Note AcademyNote Academy

Physics · Oct / Nov 2023 · Paper 21 · Question 14

YPH11

As printed in the paper

The question as text

14 A temperature-sensing circuit consists of a fixed resistor and a thermistor, as shown. 15 Ω 6.0 V To heater switch The circuit supplies a potential difference (p.d.) to operate the heater switch. The heater switches on when the p.d. across the thermistor is greater than 0.7 V. The resistance of the thermistor varies with temperature as shown on the graph. 7 6 5 4 Resistance / Ω 3 2 1 0 –20 0 20 40 60 80 100 120 Temperature / °C

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 14(a)[6]

    10oC corresponds to 2.0 Ω

    Use of ratio of resistances

    Use of corresponding ratio of p.d.s

    To a p.d. of 0.7(06) V

    If temperature goes below this level then resistance of thermistor increases

    So p.d. to heater (switch) increases and so heater switch does perform as required

    Example of calculation

    𝑉

    2.0

    15 + 2.0

    6.0 =

    V = 0.706 V

    Or

    10oC corresponds to 2.0 Ω

    Use of I = V/R for whole circuit

    Use of V = IR for thermistor

    To a p.d. of 0.7(06) V

    If temperature goes below this level then resistance of thermistor increases

    So p.d. to heater (switch) increases and so heater switch does perform as required

    Example of calculation

    I = 6.0 V / (2 + 15) Ω

    = 0.353 A

    V = 0.353 A × 2.0 Ω

    = V

  • 14(b)[2]

    Increase in temperature results in more electrons released

    Or Increase in temperature results in more electrons moving into conduction

    band

    So resistance decreases (dependent on MP1)

    [allow converse argument]

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.