Note AcademyNote Academy

Physics · Oct / Nov 2022 · Paper 61 · Question 4

YPH11

As printed in the paper

The question as text

4 A student had two pieces of constantan wire, X and Y. Wires X and Y had different diameters.

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 4(a)(i)[2]

    Either

    Repeat at different orientations (along the wire) and calculate a mean

    To reduce the effect of random errors

    Or

    Check and correct for zero error (on micrometer screw gauge)

    To eliminate systematic error

    MP2 dependent on MP1

    [Allow MP2 if MP1 partially correct]

  • 4(a)(ii)[3]

    Mean d = 0.31 (mm)

    Calculation using half range shown

    Or

    Calculation of furthest from mean shown

    Uncertainty in d = 0.02 (mm)

    Decimal places consistent with the

    calculated mean

    MP3 dependent on MP2

    Example of calculation

    Mean d = (0.31 + 0.32 + 0.31 + 0.33 + 0.30) / 5 = 1.57 / 5

    = 0.314 = 0.31 (mm)

    Uncertainty = (0.33 − 0.30) / 2 = 0.03 / 2 = 0.015 = 0.02 (mm)

  • 4(b)(i)[3]

    Use of A = πd 2/4 and R = V/I

    Use of R = L/A

    = 4.6 × 10−7 (Ω m)

    Example of calculation

    A = π × (0.22×10−3 m)2 / 4 = 3.80 × 10−8 m2

    R = V / I = 4.990 V / 0.4570 A = 10.9 Ω

    = RA / L = 10.9 Ω × 3.80 × 10−8 m2 / 0.894 m = 4.6 × 10−7 (Ω m)

    Addition of %U for all variables shown

    %U = 9.4 (%)

    [Accept answers that round to 9%]

    Example of calculation

    %U in d = ( ) × =

    U in V = (0.005 / 4.990) × 100 = 0.10 %

    U in L = (0.1 / 89.4) × 100 = 0.11 %

    U in I = (0.0005 / 0.4570) × 100 = 0.11 %

    %U in = (2 × ) + + + = =

    r

    Use of uncertainties to calculate maximum

    Or

    Use of uncertainties to calculate minimum

    Calculation of uncertainty in using maximum and minimum

    %U = 9.3 (%)

    [Accept answers that round to 9%]

    Example of calculation

    Amax = π × (0.23×10−3 m)2 / 4 = 4.15 × 10−8 m2

    Amin = π × (0.21×10−3 m)2 / 4 = 3.16 × 10−8 m2

    Rmax = Vmax / Imin = 4.995 V / 0.4565 A = 10.9 Ω

    Rmin = Vmin / Imax = 4.985 V / 0.4575 A = 10.9 Ω

    max = Rmax Amax / Lmin = 10.9 Ω × 4.15 × 10−8 m2 / 0.893 m

    = 5.07 × 10−7 (Ω m)

    min = Rmin Amin / Lmax = 10.9 Ω × 3.46 × 10−8 m2 / 0.895 m

    = 4.21 × 10−7 (Ω m)

    U in = (5.07 × 10−7 − 4.21 × 10−7) / 2 = 0.43 × 10−7 (Ω m)

    %U in = 0.43 × 10−7 / 4.6 × 10−7 × 100 = 9.34 = 9.3 %

  • 4(b)(ii)[3]

    Either

    Repeat at different orientations (along the wire) and calculate a mean

    To reduce the effect of random errors

    Or

    Check and correct for zero error (on micrometer screw gauge)

    To eliminate systematic error

    MP2 dependent on MP1

    [Allow MP2 if MP1 partially correct]

    Mean d = 0.31 (mm)

    Calculation using half range shown

    Or

    Calculation of furthest from mean shown

    Uncertainty in d = 0.02 (mm)

    Decimal places consistent with the

    calculated mean

    MP3 dependent on MP2

    Example of calculation

    Mean d = (0.31 + 0.32 + 0.31 + 0.33 + 0.30) / 5 = 1.57 / 5

    = 0.314 = 0.31 (mm)

    Uncertainty = (0.33 − 0.30) / 2 = 0.03 / 2 = 0.015 = 0.02 (mm)

    Use of A = πd 2/4 and R = V/I

    Use of R = L/A

    = 4.6 × 10−7 (Ω m)

