Physics · May / June 2023 · Paper 61 · Question 4
YPH11
As printed in the paper
The question as text
4 A student added small lead spheres to a test tube. The student placed the test tube in a small beaker of water. The test tube floated as shown. test tube lead spheres water The student gave the test tube a small vertical displacement. The test tube then oscillated vertically.
Read automatically from the paper; the printed page above is exact.
Show the answer and mark scheme
4(a)(i)[2]
Any TWO from:
Measure multiple oscillations and divide by the number of oscillations
Use a (fiducial) marker
Allow the oscillations to settle
Or
Start timing after a number of oscillations
4(a)(ii)[3]
Mean T = 0.68 (s)
Calculation using half range shown
Or
Calculation of furthest from mean shown
Uncertainty in T = 0.02 (s)
decimal places consistent with mean
Example of calculation
(3.43+3.36+3.28+3.49)s
Mean T =
13.56s
20 = 0.678 = 0.68 (s)
=
5×4
Uncertainty =
3.49s−3.28s
0.21
10 = 0.021 = 0.02 (s)
=
5×2
Vernier calipers will have resolution of 0.1 mm
4(b)[2]
Or
Vernier calipers will have an uncertainty of 0.05 mm
So the percentage uncertainty is 0.25 % which is small
[Do not accept precision or accuracy for resolution]
Example of calculation
0.05mm
%U in Vernier calipers =
20mm × 100 = 0.25 %
4(c)(i)[2]
Use of T = √
16π𝑚
𝐷2𝜌𝑔
= 1190 (kg m3)
Example of calculation
16π × 48.95×10−3 kg
=
16π𝑚
2.07×10−3 m3= 1190 (kg m3)
2.46 kg
𝐷2𝑇2𝑔=
(2.38×10−2m)2 × (0.61s)2 ×9.81ms−2 =
4(c)(ii)[3]
EITHER
Uses 2 × %U in D
[Allow 2 × ∆𝑑
𝑑 ]
Uses 2 × %U in T
[Allow 2 × ∆𝑇
𝑇 ]
%U in = 4.1 (%)
Accept 3 sig figs
Example of calculation
0.01cm
%U in D 2 = 2 ×
2.38cm × 100 = 0.84 %
0.01s
%U in T 2 = 2 ×
0.61s × 100 = 3.28 %
%U in = 0.84 % + 3.28 % = 4.12 %
OR
Calculation of maximum or minimum
Calculation of U in using half range shown
%U in = 4.1 (%)
Accept 3 sig figs
Example of calculation
16π𝑚
16π × 48.95×10−3 kg
2.46 kg
Maximum =
1.98×10−3 m3
𝐷2𝑇2𝑔=
(2.37×10−2m)2 × (0.60s)2 × 9.81ms−2 =
= 1242 (kg m3)
16π × 48.95×10−3 kg
Minimum =
16π𝑚
2.15×10−3 m3
2.46 kg
𝐷2𝑇2𝑔=
(2.39×10−2m)2 × (0.62s)2 × 9.81ms−2 =
= 1144 (kg m3)
(1242−1144)kgm−3
U in =
= 49 (kg m3)
2
49kgm−3
%U =
1190kgm−3 × 100 = 4.1 (%)
4(c)(iii)[2]
EITHER
Correct value of relevant limit of calculated density using %U
(e.c.f. (c)(i), (c)(ii))
Conclusion based on comparison of limit to density of glycerol
MP2 dependent MP1
Example of calculation
Upper limit of = 1190 × (1 + 0.041) = 1239 (kg m−3)
As the upper limit is lower than 1260 kg m−3 then the liquid may not be
glycerol.
[‘Show that’ value gives upper limit = 1200 × (1 + 0.04) = 1248 (kg m−3)]
OR
Correct calculation of %D shown
(e.c.f. (c)(i), (c)(ii))
Conclusion based on comparison of %D and %U
MP2 dependent MP1
Example of calculation
(1260−1190)kgm−3
%D =
× 100 = 5.6 %
1260kgm−3
As % D for greater than the %U then the liquid may not be glycerol.
(1260−1200)kgm−3
[‘Show that’ value gives %D =
× 100 = 4.8 %]
1260kgm−3
OR
Correct value of relevant limit using uncertainties in D and T
Conclusion based on comparison of limit to density of glycerol
MP2 dependent MP1
Example of calculation
16π𝑚
16π × 48.95×10−3 kg
2.46 kg
Upper limit of =
1.98×10−3 m3
𝐷2𝑇2𝑔=
(2.37×10−2m)2 × (0.60s)2 × 9.81ms−2 =
= 1242 (kg m3)
As the upper limit is lower than 1260 kg m−3 then the liquid may not be
glycerol.
Pearson Education Limited. Registered company number 872828
with its registered office at 80 Strand, London, WC2R 0RL, United Kingdom
Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.

