Note AcademyNote Academy

Physics · Oct / Nov 2023 · Paper 41 · Question 18

YPH11

As printed in the paper

The question as text

18 A student used the circuit shown to determine the capacitance of a capacitor. X Y V 150 kΩ The student connected the switch to X to charge the capacitor. She then connected the switch to Y so that the capacitor discharged through the 150 kΩ resistor. The student started a stopwatch when she connected the switch to Y and recorded the voltmeter reading V every 20 s as the capacitor discharged. The graph shows how V varied with time t. 15 10 V / V 5 0 0 20 40 60 80 100 120 140 160 180 t / s

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 18(a)[4]

    Two corresponding pairs of values of V and t read from graph

    Use of 𝑉= 𝑉0𝑒−𝑡

    𝑡

    𝑅𝐶 Or Use of ln V = ln V0 −

    𝐶𝑅

    C= 497 (µF) (Range 463 µF to 520 µF)

    Comparison of calculated value to tolerance calculated using 10%

    and conclusion as to whether it is in tolerance

    Or use of difference between calculated and labelled value to

    calculate percentage difference and conclusion as to whether it is in

    tolerance

    OR

    Use of V = V0 /e (4.4 V) to find time constant (74 s)

    Or intercept with t axis using initial tangent to find time constant

    Use of time constant = RC

    C= 493 (µF) (Range 463 µF to 520 µF)

    Comparison of calculated value to tolerance calculated using 10%

    and conclusion as to whether it is in tolerance

    Or use of difference between calculated and labelled value to

    calculate percentage difference and conclusion as to whether it is in

    tolerance

    Example of calculation

    4.1 V

    80 s

    12 V = e−

    150 × 103 Ω × 𝐶

    80 s

    𝐶= −

    = 4.97 × 10−4 F

    150 × 103 Ω × ln (4.1 V

    12 V)

    Largest C = 1.1 × 470 µF = 517 µF

    The capacitance is 497 µF which is less than the maximum value of

    517 µF, so value is within tolerance

  • 18(b)[3]

    𝑄2

    1

    Use of 𝑊=

    2 .

    𝐶

    1

    Use of W =

    2 𝐶𝑉2

    Calculates ratio of energies stored and makes comparison to 1000 and

    suitable conclusion

    Or

    Applies factor of 1000 to one calculated energy and makes

    comparison to the other energy and suitable conclusion

    Example of calculation

    2 . (56 C)2

    𝑊= 1

    = 33.4 J

    47 F

    1

    2 × 470 × 10−6 × (12 V)2 = 0.0338 J

    W =

    33.4 J

    0.0338 J = 987

    Ratio =

    Ratio of energies stored is 990 which is close to 1000, so claim is

    accurate

    Questio

    n

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.