Chemistry (AS & A Level) · May / June 2026 · Paper 52 · Question 1
9701
As printed in the paper
The question as text
Under certain conditions, iodine forms a series of polyiodide anions with the formula q2h+1 –, where h is an integer. This question is about the preparation of a polyiodide salt, (CH3)4Nq2h+1. After preparing the polyiodide salt, the value of h in (CH3)4Nq2h+1 is found by titration. (CH3)4Nq2h+1 is formed when tetramethylammonium iodide, (CH3)4Nq, reacts with methanolic iodine solution, q2(meth). (CH3)4Nq + hq2 (CH3)4Nq2h+1
Read automatically from the paper; the printed page above is exact.
Show the answer and mark scheme
1(a)(i)[1]
7.61 g 1 0.300 × 100/1000 × 253.8 A 7.614 R 7.62 or 127 or 254 used in working A 7.6 but only if there is no evidence of 7.62 / 127 / 254
1(a)(ii)[3]
M1 dissolve the solid / I2 (s) (in the beaker) (using a small volume of) methanol M2 transfer/add to a (100 cm3 volumetric) flask AND rinse (with methanol) M3 top the 100 cm3 volumetric flask up to mark (with methanol) AND invert the (stoppered) flask 3 M1 is the dissolving mark M2 is the transfer with rinsing mark into a flask M3 is volumetric apparatus and inversion mark (we need 100 cm3 AND volumetric flask seen somewhere) M1 and M2 could still be awarded if another type of flask (e.g. conical) is used – but must be a flask not a beaker / measuring cylinder M1 I ‘weigh the solid’ I mass / mol I2 if seen I ‘place in a beaker’ (assume they are repeating the question) but if they transfer the solid to a second container, evidence of rinsing is needed to allow M1 M1 R if it is assumed I2 is aqueous/in methanol M1 R if suggestion is to add more than 50 cm3 of methanol or to fill the beaker to dissolve solid in the beaker. Any volume quoted must be 50 cm3 or less. A prepare / make a solution for dissolve. If dissolve not seen here, A ‘transfer the solution’ in M2 to be equivalent to ‘dissolve’ in M1 ie they must have dissolved in M1 if they are transferring a solution in M2. M2 A graduated flask for volumetric flask A extra transfers as long as the exact number of moles of solid end up in the vol flask via rinsing. Assume ‘rinse’ / ‘wash’ is into flask unless stated I lack of rinsing the funnel M2 R if transfer of solution from M1 is via burette/pipette assume ‘rinse the residue’ refers to residual solution in the beaker M3 A make up to 100 cm3 with methanol. I ‘top up’ without reference to 100 A ‘fill the flask to 100 cm3 / mark’ but R ‘fill the flask’ (alone) for ‘invert the flask’ A ‘shake’, ‘swirl’ etc I Homogenise (alone) I ‘mix’ (alone) /‘mix the flask’ (we need to know how they mix/homogenise) R stir in the flask Guidance A max 2 marks if solid is added directly into the volumetric flask M1 is not awarded M2 rinsing of beaker is still needed to ensure all the solid is put into the vol flask M3 OK If they fill volumetric flask to the mark / add 100 cm3 of methanol and then add solid A max 1 mark: M1 is not awarded M2 is not awarded (because they cannot rinse into a full flask) M3 still possible for 100 cm3 volumetric flask AND methanol AND invert to gain credit ‘100 cm3 volumetric flask’ needs to be seen in M2 or M3 for M3 to be awarded Methanol needs to be seen at least once in M1, M2 or M3 without methanol 3 marks = 2 marks, 2 marks = 1 and 1 mark = 0 marks. methanol must be seen once to award M1 if not directly used in M1 max 2 marks if (distilled) water is used as the solvent
1(b)(i)[1]
