Physics · Oct / Nov 2022 · Paper 61 · Question 1
YPH11
As printed in the paper
The question as text
1 A student investigated the magnetic field produced by a current‑carrying coil, coil A. She made coil A by wrapping a wire around a plastic tube. Coil A was connected to an alternating current (a.c.) power supply. A second coil, coil B, was placed in the magnetic field and connected to an oscilloscope as shown. oscilloscope r coil A coil B wire plastic tube a.c. power supply
Read automatically from the paper; the printed page above is exact.
Show the answer and mark scheme
1(a)[2]
Any PAIR from:
There could be a short circuit (across the power supply)
Use insulated wire
Or
There is a risk of electrocution (from coil A)
[Accept electric shock]
Use a low p.d.
Or
There is a risk of the wire overheating (if current is too high)
Use a low p.d.
Or
Use a (limiting) resistor
1(b)[3]
Resolution of Vernier calipers is higher (than the metre ruler)
Or
Resolution of Vernier calipers is 0.1 mm and resolution of metre rule is 1 mm
Use of half resolution to calculate %U Or U in Vernier calipers and ruler
Valid comparison of %U Or U
MP3 dependent on MP1 or MP2
[Accept converse]
Example of calculation
%U for Vernier calipers = 0.005/2 × 100 = 0.25%
%U for metre rule = 0.05/2 × 100 = 2.5%
1(c)[3]
Measure the amplitude of the trace in divisions
Or
Measure the number of divisions between maximum and minimum and divide
by two
Multiply by 100 mV (per division)
Repeat (the amplitude measurement) and calculate a mean
1(d)[2]
Any TWO from
Inconsistent significant figures Or decimal places (for E)
Values of r not given to correct number of decimal places
Units of E are incorrect
No repeats are shown
Or
Not enough readings shown
Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.

