Physics · Oct / Nov 2024 · Paper 21 · Question 19
YPH11
As printed in the paper
The question as text
19 A photomultiplier is a device that can detect very low intensity light. In a photomultiplier, a metal plate called a photocathode is connected to the negative terminal of a power supply. Electromagnetic radiation incident on the photocathode can cause the photoelectric effect.
Read automatically from the paper; the printed page above is exact.
Show the answer and mark scheme
19(a)[2]
Or A photon (incident on a surface) collides with an atom / electron
An electron gains energy and is emitted (from the surface)
(To cause the photoelectric effect) the energy (of a photon) must be greater
19(b)[2]
than the work function (of the photocathode)
Or
(to cause the photoelectric effect) the frequency (of a photon) must be greater
than the threshold frequency (of the photocathode)
Photon energy is proportional to frequency, so photons below a certain
frequency / energy cannot cause the photoelectric effect
19(c)[4]
Use of 1 eV = 1.6 × 10−19 J
Use of E = hf
Use of v = fλ
Comparison of 840 nm with 700 nm and conclusion all wavelengths of visible
light can be detected
Or Comparison of 2.85 × 1019 J with 2.37 × 10−19 J and conclusion all
wavelengths of visible light can be detected
Or Comparison of 1.78 eV with 1.48 eV and conclusion all wavelengths of
visible light can be detected
Or Comparison of 3.57 x 1014 Hz with 4.29 x 1014 Hz
Example calculation
E = 1.48 eV × 1.6 × 10−19 J eV−1 = 2.37 × 10−19 J
2.37 × 10−19 J
fthreshold =
6.63 × 10−34 Js = 3.57 × 1014 Hz
3 × 108 m s−1
λthreshold =
3.57 × 1014 Hz = 840 × 10−9 m
700 nm < 840 nm so all wavelengths of visible light can be detected
19(d)[3]
Use of Ek = ½ mv2
Use of 𝑉 =
𝑊
𝑄
Final kinetic energy = 1.81 × 10−17 (J)
Example calculation
Initial Ek = 0.5 × 9.11 × 10−31 kg × (1.35 × 106 m s−1)2 = 8.30 × 10−19 J
W = 108 V × 1.6 × 10−19 C = 1.73 × 10−17 J
Final kinetic energy (= 1.73 × 10−17 J + 8.30 × 10−19 J) = 1.81 × 10−17 J
19(e)[4]
EITHER
Use of V = IR to calculate current in circuit
Calculates total p.d across resistors A to D
Use of sum of e.m.f. = sum of p.d
Internal resistance = 1.20 MΩ
OR
Calculates total p.d. across resistors A to D
Uses ratio of resistance = ratio of p.d.
Correct values substituted into ratio equation
Internal resistance = 1.20 MΩ
Example calculation
108 V
85 × 103 Ω = 1.27 × 10−3 A
𝐼 =
𝑉= 1960 −4 × 108 = 1530 V
1530 V
1.27 × 10−3A = 1.20 × 106 Ω
𝑟=
Pearson Education Limited. Registered company number 872828
with its registered office at 80 Strand, London, WC2R 0RL, United Kingdom
Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.

