Physics · Oct / Nov 2022 · Paper 31 · Question 1
YPH11
As printed in the paper
The question as text
1 A student used light gates connected to a data logger to investigate the collision between two gliders on a level air track, as shown. first light gate second light gate card air track connected to an air blower glider A glider B Glider B was initially stationary. Glider A moved through the first light gate and then collided with glider B. The two gliders joined together, then moved through the second light gate.
Read automatically from the paper; the printed page above is exact.
Show the answer and mark scheme
1(a)(i)[2]
Mark 1(a)(i) and (ii) holistically to ensure approach used in 1(a)(i)
matches the approach used in 1(a)(ii)
Measures length of top and bottom edges, and calculates mean
(Accept inclusion of additional measurements taken horizontally)
Length of card = 0.065 m
Example of calculation
Length of top edge = 6.6 cm
Length of bottom edge = 6.4 cm
Mean length = (6.6 cm + 6.4 cm)/2 = 6.5 cm
1(a)(ii)[2]
EITHER
Use of half the range of values if multiple length values measured
Or use of max distance from the mean if multiple length values
measured
% uncertainty = 1.5% (accept 2%)
OR
Use of half ruler resolution if a single length value is measured/shown
in 1(a)(i)
% uncertainty = 0.77% (accept 0.8%)
Accept uncertainty = full the resolution for MP1, giving and answer of
1.5% for MP2 for this approach.
Allow e.c.f. from 1(a)(i) for both approaches.
Example of calculation
Half range = 0.1 cm
% uncertainty = (0.1 cm / 6.5 cm) × 100% = 1.5%
1(b)(i)[4]
Use of 𝑣= 𝑠𝑡
⁄
v = 0.512 (m s–1) to 3 s.f.
Use of 𝑝= 𝑚𝑣
p = 0.140 (kg m s–1) to 3 s.f.
(accept p recorded to same s.f. as v, if v recorded to 1 or 2 s.f.)
Example of calculation
⁄ = 0.105 m / 0.205 s = 0.512 m s–1
𝑣= 𝑠𝑡
𝑝= 𝑚𝑣 = 0.274 kg × 0.512 m s–1 = 0.140 kg m s–1
1(b)(ii)[2]
Calculates percentage difference between the total momentum
before and after
The (percentage) difference is small so momentum is conserved
Or a conclusion consistent with a comparison of student’s values
Example of calculation
Percentage difference = ((0.143 kg m s–1 – 0.140 kg m s–1)/ 0.143 kg m s–1)
× 100%
Percentage difference = 2.1%
1(c)[3]
Different force could be applied each time
Or the force could be applied for a different time
The time/velocity/momentum/acceleration for the moving glider is
likely to be the different for each repeat
Increasing uncertainty (in momentum)
MP3 is dependent on either of MP1 or MP2
1(d)[2]
Light gates and data logger eliminate (human) reaction time
Or using the stopwatch would include a (human) reaction time
Which would reduce the effect of random error (in the time for the
glider to travel)
Or reducing the uncertainty (in time for the glider to travel)
Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.

