒ moles of pentanoic acid

    calculates concentration of OH‒ after addition of 50

    Volume of water

    cm3 to the pentanoic acid

    [OH‒] = 0.00500 ‒ 0.00300 = 0.026667 (mol dm‒3)

    75 ÷ 1000

    pOH = ‒log10[OH‒] = 1.574

    calculates pH

    pH = 14 ‒ pOH = 14 ‒ 1.574 = 12.426

    Or

    [H+] = 1.0 × 10‒14 ÷ 0.026667 = 3.75 × 10‒13

    pH = ‒log10[H+] = 12.426

    (which is less than 13)

  • 18(a)(iii)[2]

    Example of calculation

    (Neutralisation should occur at 30 cm3 because)

    calculation of number of moles of pentanoic acid

    = 0.12 × 25 = 0.003 / 3.0 × 10‒3 (mol)

    1000

    EITHER

    = 0.003 × 1000 = 30 (cm3)

    calculation of volume of potassium hydroxide

    0.1

    OR

    calculation of moles of potassium hydroxide assuming

    = 0.100 × 30 = 0.003 / 3.0 × 10‒3 (mol)

    volume is 30 cm3

    1000

  • 18(a)(iv)[1]

    An answer that makes reference to the following point:

    Accept

    the titration between a weak acid and a strong base

    the product of the neutralisation / the potassium

    (results in pH greater than 7 / alkaline pH

    pentanoate / the pentanoate ion / the salt of weak

    at the equivalence point)

    acid forms an alkaline solution when dissolved in

    water

    Allow

    C4H9COO‒ + H2O ⇌ C4H9COOH + OH‒

    Allow some H+ (from water) will combine with

    C4H9COO‒

  • 18(a)(v)[2]

    An answer that makes reference to the following points:

    at 15.0 cm3 the concentration of pentanoic acid and

    Accept this is the halfequivalence point

    Allow numbers of moles of both = 0.0015 (mol)

    pentanoate ion are equal / the pentanoic acid has been

    Allow concentration of both = 0.0375 (mol dm‒3)

    halfneutralised / this is the halfneutralisation point

    This can be scored from a full buffer calculation

    = –log10 1.38 × 10‒5 = 4.8601 / 4.9

    (at the halfneutralisation point) pH = pKa

    The value of 4.9 from a full buffer calculation scores M2

    and

    calculation of pH

    Ignore pH = –log10 1.2589 × 10‒5 = 4.9

    Ignore SF except 1SF

    Accept use of HendersonHasselbalch. All of the

    following would score M1 and the first half of M2

    pH = pKa + log100.0375

    0.0375

    pH = pKa + log101

    pH = pKa + 0

    Common incorrect calculations give values of 2.82, 3.14

    and 4.35. These will generally score (0) BUT look for

    both moles or both concentrations calculated to score

    M1

  • 18(b)[3]

    An answer that makes reference to the following points:

    because this region is a buffer / is the buffering region

    Do not award the addition of buffer

    Allow the concentration of pentanoic acid is high

    because there is a large reservoir of undissociated

    Ignore C4H9COOH and C4H9COO− are both present in

    pentanoic acid (and pentanoate ions) in solution

    solution

    EITHER

    Allow equations

    added OH‒ reacts with H+ and pentanoic acid dissociates

    H+ + OH− → H2O

    and

    C4H9COOH ⇌ C4H9COO− + H+

    Allow descriptions using formulae

    Allow ratio of [C4H9COO−] to [C4H9COOH] hardly

    keeping the concentration of H+ (almost) constant

    changes

    OR

    pentanoic acid reacts with the small quantity of

    Allow balanced equation

    hydroxide ions added

    C4H9COOH + OH− ⇌ C4H9COO− + H2O

    Allow descriptions using formulae

    and

    keeping the concentration of H+ (almost) constant

    Allow ratio of [C4H9COO−] to [C4H9COOH] hardly

    changes

    Ignore just quoting the HendersonHasselbalch equation

    without explanation

  • 18(c)(i)[3]

    An answer that makes reference to the following points:

    Allow answers describing colour at the pH values OR

    volumes of KOH(aq) added

    at the start of the titration the solution will be red

    Allow it will be red at key point 1

    Allow it will be red between key points 1 and 2

    Allow at / before pH 3.2

    it will change to orange before key point 2 / in the buffering

    Allow it changes to orange after adding a small volume / a

    region / at pH 3.2 and remains orange in the buffering

    few cm3 of KOH and remains orange until just before key

    point 2 / until about 20cm3 are added

    region / until about 25 cm3 of KOH is added / until the pH

    Allow it gradually changes (from red) to orange around

    reaches 4.4

    key point 2 / between and key points 1 and 2 / 3

    Allow any volume of KOH up to 5cm3 for the change to

    orange and from 1525 cm3 for change to yellow

    it will be yellow before the neutralisation point / before the

    Allow it changes to yellow before key point 3 / at key

    point 3 and stays yellow

    vertical portion of the graph / before key point 3 / when pH

    Allow it will be yellow at key point 3 and stays yellow

    is (about) 4.4 and is still yellow at key point 4

  • 18(c)(ii)[2]

    An answer that makes reference to the following points:

    M2 dependent on M1 OR the selection of bromocresol

    green or bromocresol blue or bromophenol blue (which

    will not score M1)

    bromothymol blue

    (at the neutralisation point) there is a mixture of yellow

    and blue forms (of the indicator) so the solution appears

    Allow indicator is yellow in acid and blue in alkali so

    green

    green (at the neutralisation point) is observed

    Allow indicator is yellow below pH 6.0 and blue above

    pH 7.6 and grren at the neutralisation point

    Allow green is between yellow in acid and blue in alkali

    (Total for Question 18 = 18 marks)

    (Total for Section C = 18 marks)

    Total for Paper = 90 marks

    Pearson Education Limited. Registered company number 872828

    with its registered office at 80 Strand, London, WC2R 0RL, United Kingdom

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.