Physics · Oct / Nov 2022 · Paper 21 · Question 15
YPH11
As printed in the paper
The question as text
15 The human ear can only hear two sounds as separate frequencies when the difference in frequency between the sounds is greater than 0.3%. Sounds with a difference in frequency less than 0.3% are heard as the same frequency.
Read automatically from the paper; the printed page above is exact.
Show the answer and mark scheme
15(a)(i)[8]
λ = 2L used
Use of v = √( 𝑇
𝜇 )
Decrease in tension = 2.5 N
Example of calculation
(fλ)2 = T/μ
λ = 2L = 2 × 0.187 = 0.374 m
for 882 Hz, (882 Hz × 0.374 m)2 = T / 5.08 × 10−3 kg m−1
T = 552.8 N
for 880 Hz, (880 Hz × 0.374 m)2 = T / 5.08 × 10−3 kg m−1
T = 550.3 N
decrease in T = 2.5 N
Use of n1 sin θ1 = n2 sin θ2
16ai
with sin θ2 as 1
critical angle = 75.1(°)
Or
calculates ratio n2:n1
Use of sin C = 1/n
critical angle = 75.1(°)
Example of calculation
n1 sin θ1 = n2 sin θ2
1.48 × sin C = 1.43 × sin 90°
C = 75.1°
16aii
Angle of incidence measured/stated in range 7981°
This is greater than the critical angle
Total internal reflection takes place
(MP1 can be awarded for seeing angle correctly marked on diagram)
(If no angle of incidence measured, score 0)
(MP3 dependent upon awarding MP2)
(MP2 and MP3 can be awarded if angle of incidence is measured to be
between 76° and 85°)
(e.c.f. from (i))
Use of n = c/v with n = 1.48
16bi
Use of speed = distance / time
Time = 3.4 × 10−4 s
(Allow MP2 if using speed of light in a vacuum)
Example of calculation
v = c/n = 3.00 × 108 ms−1 / 1.48 = 2.03 × 108 ms−1
time = distance / speed = 70,000 m / 2.03 × 108 ms−1 = 3.45 × 10−4 s
(Lower RI leads to) lower critical angle
16bii
More light (totally internally) reflected
Or less light refracted
Or more of the incident light will hit the boundary at an angle greater
than the critical angle
(MP2 dependent on awarding MP1)
Use of P = VI
17ai
P = 0.11 (W)
(MP1 Allow methods where R is calculated and then either P = I2R or
P = V2/R is used to calculate P)
Example of calculation
P = VI = 12.0 V × 9.2 × 10−3 A = 0.11 W
17aii
Use of E = Pt to calculate energy of LED
Use of v = fλ and E = hf to calculate photon energy
Divides total energy in one minute by energy of a photon
Number of photons in one minute = 2.1 × 1019
(candidates who do not convert minutes into seconds can score a
maximum of 2 marks – MP2 and MP3)
(“show that” value leads to 1.9 × 1019)
(allow full e.c.f. from (i))
Example of calculation
E = Pt = 0.11W × 60 s = 6.6 J
3.00 ×108ms−1
𝑣
627 ×10−9m = 4.78 × 1014 Hz
f =
𝜆 =
E = hf = 6.63 × 10−34 Js × 4.78 × 1014 Hz = 3.17 × 10−19 J
Number of photons in one minute =
3.17 ×10−19J = 2.1 × 1019
6.6 J
(Lower wavelength leads to) greater (photon) energy
15(b)[4]
λ = 2L used
Use of v = √( 𝑇
𝜇 )
Decrease in tension = 2.5 N
Example of calculation
(fλ)2 = T/μ
λ = 2L = 2 × 0.187 = 0.374 m
for 882 Hz, (882 Hz × 0.374 m)2 = T / 5.08 × 10−3 kg m−1
T = 552.8 N
for 880 Hz, (880 Hz × 0.374 m)2 = T / 5.08 × 10−3 kg m−1
T = 550.3 N
decrease in T = 2.5 N
Use of n1 sin θ1 = n2 sin θ2
16ai
with sin θ2 as 1
critical angle = 75.1(°)
Or
calculates ratio n2:n1
Use of sin C = 1/n
critical angle = 75.1(°)
Example of calculation
n1 sin θ1 = n2 sin θ2
1.48 × sin C = 1.43 × sin 90°
C = 75.1°
16aii
Angle of incidence measured/stated in range 7981°
This is greater than the critical angle
Total internal reflection takes place
(MP1 can be awarded for seeing angle correctly marked on diagram)
(If no angle of incidence measured, score 0)
(MP3 dependent upon awarding MP2)
(MP2 and MP3 can be awarded if angle of incidence is measured to be
between 76° and 85°)
(e.c.f. from (i))
Use of n = c/v with n = 1.48
16bi
Use of speed = distance / time
Time = 3.4 × 10−4 s
(Allow MP2 if using speed of light in a vacuum)
Example of calculation
v = c/n = 3.00 × 108 ms−1 / 1.48 = 2.03 × 108 ms−1
time = distance / speed = 70,000 m / 2.03 × 108 ms−1 = 3.45 × 10−4 s
(Lower RI leads to) lower critical angle
16bii
More light (totally internally) reflected
Or less light refracted
Or more of the incident light will hit the boundary at an angle greater
than the critical angle
(MP2 dependent on awarding MP1)
Use of P = VI
17ai
P = 0.11 (W)
(MP1 Allow methods where R is calculated and then either P = I2R or
P = V2/R is used to calculate P)
Example of calculation
P = VI = 12.0 V × 9.2 × 10−3 A = 0.11 W
17aii
Use of E = Pt to calculate energy of LED
Use of v = fλ and E = hf to calculate photon energy
Divides total energy in one minute by energy of a photon
Number of photons in one minute = 2.1 × 1019
(candidates who do not convert minutes into seconds can score a
maximum of 2 marks – MP2 and MP3)
(“show that” value leads to 1.9 × 1019)
(allow full e.c.f. from (i))
Example of calculation
E = Pt = 0.11W × 60 s = 6.6 J
3.00 ×108ms−1
𝑣
627 ×10−9m = 4.78 × 1014 Hz
f =
𝜆 =
E = hf = 6.63 × 10−34 Js × 4.78 × 1014 Hz = 3.17 × 10−19 J
Number of photons in one minute =
3.17 ×10−19J = 2.1 × 1019
6.6 J
(Lower wavelength leads to) greater (photon) energy
Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.

