Chemistry (AS & A Level) · May / June 2026 · Paper 51 · Question 1
9701
As printed in the paper
The question as text
Solid mixture X contains only anhydrous calcium chloride, CaCt 2, and anhydrous calcium nitrate, Ca(NO3)2. An experiment is done to find the percentage by mass of Ca(NO3)2 in the mixture. step 1 Weigh an empty crucible. Add approximately 5 g of mixture X to the crucible. step 2 Reweigh the crucible with mixture X. step 3 Heat the crucible gently for one minute and then strongly for four minutes. The calcium nitrate decomposes. 2Ca(NO3)2(s) 2CaO(s) + 4NO2(g) + O2(g) step 4 Allow the crucible to cool. Reweigh the crucible and contents.
Read automatically from the paper; the printed page above is exact.
Show the answer and mark scheme
1(a)[1]
pipeclay triangle 1 A clay triangle / clay pipe triangle / triangle clay pipe I tripod, gauze, triangular holder
1(b)[1]
to prevent spitting 1 A to prevent cracking / damaging / breaking crucible A to prevent losing solid / (mixture) X / solid jumping out (of crucible) A to prevent splitting A CaCl2 or Ca(NO3) 2 for solid R burning
1(c)[1]
NO2 is a hazardous gas 1 A NO2 gas is toxic / poisonous / acidic / corrosive A NO2 is an irritant to eyes / by inhaling A NO2 (g) for NO2 gas I flammable, harmful R answers about O2
1(d)(i)[2]
M1 mass lost on heating is 17.81 – 16.53 g = 1.28 g relative molecular mass of (4NO2 + O2) = 216.0 1.28 g is 1.28 / 216 mol = 0.005926 mol of (4NO2 + O2) M2 number of moles NO2 = 4 × 0.005926 = 0.0237 mol 2 award 2 marks for 0.0237 award 1 marks for 0.0278, 0.0618, 0.135 and 0.0156 1.28 g is NO2 and O2 in the ratio of 4:1 relative mass of (4NO2 + O2) = 4 × 14.0 + 10 × 16.0 = 216.0 g mol–1 1.28 g is 1.28 / 216 mol = 0.005926 mol of (4NO2 + O2) NO2 is ×4 this. A 2 or more SF ecf from incorrect M1: A a number of moles × 4 [A if assume all gas released to be NO2 = 0.0278 mol A if 5.07 g is assumed to be all Ca(NO3) 2 then 5.07 / 164.1 = 0.0309 mol Ca(NO3) 2 so 2 × 0.0309 = 0.0618 mol A if 3.79 g is assumed to be CaO so 3.79 / 56.1 = 0.06756 mol CaO then 2 × 0.06756 = 0.135 mol A if 1.28 g is assumed to be Ca(NO3) 2 then 1.28 / 164.1 = 0.00780 mol Ca(NO3) 2 so 2 × 0.0078 = 0.0156 mol]
1(d)(ii)[1]
Correct working must be shown. percentage error = (2 × 0.005 / 17.81) × 100 % = 0.0561 1 A the following values are amongst acceptable values for the answer following a correct expression 0.06, 0.056, 0.05 etc. I ignore missing × 100 if correct answer is given (2 × 0.005) may be seen as (0.01 / 2 × 2)
1(d)(iii)[1]
increase the mass of mixture X used 1 A any wording that implies increasing the mass of X e.g. weigh a larger sample / reactant / contents A use a bigger amount of X / Use a larger quantity of X / use more X etc. A use a larger mass of ‘crucible + X’ A ‘use a larger mass’ or more than 5.07 g I ‘use a large mass’ alone I repeat and take mean I changes to heating e.g. heat for longer R more accurate balance or any other change to apparatus e.g. increase mass of crucible alone R incorrect use of weight for mass R heat to constant mass
1(e)[2]
M1 mol of Ca(NO3) 2 in original sample = 0.5 × 0.0223 mol = 0.01115 mol M2 mass Ca(NO3) 2 in original sample = 0.01115 mol × 164.1 g mol–1 = 1.829715 g % by mass Ca(NO3) 2 = 1.829715 / 4.98 × 100% = 36.7% 2 award 2 marks for 36.7 A more SF e.g. 1.829715 g 36.741265% A 36.7 rounded to 37 for M2 I rounding errors after 3SF. If M1 is rounded to 0.0112 mol and then used in M2 award M1 only ecf for M2 from incorrect M1 and allow final answer to be rounded to 2SF
1(f)(i)[1]
heat to constant mass 1 A description of the process of heating to constant mass e.g. reheat and reweigh until mass remains constant A repeat steps 3 and 4 to constant mass response must include (re)heat and constant mass
1(f)(ii)[1]
The percentage by mass will be smaller. AND mass of gas lost is smaller (than the maximum possible) OR mass of solid remaining after heating is higher (than actual mass) 1 A NO2 or O2 or both for gas A amount / mol for mass I not all NO2 released I calculated mass of Ca(NO3) 2 (that decomposes) is lower than actual value
1(g)[2]
M1 attempted use of ice / cold water for condensing the gas without loss of the NO2 as gas M2 in an unsealed collection vessel surrounded by iced / cold water 2 M1 A coolant/cool water for ice If a condenser is seen, max 1 mark
must be angled downwards towards unsealed collection vesselmust show water in and out of jacketignore position of water in and outcondensed NO2 must be delivered into a vessel surrounded by ice/cold water. If a condenser is delivering into a u-tube and ice, then 2 marks can be awarded.
Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.

