Physics · May / June 2025 · Paper 21 · Question 16
YPH11
As printed in the paper
The question as text
16 A student connected the circuit shown. X A 200 Ω 100 Ω V The battery has an e.m.f. of 6.00 V and negligible internal resistance.
Read automatically from the paper; the printed page above is exact.
Show the answer and mark scheme
16(a)[1]
6 J of energy is transferred to each coulomb of charge (by the
Accept:
battery)
6 V is the potential difference between the terminals of the
battery if no current is drawn
Terminal potential difference is 6 V (since internal resistance is
negligible)
p.d across 200 Ω resistor = 6.00 − 1.64 (= 4.36 V)
16(b)(i)[3]
Use of 𝑅𝑅=
𝑉𝑉
𝐼𝐼
200 Ω= 4.36 V
Or
Example of calculation
𝐼𝐼
𝐼𝐼=
200 Ω= 2.18 × 10−2 (A)
Ratio of resistance = ratio of p.d.
4.36 V
𝐼𝐼= 22 (mA)
Use of 𝑅𝑅=
𝑉𝑉
16(b)(ii)[3]
EITHER
𝐼𝐼 for resistance of parallel section
Show that value gives 456 Ω
Use of 𝑅𝑅=
𝑉𝑉
Or
𝐼𝐼 for resistance of total circuit and subtract 200 Ω
(MP3 dependent on MP2 being awarded)
Use of resistors in parallel equation.
𝑅𝑅X = 304 Ω
(Allow ecf from (b)(i))
Example of calculation
𝑅𝑅parallel =
2.18×10−2 A = 75.23 Ω show that value = 82 Ω
1.64 V
Use of 𝑅𝑅=
𝑉𝑉
OR
Use of 𝐼𝐼tot = 𝐼𝐼1 + 𝐼𝐼2 for current in resistor X
𝐼𝐼 for current in 100 Ω resistor
1
1
1
+
100 Ω=
𝑅𝑅= 304 Ω
𝑅𝑅X
75.23 Ω
𝑅𝑅X = 303.7 Ω
(Allow ecf from (b)(i))
OR
𝐼𝐼=
100 Ω= 1.64 × 10−2 A
1.64 𝑉𝑉
2.18 × 10−2 𝐴𝐴− 1.64 × 10−2 A = 5.4 × 10−3 𝐴𝐴
1.64 𝑉𝑉
𝑅𝑅=
5.4 × 10−3 𝐴𝐴 = 303.7 Ω
𝑃𝑃= 2.70 × 10−2 W
16(b)(iii)[2]
(Allow ecf from (b)(i) or (b)(ii) for I)
𝑃𝑃=
(1.64 V)2
Example of calculation
𝑃𝑃 = 2.70 × 10−2 W
100 Ω
16(c)[2]
The resistance of the parallel combination would increase
So the ratio / share of parallel combination resistance to other
resistance increases and so does the voltmeter reading, so student is
(Total for Question 16 = 9 marks)
Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.

