Note AcademyNote Academy

Physics · May / June 2024 · Paper 21 · Question 14

YPH11

As printed in the paper

The question as text

14 An electrical heating system consists of heating panels. Each panel is made from a thin sheet of conducting material attached to two copper electrodes. The electrodes are connected to a power supply, as shown. conducting material copper electrodes

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 14(a)(i)[1]

    length

    𝑅𝐴

    Or 𝜌=

    𝑙 with terms defined

    Measure the L using a metre rule

  • 14(a)(ii)[4]

    Measure the thickness of the material using a micrometer

    Or Measure the thickness of the material using vernier callipers

    Use an ammeter and voltmeter to determine the resistance using 𝑅=

    𝑉

    𝐼

    Or Use an ohmmeter to measure the resistance of the sample

    Use 𝜌=

    𝑅𝐴

    𝑙 to determine the resistivity

    Or valid description of a graph and gradient calculation to determine the

    resistivity

    Copper has a high concentration of charge carriers

  • 14(b)[2]

    I = nAvq so (for a given current) drift velocity is small

    The same potential difference is applied across each additional panel

  • 14(c)[2]

    So each panel dissipates the same power, and power output of the system

    increases

    OR

    As more panels are connected, the resistance (of the system) decreases (and

    potential difference remains the same)

    𝑉2

    And 𝑃=

    𝑅 so power output of the system increases

    OR

    As more panels are connected, the current in the power supply increases (and

    potential difference across each panel is the same)

    And P = VI so power output of the system increases

    OR

    As more panels are connected, the current in the power supply increases and

    the resistance of the system decreases by the same factor

    And P = I2R so power output of the system increases

  • 14(d)[5]

    Use of A = length × thickness

    Use of 𝜌=

    𝑅𝐴

    𝑙

    𝑅1 panel

    Use of 𝑅total =

    5

    𝑉2

    Use of 𝑃=

    𝑅

    680 W is greater than 350 W so the system is not safe

    OR

    Use of A = length × thickness

    𝑅𝐴

    Use of 𝜌=

    𝑙

    𝑉2

    Use of 𝑃=

    𝑅

    Use of 𝑃total = 5 × 𝑃1 panel

    680 W is greater than 350 W so the system is not safe

    Example of calculation

    𝐴= 1.60 m × 0.48 × 10−3 m = 7.68 × 10−4 m2

    𝑅= 6.4 × 10−3 Ω m × 0.51 m

    = 4.25 Ω

    7.68 × 10−4 m2

    𝑅total = 4.25 Ω

    = 0.85 Ω

    5

    𝑃= (24 V)2

    0.85 Ω = 678 W

    Uses at least 3 waves to determine T

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.