    Example of calculation

    A = π × (0.22×10−3 m)2 / 4 = 3.80 × 10−8 m2

    R = V / I = 4.990 V / 0.4570 A = 10.9 Ω

    = RA / L = 10.9 Ω × 3.80 × 10−8 m2 / 0.894 m = 4.6 × 10−7 (Ω m)

    Addition of %U for all variables shown

    %U = 9.4 (%)

    [Accept answers that round to 9%]

    Example of calculation

    %U in d = ( ) × =

    U in V = (0.005 / 4.990) × 100 = 0.10 %

    U in L = (0.1 / 89.4) × 100 = 0.11 %

    U in I = (0.0005 / 0.4570) × 100 = 0.11 %

    %U in = (2 × ) + + + = =

    r

    Use of uncertainties to calculate maximum

    Or

    Use of uncertainties to calculate minimum

    Calculation of uncertainty in using maximum and minimum

    %U = 9.3 (%)

    [Accept answers that round to 9%]

    Example of calculation

    Amax = π × (0.23×10−3 m)2 / 4 = 4.15 × 10−8 m2

    Amin = π × (0.21×10−3 m)2 / 4 = 3.16 × 10−8 m2

    Rmax = Vmax / Imin = 4.995 V / 0.4565 A = 10.9 Ω

    Rmin = Vmin / Imax = 4.985 V / 0.4575 A = 10.9 Ω

    max = Rmax Amax / Lmin = 10.9 Ω × 4.15 × 10−8 m2 / 0.893 m

    = 5.07 × 10−7 (Ω m)

    min = Rmin Amin / Lmax = 10.9 Ω × 3.46 × 10−8 m2 / 0.895 m

    = 4.21 × 10−7 (Ω m)

    U in = (5.07 × 10−7 − 4.21 × 10−7) / 2 = 0.43 × 10−7 (Ω m)

    %U in = 0.43 × 10−7 / 4.6 × 10−7 × 100 = 9.34 = 9.3 %

    Use of an uncertainty of 0.05 Ω in value of R1 or R2

    Use of U = 2× (U in R2 + U in R1) shown

    Or

    Use of maximum and minimum values shown

    %U = 1.8 (%)

    Example of calculation

    U = 2 × (0.05 + 0.05) = 2× 0.1 = 0.2

    %U = (0.2 / 11.4) × 100 = 1.8 %

    Lower limit of RL = 11.2 (Ω)

    Conclusion based on comparison of limits

    [MP3 dependent MP1 or MP2]

    Example of calculation

    Upper limit = 4.6 × 10−7 × (1 + 0.09) = 5.0 × 10−7 Ω m

    Lower limit RL = 11.4 × (1−0.02) = 11.2 Ω

    Therefore both values fall in the range (confirming metal is constantan).

    Or

    %D for = 6.1%

    %D for RL = 1.8%

    Conclusion based on comparison of %D and %U

    [MP3 dependent MP1 or MP2]

    Example of calculation

    %D for = (4.9 − 4.6) / 4.9 × 100 = 6.1 %

    %D for RL = (11.4 − 11.2) / 11.2 × 100 = 1.8 %

    Therefore both %D are less than %U (confirming metal is constantan).

    Pearson Education Limited. Registered company number 872828

    with its registered office at 80 Strand, London, WC2R 0RL, United Kingdom

  • 4(c)[3]

    Use of an uncertainty of 0.05 Ω in value of R1 or R2

    Use of U = 2× (U in R2 + U in R1) shown

    Or

    Use of maximum and minimum values shown

    %U = 1.8 (%)

    Example of calculation

    U = 2 × (0.05 + 0.05) = 2× 0.1 = 0.2

    %U = (0.2 / 11.4) × 100 = 1.8 %

    Lower limit of RL = 11.2 (Ω)

    Conclusion based on comparison of limits

    [MP3 dependent MP1 or MP2]

    Example of calculation

    Upper limit = 4.6 × 10−7 × (1 + 0.09) = 5.0 × 10−7 Ω m

    Lower limit RL = 11.4 × (1−0.02) = 11.2 Ω

    Therefore both values fall in the range (confirming metal is constantan).

    Or

    %D for = 6.1%

    %D for RL = 1.8%

    Conclusion based on comparison of %D and %U

    [MP3 dependent MP1 or MP2]

    Example of calculation

    %D for = (4.9 − 4.6) / 4.9 × 100 = 6.1 %

    %D for RL = (11.4 − 11.2) / 11.2 × 100 = 1.8 %

    Therefore both %D are less than %U (confirming metal is constantan).

