Chemistry · May / June 2023 · Paper 61 · Question 3
YCH11
As printed in the paper
The question as text
3 This question is about an experiment to investigate the kinetics of the reaction between iodine and propanone with an acid catalyst. The equation for the reaction is shown. I2(aq) + CH3COCH3(aq) + H+(aq) → CH3COCH2I(aq) + 2H+(aq) + I–(aq) To obtain the order of reaction with respect to iodine, the concentration of iodine in the reaction mixture was determined at various times. Procedure Step 1 Mix 25 cm3 of 1.0 mol dm−3 sulfuric acid with 25 cm3 of 1.0 mol dm−3 propanone in a beaker. Step 2 Start a clock as 50 cm3 of 0.020 mol dm−3 iodine solution is added to the beaker. Mix the reactants thoroughly. Step 3 Tip a spatula measure of sodium hydrogencarbonate into a conical flask. After 3 minutes, pipette a 10.0 cm3 sample of the reaction mixture into the conical flask and mix thoroughly. Step 4 Titrate the iodine in the sample with 0.010 mol dm−3 sodium thiosulfate solution using a suitable indicator. Record the titre. Step 5 Repeat Steps 3 and 4 every 3 minutes to obtain four more titres.
Read automatically from the paper; the printed page above is exact.
Show the answer and mark scheme
3(a)[1]
only the iodine concentration affects the rateAllow so only the iodine concentration changes
(significantly)
OR
Allow [H+] and [CH3COCH3] do not change
so the concentrations of sulfuric acid and propanone do
not affect the rate
(significantly) / (effectively) zero order (wrt [H+]
and [CH3COCH3])
Ignore just concentrations of H2SO4 and
CH3COCH3 are in excess
Ignore comments on limiting reagents
An answer that makes reference to the following point:
3(b)[1]
Allow neutralise/remove the (sulfuric) acid/H+
to stop / quench the reaction(catalyst)
Ignore slow the reaction
Do not award to remove OH
3(c)[2]
An answer that makes reference to the following points:
M2 is dependent on M1
(indicator) starch (solution)Ignore colour before addition of starch
(colour change) blueblack/(dark)blue/black to colourlessExample of graph:
3(d)(i)[3]
axes labelled correctly with units and suitablePoints plotted must cover at least 50% of the graph in both
directions
scale
Allow ±1 small square
all points plotted correctlyIgnore extrapolation
best fit straight lineAn answer that makes reference to the following point:
3(d)(ii)[1]
the volume of (sodium) thiosulfate / titre is (directly)Allow they are (directly) proportional
proportional to the concentration of iodine
Ignore any comments on correlation
3(d)(iii)[1]
An answer that makes reference to the following point:
zero (order) / 0and
straight line (with a negative gradient) graph
Accept rate is proportional to 1/time
Accept changes to iodine concentration have no
affect on rate
Accept zero order and gradient is constant
Ignore reference to sign of gradient
NOTE: the order wrt iodine must be used in (e)(ii)
COMMENT: allow linear for straight line
3(e)(i)[2]
An answer that makes reference to the following points:
working shown on graph for two half livesAllow a range of 6 – 9 (seconds)
two halflives of 7 and 8 (seconds)Ignore references to constant half life
Do not award minutes / min
An answer that makes reference to the following point:
3(e)(ii)[1]
Allow r for rate
Allow H2SO4 / acid for H+
rate = k[CH3COCH3][H+]Allow names for formulae
Accept inclusion of ‘1’ for powers
Allow TE from diii
Ignore inclusion of [I2]0
NOTE: The order wrt to iodine must be consistent
with the answer in 3(d)(iii)
Ignore state symbols even if incorrect
(Total for Question 3 = 12 marks)
An answer that makes reference to the following point:
Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.