methanol is flammable 1 A inflammable for flammable R non-flammable A other comments implying the flammability of methanol e.g. methanol vapours ignite A solution / I2 (meth) / substance is flammable A solvent is flammable I I2 (alone) is flammable A tetramethylammonium iodide / (CH3) 4NI is flammable A reactants are flammable A contents are flammable A polyiodide salt / (CH3) 4NI2n+1 is flammable A product(s) are flammable I ‘(it is) flammable’ alone (not specifying whether it is the contents or the flask which is flammable) I references to explosions I to reduce evaporation of methanol / prevent methanol boiling I (CH3) 4NI / reactant will (thermally) decompose I to avoid spitting I flask shattering / flask breaking
1(b)(ii)[1]
to remove any soluble impurities 1 A to remove impurites / to remove reactants / I2 / I2 (meth) / (CH3) 4NI A to remove solute(s) / A to remove solution(s) A to remove (methanol-)soluble substances (no need to tell us what the substances are) I to remove substances (alone) I to remove filtrate R to remove product / residue / solid impurities R to remove methanol / solvent / water
1(b)(iii)[1]
leave (to dry) AND until constant mass 1 A description of leaving until constant mass e.g. keep on weighing until constant mass e.g. weigh every 5 minutes until constant mass e.g. dry to constant mass e.g. repeat drying and weighing until a constant mass is obtained e.g. wait until constant mass R heating or methods which do not reflect step 6 (where heating does not occur) e.g. heat to constant mass / place in an oven until constant mass / leave in a warm place I use of cobalt chloride paper / desiccator R leave until constant volume R constant weight for constant mass
1(b)(iv)[2]
M1 suitable results table showing rows which include:
mass of (evaporating) basinmass of (evaporating) basin + crystalsmass of crystalswith column to enter valuesunits i.e. ‘g’ e.g. mass of (evaporating) basin / g mass of (evaporating) basin + crystals / g mass of crystals / g 2 mark table first the table may be vertical as well as horizontal A ‘weight’ for ‘mass’ in this question only ‘mass’ must be seen in table A dish for basin A any table that has: mass of dish / weighing boat / any container + crystals mass of dish / weighing boat / any container (ignore ‘+ residue’) mass of crystals / product / (CH3) 4NI2n+1 / solid units i.e. ‘g’ A rows 1 and 2 in any order I other rows R tables which do not have a container R tables which do not measure mass of crystals (e.g. tables which only measure mass change due to methanol/water loss e.g. ‘wet crystals to dry crystals) I mass change due to solvent loss as extra row(s) R tables which measure mass of stated substance other than crystal/product e.g. I2 allow units in value box (as shown) mass Mass of evaporating basin g Guidance M2 description of correct method used in obtaining mass of dry crystalsWeigh an evaporating basin(Transfer the dry crystals from the filter paper to the evaporating basin and) reweigh the evaporating basin + crystals. A as an alternative description of correct method for M2:weigh an evaporating basin + crystalsrinse and dry the evaporating basin and reweigh I descriptions of maths involved in determining mass of crystals other methods which involve transfer of crystal from the original basin into another container (might be a basin) will not score M2 e.g.weigh a weighing boat (or other container)transfer the crystals from the evaporating basin to the weighing boat / container and reweigh weighing boat/container1(c)(i)[1]
