Note AcademyNote Academy

Chemistry (AS & A Level) · May / June 2025 · Paper 52 · Question 2

9701

As printed in the paper

The question as text

The enthalpy change of combustion, ΔHc, of butane, C4H10, can be determined using the apparatus shown in Fig. 2.1. metal can thermometer water tap gas container of butane tripod gas burner Fig. 2.1 The following steps are carried out. step 1 Use a 500 cm3 measuring cylinder to transfer 320 cm3 of water into a metal can. step 2 Place a thermometer into the water. Record the initial temperature of the water in the metal can. step 3 Weigh the gas container with burner and record the initial mass. step 4 Set up the apparatus as shown in Fig. 2.1. step 5 Light the burner and allow the flame to heat the water in the metal can for three minutes. step 6 Switch off the burner and record the maximum temperature reached. step 7 When cool, reweigh the gas container with burner and record the final mass. The results are shown in Table 2.1. Table 2.1 initial temperature of water / tC maximum temperature of water / tC change in temperature of water, ΔT / tC initial mass of gas container with burner / g final mass of gas container with burner / g mass of butane burned / g 19.3 76.6 183.56 181.46

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 2(a)[2]

    M1 change in temperature of water / °C = 57.3 M2 mass of butane burned / g = 2.10

  • 2(b)[1]

    320 g × 4.18 J g–1 K–1 × 57.3 K = 76 600 (J)

  • 2(c)[2]

    M1 number of moles of butane burned = 0.0362 mol M2 ∆Hc = –2120 (kJ mol–1)

  • 2(d)[1]

    stir the water before taking reading

  • 2(e)[1]

    2.5 / 320 × 100% = 0.78%

  • 2(f)[1]

    use a lid

  • 2(g)(i)[1]

    percentage error (of temperature change or mass change of butane) increases

  • 2(g)(ii)[1]

    less heat loss

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.