    Pearson Education Limited. Registered company number 872828

    with its registered office at 80 Strand, London, WC2R 0RL, United Kingdom

  • 4(d)[3]

    Either

    Repeat at different orientations (along the wire) and calculate a mean

    To reduce the effect of random errors

    Or

    Check and correct for zero error (on micrometer screw gauge)

    To eliminate systematic error

    MP2 dependent on MP1

    [Allow MP2 if MP1 partially correct]

    Mean d = 0.31 (mm)

    Calculation using half range shown

    Or

    Calculation of furthest from mean shown

    Uncertainty in d = 0.02 (mm)

    Decimal places consistent with the

    calculated mean

    MP3 dependent on MP2

    Example of calculation

    Mean d = (0.31 + 0.32 + 0.31 + 0.33 + 0.30) / 5 = 1.57 / 5

    = 0.314 = 0.31 (mm)

    Uncertainty = (0.33 − 0.30) / 2 = 0.03 / 2 = 0.015 = 0.02 (mm)

    Use of A = πd 2/4 and R = V/I

    Use of R = L/A

    = 4.6 × 10−7 (Ω m)

    Example of calculation

    A = π × (0.22×10−3 m)2 / 4 = 3.80 × 10−8 m2

    R = V / I = 4.990 V / 0.4570 A = 10.9 Ω

    = RA / L = 10.9 Ω × 3.80 × 10−8 m2 / 0.894 m = 4.6 × 10−7 (Ω m)

    Addition of %U for all variables shown

    %U = 9.4 (%)

    [Accept answers that round to 9%]

    Example of calculation

    %U in d = ( ) × =

    U in V = (0.005 / 4.990) × 100 = 0.10 %

    U in L = (0.1 / 89.4) × 100 = 0.11 %

    U in I = (0.0005 / 0.4570) × 100 = 0.11 %

    %U in = (2 × ) + + + = =

    r

    Use of uncertainties to calculate maximum

    Or

    Use of uncertainties to calculate minimum

    Calculation of uncertainty in using maximum and minimum

    %U = 9.3 (%)

    [Accept answers that round to 9%]

    Example of calculation

    Amax = π × (0.23×10−3 m)2 / 4 = 4.15 × 10−8 m2

    Amin = π × (0.21×10−3 m)2 / 4 = 3.16 × 10−8 m2

    Rmax = Vmax / Imin = 4.995 V / 0.4565 A = 10.9 Ω

    Rmin = Vmin / Imax = 4.985 V / 0.4575 A = 10.9 Ω

    max = Rmax Amax / Lmin = 10.9 Ω × 4.15 × 10−8 m2 / 0.893 m

    = 5.07 × 10−7 (Ω m)

    min = Rmin Amin / Lmax = 10.9 Ω × 3.46 × 10−8 m2 / 0.895 m

    = 4.21 × 10−7 (Ω m)

    U in = (5.07 × 10−7 − 4.21 × 10−7) / 2 = 0.43 × 10−7 (Ω m)

    %U in = 0.43 × 10−7 / 4.6 × 10−7 × 100 = 9.34 = 9.3 %

    Use of an uncertainty of 0.05 Ω in value of R1 or R2

    Use of U = 2× (U in R2 + U in R1) shown

    Or

    Use of maximum and minimum values shown

    %U = 1.8 (%)

    Example of calculation

    U = 2 × (0.05 + 0.05) = 2× 0.1 = 0.2

    %U = (0.2 / 11.4) × 100 = 1.8 %

    Lower limit of RL = 11.2 (Ω)

    Conclusion based on comparison of limits

    [MP3 dependent MP1 or MP2]

    Example of calculation

    Upper limit = 4.6 × 10−7 × (1 + 0.09) = 5.0 × 10−7 Ω m

    Lower limit RL = 11.4 × (1−0.02) = 11.2 Ω

    Therefore both values fall in the range (confirming metal is constantan).

    Or

    %D for = 6.1%

    %D for RL = 1.8%

    Conclusion based on comparison of %D and %U

    [MP3 dependent MP1 or MP2]

    Example of calculation

    %D for = (4.9 − 4.6) / 4.9 × 100 = 6.1 %

    %D for RL = (11.4 − 11.2) / 11.2 × 100 = 1.8 %

    Therefore both %D are less than %U (confirming metal is constantan).

    Pearson Education Limited. Registered company number 872828

    with its registered office at 80 Strand, London, WC2R 0RL, United Kingdom

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.