0.0200 mol dm–3 Na2S2O3 (aq) 1 A Na2S2O3 (aq) / aqueous sodium thiosulfate / 0.02 mol dm–3 Na2S2O3 A sodium thiosulfate / Na2S2O3 alone without aqueous A rinse with solution to be used in the burette I slips in concentration e.g. 0.2 mol dm–3 I rinsing with distilled water or organic drying solvent e.g. propanone before rinsing with Na2S2O3 (aq). R rinsing with anything else after Na2S2O3 (aq). R incorrect formulae R ‘rinse with water/ Na2S2O3 (aq)’ (too vague)
1(c)(ii)[1]
Working must be shown. = 2 0.05 13.35 × × 100 = 0.749% 1 (0.05 × 2) may be seen separate or as (0.1 / 2 × 2) I 0.1 as numerator without evidence of 0.05 A Any correct answer that rounds to 0.7 i.e. A 0.7 / 0.74 / 0.749 A 0.75 / 0.750 I missing ‘x 100’ in calculation if correct answer seen I Rounding errors beyond 1st SF R 0.0749 this must mean 0.005 was used in the working R incorrect answers with correct working Titre used must be 13.35
1(c)(iii)[1]
13.30 cm3 1 I 13.3
1(c)(iv)[3]
M1 mol of Na2S2O3 in mean titre = 13.30 cm3 × 0.02 / 1000 = 2.66 × 10-4 mol M2 mol of I2 in 10 cm3 of solution A = 2.66 × 10-4 / 2=1.33 × 10-4 mol and mol of I2 in 100 cm3 of solution A =1.33 × 10-4 mol × 100 / 10 =1.33 × 10-3 mol M3 mass of I2 in 100 cm3 of solution A = 1.33 × 10-3 × 253.8 =0.338 g 3 A 3 marks for 0.338 if no evidence of incorrect working. I minor transcription errors A 0.338 up to calculator value (0.337554) I RE after 3rd SF A 2SF as final answer if 3SF or more correct answer seen in working Otherwise mark by step. M2 subsumes M1 A ecf for mean titre from 1 (c) (iii) A
M2 for ecf of M1 A
M3 for ecf of M2 A Use of 254 A ecf for use of 126.9 / 127 for Mr I2 if used in 1 (a) (i) Scaling up by 100 / 10 appears in step 2, but can appear in any step. A mole ratio methods involving concentration × volume of solutions C1 × V1 C1 = [I2 (aq)] in solution A V1 = volume solution A C2 × V2 C2 = [Na2S2O3 (aq)] V2 = volume Na2S2O3 (aq) concentration of I2 (in soln A) × volume I2 (soln A) = 1 concentration of Na2S2O3 × volume Na2S2O3 2 concentration of I2 × 10.00 = 1 0.0200 × volume Na2S2O3 2 This leads to [I2 (aq)] in solution A = 0.0133 mol dm–3 M1 ✓ Moles of I2 in 100 cm3 of solution A = 0.0133 100 / 1000 = 1.33 × 10–3 M2 ✓ (M2 subsumes M1) 1.33 × 10-3 × 253.8 = 0.338 g M3 ✓ Other methods may be used.
1(c)(v)[1]
Working must be shown. mol I2 = 0.338 / 253.8 = 0.00133 mol I2 mass (CH3) 4NI = 0.472 – 0.338 = 0.134 g mol (CH3) 4NI = 0.134/200.9 = 0.000667 mol ratio = 0.00133 = 1.99… (= 2) 0.000667 AND n = 2 1 The mass (or substitute value) of I2 from 1 (c) (iv) must be used or a derived number of moles from this value must be seen (moles may be seen in M2 of 1 (c) (iv)) A ecf from 1 (c) (iv) for 0.338 (mass of I2) A ecf for Mr I2 = 126.9 / 127 if 126.9 / 127 was used in 1 (a) (i) Apply the following formulas to help If 253.8 is used as Mr I2 n = 0.7916 × a where a = answer to (c) (iv) (0.472–a) If 126.9 is used as Mr I2 n = 1.583 x a where a = answer to (c) (iv) (0.472–a) A as minimum seen for working: 0.338 / 253.8 and (0.472 – 0.338) / 200.9 or 0.134 / 200.9 or 0.00133 mol I2 and 0.000667 mol of (CH3) 4NI or 1.99… A mol of I2 = 0.00133 or mol of I2 derived from incorrect mass of I2 in 1 (c) (iv) and A mol of (CH3) 4NI = 0.000667 or mol of (CH3) 4NI derived from incorrect mass of I2 in 1 (c) (iv) Using given 0.374 g as the mass of I2 gives n = 3. Other methods may be used.
Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.

