Physics · Oct / Nov 2023 · Paper 31 · Question 4
YPH11
As printed in the paper
The question as text
4 A student investigated the photoelectric effect using the apparatus shown. colour filter digital voltmeter photocell potentiometer connection to ammeter He used a source of white light and colour filters to shine different wavelengths λ of light onto the photocell. Photoelectrons were emitted with a range of kinetic energies, creating a small current in the photocell. Using the potentiometer, the student varied the potential difference across the photocell. As the potential difference across the photocell increased, the current in the photocell decreased. He measured the potential difference Vs when the current in the photocell was zero. He calculated the maximum kinetic energy Emax of the photoelectrons for each wavelength of light.
Read automatically from the paper; the printed page above is exact.
Show the answer and mark scheme
4(a)(i)[6]
1/λ values correct and rounded to 3 s.f.Axes labelled with quantities and unitsSensible scalesPlottingLine of best fitVs / V
Emax / 10–20 J
λ / nm
1/λ / 106 m–1
1/λ / nm–1
0.00161
0.35
5.6
620
1.61
0.00173
0.43
6.9
577
1.73
0.00183
0.51
8.2
546
1.83
0.00213
0.75
12.0
470
2.13
0.00229
0.87
13.9
436
2.29
15.0
14.0
y = 12.389x 14.463
13.0
12.0
11.0
Emax / × 10–20 J
10.0
9.0
8.0
7.0
6.0
5.0
1.60
1.70
1.80
1.90
2.00
2.10
2.20
2.30
2.40
1/λ / × 106 m–1
4(a)(ii)[2]
1
Rearranges equation to 𝐸max = ℎ𝑐λ−
Compares this to y = mx + c and identifies m = hcMP2 dependent on MP1
4(a)(iii)[4]
Calculates gradient using large triangleUse of gradient = hch value between 4.0 × 10–34 J s and 4.3 × 10–34 J s... and h value rounded to 2 or 3 sfExample of calculation
Gradient = (12.8 – 6.6) × 10–20 J / (2.2 – 1.7) × 106 m = 1.24 × 10–25 J m
h = 1.24 × 10–25 J m / 3.00 × 108 m s–1 = 4.13 × 10–34 J s
4(a)(iv)[2]
Use ofpercentage difference = ((6.63 × 10–34 J s – their h) / 6.63 × 10–34 J s) × 100%
Percentage difference between 35% and 40%Allow ecf for h from 4(a)(iii) for both marks
MP2 dependent on MP1
For MP1, the denominator must be the published value (6.63 × 10–34 J s)
Example of calculation
Percentage difference = ((6.63 × 10–34 J s – 4.13 × 10–34 J s) / 6.63 × 10–34 J s) × 100%
Percentage difference = 38%
4(b)[4]
Random error:
EITHER
Difficult to judge exactly when current becomes 0 (so exact stopping p.d. isdifficult to identify)
Use a more sensitive ammeter (e.g. picoammeter)OR
Background light could affect wavelength/colourBlock background lightOr put the colour filter directly above the photocell
Systematic error:
EITHER
Colour filters do not give monochromatic lightOr colour filters could give a range of wavelengths/colours/frequencies
Or colour filters might be damaged and let through other
wavelengths/colours/frequencies
Use a monochromatic light sourceOr use a light source with a narrower wavelength/frequency band
Or use a light source with a single colour (e.g. LEDs / lasers)
OR
Zero error of the ammeter/voltmeterCheck ammeter reading is zero while no light is shiningOr check voltmeter reading is zero while apparatus is switched off
Or check ammeter/voltmeter reading is zero before connecting
Pearson Education Limited. Registered company number 872828
with its registered office at 80 Strand, London, WC2R 0RL, United Kingdom
Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.

