Physics · Oct / Nov 2023 · Paper 61 · Question 4
YPH11
As printed in the paper
The question as text
4 A student made measurements on a rubber band as shown. rubber band Not to scale t x The rubber band has a rectangular cross‑section.
Read automatically from the paper; the printed page above is exact.
Show the answer and mark scheme
4(a)(i)[2]
EITHER
Repeat at different places and calculate a mean
To reduce (the effect of) random error
MP2 dependent on MP1
[Allow MP2 if MP1 partially correct]
OR
Use the ratchet to avoid squashing the rubber
To reduce (the effect of) random error
MP2 dependent on MP1
[Allow MP2 if MP1 partially correct]
OR
Check and correct for zero error
To eliminate systematic error
[Accept reduce for eliminate]
MP2 dependent on MP1
[Allow MP2 if MP1 partially correct]
4(a)(ii)[1]
Mean t = 1.04 (mm)
3 SF only
Example of calculation
(ଵ.ଶ ା ଵ. ା ଵ.ହ ା ଵ.ଵ)୫୫
Mean t =
= 1.035 = 1.04 (mm)
ସ
4(a)(iii)[2]
Calculation using half range shown
Or
Calculation of furthest from the mean shown
Percentage uncertainty in t = 3 %
e.c.f. (a)(ii)
Accept 2 SF
Example of calculation
(ଵ. ି ଵ.ଵ)୫୫
Half range =
= 0.025 = 0.03 (mm)
ଶ
%U =
.ଷ୫୫
ଵ.ସ୫୫× 100 = 2.9% = 3%
Note: use of 0.025 in calculation gives 2.4% or 2%
4(a)(iv)[2]
The measurement is larger but the uncertainty is the same
Or
The measurement is larger but the resolution (of the micrometer) is the same
So the percentage uncertainty is reduced (by a factor of 4)
MP2 dependent on MP1
4(a)(v)[2]
The length x of the rubber band does not take into account the fold (at the
ends).
The (length x of the) rubber band could be measured when it is not taut
Or
The width w could be measured when the rubber band is compressed
4(b)(i)[2]
EITHER
∆
Uses 2 × percentage uncertainty in D
[Accept 2 ×
]
Uncertainty in D = 0.069 (cm2)
2 SF only
Example of calculation
%U in D 2 = 2 × .ଵ
ଷ.ସହ × 100 = 0.58%
U in D 2 = 3.452 × .ହ଼
ଵ = 0.069 (cm2)
OR
Calculation of half range of D 2 shown
Uncertainty in D = 0.069 (cm2)
2 SF only
Example of calculation
ଷ.ସమ ି ଷ.ସସమ
U in D 2 =
= 0.069 (cm2)
ଶ
4(b)(ii)[2]
EITHER
Addition of uncertainties shown
U in A = 0.052 (cm2)
2 SF only
e.c.f. (b)(i)
Example of calculation
U in A = (0.07 + 0.06 + 0.07) ×
ଵଶ = 0.052 (cm2)
OR
Calculation of maximum and minimum A shown
U in A = 0.053 (cm2)
2 SF only
Example of calculation
Maximum A = (11.97 + 9.42 + 10.63) ×
ଵଶ = 8.383 cm2
Minimum A = (11.83 + 9.30 + 10.49) ×
ଵଶ = 8.278 cm2
.ଷ଼ଷ ି ଼.ଶ଼
U in A =
= 0.053 (cm2)
ଶ
4(c)[3]
Calculation of a relevant limit using percentage uncertainty shown
Or
Calculation of a relevant uncertainty using percentage uncertainty shown
Upper limit for rubber band = 1.20 (g cm−3) and
Lower limit for rubber bung = 1.50 (g cm−3)
They are not made from the same type of rubber as the upper limit of the
rubber band does not overlap the lower limit for the rubber bung
MP3 dependent MP2
Example of calculation
ସ.ଷ
Upper limit for rubber band = 1.15 × (1 +
ଵ) = 1.20 (g cm−3)
Lower limit for rubber bung = 1.52 × (1 − ଵ.ଶ
ଵ) = 1.50 (g cm−3)
Pearson Education Limited. Registered company number 872828
with its registered office at 80 Strand, London, WC2R 0RL, United Kingdom
Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.

