Note AcademyNote Academy

Physics · May / June 2023 · Paper 11 · Question 19

YPH11

As printed in the paper

The question as text

19 The diagram shows a crane lifting a load. There is a large mass called a counterweight attached to the crane, on the opposite side of the tower to the load. beam counterweight load tower

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 19(a)[4]

    Use of ΔW = F Δx or ΔEgrav = mgΔh

    Use of P = W / t

    Use of efficiency = useful power output / total power input

    Or

    Use of efficiency = useful energy output / total energy input

    Total power input = 2.0 × 104 W

    Example of calculation

    ΔW = 4.4 × 104 × 15 m = 6.6 × 105 J

    Output power = 6.6 × 105 J ÷ 70 s = 9.4 × 103 W

    9.4×103 W

    Efficiency =

    Total power input = 0.47

    9.4 × 103 𝑊

    Total power input =

    = 2.0 × 104 W

    0.47

  • 19(b)(i)[4]

    Total clockwise must balance total anticlockwise moment (about tower)

    Or

    Net/resultant/total moment (about tower) must be zero.

    Total anticlockwise moment is due to counterweight

    and

    Total clockwise moment is due to sum of moment from beam and load

    Increasing the distance of the load increases the (cw) moment (distance of

    CoG remains the same)

    Distance of counterweight needs to be increased [dependent on MP3]

  • 19(b)(ii)[5]

    Use of ΔW = F Δx or ΔEgrav = mgΔh

    Use of P = W / t

    Use of efficiency = useful power output / total power input

    Or

    Use of efficiency = useful energy output / total energy input

    Total power input = 2.0 × 104 W

    Example of calculation

    ΔW = 4.4 × 104 × 15 m = 6.6 × 105 J

    Output power = 6.6 × 105 J ÷ 70 s = 9.4 × 103 W

    9.4×103 W

    Efficiency =

    Total power input = 0.47

    9.4 × 103 𝑊

    Total power input =

    = 2.0 × 104 W

    0.47

    Total clockwise must balance total anticlockwise moment (about tower)

    Or

    Net/resultant/total moment (about tower) must be zero.

    Total anticlockwise moment is due to counterweight

    and

    Total clockwise moment is due to sum of moment from beam and load

    Increasing the distance of the load increases the (cw) moment (distance of

    CoG remains the same)

    Distance of counterweight needs to be increased [dependent on MP3]

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.