Chemistry · May / June 2023 · Paper 61 · Question 4
YCH11
As printed in the paper
The question as text
4 A group of students prepared methyl 3‑nitrobenzoate by the nitration of methyl benzoate. CH3 CH3 O O O O C C + HNO3 + H2O NO2 Procedure Step 1 Measure 9 cm3 of concentrated sulfuric acid into a small, dry conical flask. Label the flask A and place it in an ice bath. Step 2 Add 4.0 cm3 of methyl benzoate to flask A. Gently swirl the flask. Step 3 Mix 3 cm3 of concentrated nitric acid and 3 cm3 of concentrated sulfuric acid in a test tube to form the nitrating mixture. Place this test tube in the ice bath. Step 4 Place a thermometer in flask A. Add the nitrating mixture very slowly to flask A using a dropping pipette. Take care to ensure that the temperature of the flask contents does not rise above 15 °C. Step 5 Remove flask A from the ice bath and allow it to stand at room temperature for about 10 minutes. Pour the reaction mixture into a small beaker containing crushed ice. Stir the contents of the beaker with a glass rod. Step 6 Allow the ice to melt. Separate the solid methyl 3‑nitrobenzoate by suction filtration. Wash the solid with a small amount of deionised water and then with a little ice‑cold ethanol. Step 7 Recrystallise the methyl 3‑nitrobenzoate using ethanol as the solvent. Step 8 Determine the melting temperature of the purified crystals of methyl 3‑nitrobenzoate.
Read automatically from the paper; the printed page above is exact.
Show the answer and mark scheme
4(a)[1]
more effective cooling because greater (surface area)Allow more quickly / more efficiently for effective
contact
Allow reverse argument
Do not award reduced risk of explosion
4(b)[1]
An answer that makes reference to the following point:
Accept displayed / structural / skeletal or any
combination of
suitable nitrated methyl benzoate structureAllow the 2nitro or the 4nitro isomer such as
or
Allow any dinitrated isomer
Allow any trinitrated isomer such as
Ignore structure of methyl 3nitrobenzoate
Ignore water
4(c)[3]
An answer that makes reference to the following points:
May be shown on diagram
no / needs filter paper (in the Buchner funnel)Ignore just no solid on filter paper
Ignore just filter paper should be flat
no / needs side arm on the flaskAllow needs a Buchner flask / no outlet on the flask
Ignore just not connected (to pump)
Do not award round bottom flask
Allow vacuum / Venturi tube / tap vacuum
no / needs pump (to reduce the pressure)Ignore flask should be extra thick to withstand
vacuum
4(d)[4]
A description that makes reference to the following points:
dissolve (solid) in the minimum (volume) of hot ethanolAllow solvent for ethanol
Ignore warm
(hot) (gravity) filtration to remove insoluble impuritiesAllow crystallise
cool (solution) to precipitate the solid / methyl 3nitrobenzoate
Ignore any washing comments
(suction) filtration to remove the soluble impuritiesAn answer that makes reference to the following point:
4(e)(i)[1]
difficult to separate the solid drying agent from theAllow difficult to dry a solid with another solid
product
Allow would contaminate or make product impure
Ignore they are both solids
Do not award reacts with the product
4(e)(ii)[1]
An answer that makes reference to the following point:
suitable drying method such as desiccator / (warm) ovenAllow use filter paper / paper towel
Allow leave (in a warm place) to dry
Ignore leave in a cool place
Do not award hot oven
Example of calculation:
4(f)[3]
Method 1
evaluation of mass of methyl benzoatem = (1.08 × 4 =) 4.32 (g)
n = (4.32 ÷ 136 =) 0.031765 (mol)
evaluation of moles of methyl benzoateevaluation of mass of methyl 3nitrobenzoatem = (0.0317647 × 181 =) 5.7494 / 5.75 (g)
and
and
% = ((3.05 ÷ 5.75) × 100 =) 53.043 / 53%
percentage yield
or
n = (3.05 ÷ 181 =) 0.016851 (mol)
evaluation of moles of moles of methyl 3nitrobenzoate
and
and
% = ((0.016851 ÷ 0.0317647) × 100 =) 53.043 / 53%
percentage yield
Accept 53.049% from keeping values in calculator
Method 2
m = (1.08 × 4 =) 4.32 (g)
evaluation of mass of methyl benzoatem = ((181 ÷ 136) × 4.32 =) 5.7494 / 5.75 (g)
evaluation of maximum mass% = ((3.05 ÷ 5.75) × 100 =) 53.043 / 53%
percentage yieldIgnore SF except 1 SF
Allow TE throughout but do not allow M3 if yield is
higher than 100%
Allow 53% scores 3
An answer that makes reference to the following points:
4(g)[2]
Mark independently
any melting temperature range of 4 or more degrees andhigher figure 7079oC and lower figure no lower than 65oC
Ignore comments about sharp
impurities make the melting temperature range lower andwider
(Total for Question 4 = 16 marks)
TOTAL FOR PAPER = 50 MARKS
Pearson Education Limited. Registered company number 872828
with its registered office at 80 Strand, London, WC2R 0RL, United Kingdom
Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.

