Note AcademyNote Academy

Chemistry · Oct / Nov 2023 · Paper 31 · Question 3

YCH11

As printed in the paper

The question as text

3 Cyclohexene may be prepared from cyclohexanol using 85% phosphoric(V) acid. OH H3PO4 + H2O A simplified procedure for this preparation is shown. Step 1 Accurately weigh about 4 g of cyclohexanol into a pear‑shaped flask. Step 2 Add about 0.5 cm3 of 85% phosphoric(V) acid and a few anti‑bumping granules to the flask. Step 3 Set up the apparatus for fractional distillation. Step 4 Heat the flask and collect the distillate that contains impure cyclohexene and water. Step 5 Separate the impure cyclohexene and water, using a separating funnel. Step 6 Add a few granules of anhydrous calcium chloride to the impure cyclohexene and allow the mixture to stand. Step 7 Decant the impure cyclohexene into a clean pear‑shaped flask. Distil the cyclohexene and weigh the distillate. Data Boiling Molar mass Density Compound temperature / g mol−1 / g cm−3 / °C cyclohexanol 100 162 0.96 cyclohexene 82 83 0.81

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 3(a)(i)[1]

    An answer that makes reference to the following points:

    flammable symbol identified

    Allow inflammable

    Ignore combusts / burns easily

    and

    harmful to the environment symbol identified

    Allow alternatives to ‘harmful to’ e.g. ‘damages’ / ‘bad

    for’ / ‘poisonous’ / ‘toxic’ / ‘hazard’ to the environment

    Allow ‘living things’ / ‘organisms’ for ‘the

    environment’

    Ignore type of environment e.g. aquatic

    Ignore pollutes the environment

    Do not award ‘biohazard’

    Do not award symbols the wrong way round

    Do not award just ‘toxic’ / ‘poisonous’ / ‘harmful’

  • 3(a)(ii)[2]

    An answer that makes reference to the following points:

    Ignore use of fume cupboard, goggles, lab coat

    (cyclohexanol(flammable)) use an electric heater

    Accept isomantle

    Allow water bath / oil bath

    Allow ‘no (naked) flame / fire’

    Ignore ‘keep away from oxidising agents’

    Ignore keep away from Bunsen burner

    Accept do not pour the (organic) waste down the

    (cyclohexene (harmful to the environment)) use an

    sink / drain

    organic waste bottle / separate container

    Allow do not release into the environment

    Allow one use of ‘use small amounts’ in M1 or M2

    No TE on incorrect identification of hazard symbols

  • 3(b)[1]

    An answer that makes reference to the following:

    (antibumping granules) provides a nucleus on

    Accept provide a surface /site for bubbles to form on

    which gas bubbles grow

    Allow prevent local heating / superheating

    Allow ‘distribute the heat’

    Allow prevent the (sudden) production of large gas

    bubbles (which cause bumping)

    Allow ensures that gas bubbles are small

    Ignore stir the reaction mixture

    Ignore prevent flash boiling / sudden boiling

  • 3(c)[2]

    An answer that makes reference to the following points:

    (fractional distillation) gives better separation of the

    Allow (fractional distillation) is more effective /

    substances in the reaction flask (than simple

    efficient (than simple distillation)

    distillation)

    Allow just ‘better separation’ is achieved

    Allow purer product obtained

    Ignore reference to increased yield

    Ignore ‘more accurate’

    Ignore ‘similar boiling temperatures’

    (fractional distillation column) gives longer reaction

    Accept fractional distillation column acts like a reflux

    condenser

    time

    Accept cyclohexanol has a higher boiling temperature

    (than cyclohexene) so is returned to the flask,

    increasing reaction time / yield

    OR

    Allow to give (more) complete reaction

    ‘ better separation of cyclohexene and water’

    Just ‘ separation of cyclohexene and water’ scores (1)

    scores 2 marks

  • 3(d)[2]

    A diagram that shows the following:

    separating funnel

    The funnel must have a tap

    and

    have a neck capable of being closed with a stopper or a bung

    Allow round separating funnel

    Allow bung / stopper not shown

    Ignore tap at the top

    Do not award a filter funnel

    Do not award funnel without some sort of tapering at the

    neck

    Allow for (2)

    top layer labelled cyclohexene / organic

    and

    lower layer labelled water / aqueous

    Allow minor error in organic name e.g. cyclohexane

    Ignore ‘inorganic lower layer’

    Do not award if cyclohexanol is in the lower layer

  • 3(e)[2]

    An explanation that makes reference to the following points:

    (the organic layer) changes from cloudy to clear

    Allow just ‘becomes clear / transparent’

    Ignore ‘less cloudy’, clearer, more transparent

    Ignore white

    Ignore colourless

    Ignore the drying agent clumps together

    Ignore layers disappear

    (anhydrous calcium chloride) removes

    Accept (anhydrous calcium chloride) dries the

    the (traces of) water

    cyclohexene

    Allow (anhydrous) calcium chloride is a

    drying agent

    Ignore calcium chloride becomes hydrated

  • 3(f)[1]

    An answer that makes reference to the following point:

    lower temperature within a suitable range

    79−82 (ºC)

    and

    upper temperature within a suitable range

    84−88 (ºC)

    Do not award a range which starts or ends with 83 (ºC)

  • 3(g)[2]

    Example of calculation

    calculation of mass of cyclohexene formed from 3.96 g

    100 g of cyclohexanol forms 82 g of cyclohexene

    of cyclohexanol with 100% yield

    and

    (so) 3.96 g forms 3.96 × 82 ÷ 100 = 3.2472 (g)

    calculation of percentage yield

    % yield = 100 × 2.09 ÷ 3.2472 = 64.363%

    Method using calculation of moles

    mol of cyclohexanol = 3.96 ÷ 100

    = 3.96 × 10−2 / 0.0396

    = mol cyclohexene

    mass of cyclohexene for 100% yield

    = 82 × 0.0396 = 3.2472 (g) (1)

    % yield = 100 × 2.09 ÷ 3.2472

    = 64.363% (1)

    Ignore SF except 1 SF

    TE for numerical errors in M1 unless %>100

    Allow any correct method

    Correct answer with some working scores (2)

    100 x 2.09 ÷3.96 = 52.778% scores zero

  • 3(h)[2]

    An answer that makes reference to the following points:

    Observations

    any three correct observations

    Test

    cyclohexanol

    cyclohexene

    fourth correct observation

    addition of

    no change / no

    steamy / misty /

    phosphorus(V)

    reaction /

    white fumes

    chloride

    no observation

    brown /orange /

    brown / orange /

    addition of

    yellow Br2(aq)

    yellow Br2(aq)

    bromine water

    unchanged

    turns colourless

    For PCl5 do not award white smoke

    For Br2(aq) and cyclohexanol allow no change / no

    reaction / no observation

    For Br2(aq) and cyclohexene allow just ‘decolourised’ /

    ‘turns colourless’

    Do not award red or redbrown for colour of Br2(aq)

    Do not award additional incorrect observations

    (Total for Question 3 = 15 marks)

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.