Note AcademyNote Academy

Physics · May / June 2023 · Paper 31 · Question 3

YPH11

As printed in the paper

The question as text

3 A student investigated the diffraction of electrons using an electron beam tube as shown. hot filament anode curved fluorescent screen – + cathode V thin graphite foil The potential difference, V, accelerates electrons from the hot filament towards the thin graphite foil. The electrons diffract as they pass through the foil, producing a ring pattern on the curved fluorescent screen as shown below. (Source: © ANDREW LAMBERT PHOTOGRAPHY/SCIENCE PHOTO LIBRARY)

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 3(a)(i)[2]

    Max TWO from

    The vernier calipers have a smaller resolution

    Or the vernier calipers have a lower uncertainty

    The vernier calipers can measure without parallax error

    Tips of vernier calipers are easier to align with the rings (as surface is curved)

  • 3(a)(ii)[2]

    Repeat the measurement and calculate a mean value

    Measure the diameter in different orientations

    If no other marks awarded, allow 1 mark for “check for zero error before measuring”

  • 3(b)(i)[2]

    Calculation of mean value using all three values

    Mean a = 1.22 × −18 (m2 V) rounded to 3 s.f.

    Example of calculation

    Mean value of a = (1.23 + 1.11 + 1.32) × 10−18/ 3 = 1.22 × 10−18 m2 V

  • 3(b)(ii)[2]

    Use of half their range for uncertainty

    [Accept use of furthest value from the mean]

    Percentage uncertainty = 9 (%)

    e.c.f. 3(b)(i)

    Example of calculation

    Uncertainty = half range = (1.32 − 1.11) × 10−18 / 2 = 0.105 × 10−18 m2 V

    Percentage uncertainty = (0.105 × 10−18/ 1.22 × 10−18) × 100 = 8.6 %

  • 3(b)(iii)[2]

    Max TWO from

    More pairs of values were used

    Adding a line of best fit acts as an averaging method

    Adding a line of best fit can identify anomalous values

    The gradient value will ignore any systematic error

    Or the line/intercept will identify any systematic error

    [accept named examples of systematic error, e.g., zero error]

  • 3(c)(i)[2]

    ℎ2

    Use of a =

    2𝑒𝑚𝑒

    h = 6.52 × 10 −34 (J s)

    Example of calculation

    h = √(2 × 1.6 × 10−19 × 9.11 × 10−31 × 1.46 × 10−18) = 6.52 × 10−34 (J s)

  • 3(c)(ii)[2]

    EITHER

    Calculation of upper limit of h

    Conclusion based on comparison to 6.63 × 10−34 J s

    e.c.f. 3(c)(ii)

    For 1 mark only – accept the calculation of 6% limit of 6.63 × 10−34 J s

    OR

    Calculation of percentage difference from 6.63 × 10−34 J s

    e.c.f. 3(c)(i)

    Conclusion based on comparison to 6 %

    Examples of calculation

    Upper limit of h = 6.52 × 10−34 × = 6.92 × 10−34 J s

    As this is above value of 6.63 × 10−34 J s then the calculated value is accurate

    Percentage difference = ((6.63 − 6.52) × 10−34 / 6.63 × 10−34 ) × 100 = 1.7 %

    As this is less than 6 % then calculated value is accurate

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.