Note AcademyNote Academy

Physics · May / June 2023 · Paper 41 · Question 16

YPH11

As printed in the paper

The question as text

16 A search coil is used to investigate magnetic fields. The search coil consists of a coil of thin copper wire connected to two output terminals, as shown. coil output terminals A student placed the coil in a magnetic field with the axis parallel to the direction of the field, as shown. axis of coil direction of coil magnetic field The coil was rotated through 90° so the axis was perpendicular to the direction of the field, as shown. direction of magnetic field As the coil was rotated, a potential difference (p.d.) was detected across the terminals.

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 16(a)[2]

    (Wires) cut lines of magnetic flux

    Or flux linkage (with coil) changing

    Induces emf

  • 16(b)[3]

    Use of A = 𝜋(d/2)2

    Applies knowledge of flux = flux density × area

    Flux = 8.8 × 10–5 (Wb) (at least 2 s.f)

    Example of calculation

    A = 𝜋 × (0.025 m / 2)2

    = 4.9 × 10–4 m2

    𝜑 = 0.18 T × 4.9 × 10–4 m2

    = 8.84 × 10–5 Wb

  • 16(c)[4]

    Determine maximum gradient of graph

    Use of flux linkage = N 𝜑

    Use of 𝜀 = dN𝜑 / dt

    V = 2.3 V (range rounds – 2.2 V to 2.6 V)

    Example of calculation

    max gradient = 4.62 × 10–4 Wb s–1

    max V = 5000 × 4.62 × 10–4 Wb s–1 = 2.3 V

  • 16(d)[4]

    By Lenz’s law, current/e.m.f./field/force produced is so as to oppose the

    cause of the current/e.m.f.

    Force on wire due to interaction of induced current and field

    Force to left, so, by (Fleming) LHR…

    … current into page and student is correct (dependent on MP3)

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.