Note AcademyNote Academy

Physics · May / June 2022 · Paper 61 · Question 4

YPH11

As printed in the paper

The question as text

4 A student measured a metal nut of the type shown below.

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 4(a)(i)[4]

    Digital calipers have a smaller resolution

    [Accept converse]

    Calculation of percentage uncertainty using (half) resolution shown

    %U for Vernier = 0.8% and %U digital = 0.08%

    Hence the percentage uncertainty for digital calipers will be smaller

    Example of calculation

    %U in Vernier reading = 0.05 / 6.6 × 100 = 0.8 %

    %U in digital reading = 0.005 / 6.58 × 100 = 0.08 %

  • 4(a)(ii)[2]

    Any PAIR from:

    Repeat at different orientations and calculate a mean

    Hence reduces (the effect of) random errors

    Or

    Check and correct for zero error

    [Accept suitable method]

    Hence eliminates systematic error

  • 4(a)(iii)[3]

    Mean d = 6.55 (mm)

    Calculation using half range shown

    [Accept furthest from mean]

    Uncertainty in d = 0.03 (mm)

    Example of calculation

    Mean d = (6.57 + 6.58 + 6.54 + 6.52) / 4 = 26.21 / 4 = 6.55 (mm)

    Uncertainty = (6.58 − 6.52) / 2 = 0.06 / 2 = 0.03 (mm)

    Calculation of U in s 2 or d 2 using 2 × %U shown

    Addition of U in s 2 and U in d 2 shown

    U = 0.011 (cm2)

    Example of calculation

    %U in s 2= 2 × (0.02 / 16.83) × 100 = 2 × 0.12% = 0.24 %

    U in s 2 = 1.6832 × 0.24 % = 6.80 × 10−3 cm2

    %U in d 2= 2 × (0.04 / 8.55) × 100 = 2 × 0.47% = 0.94 %

    U in d 2 = 0.8552 × 0.94 % = 6.87 × 10−3 cm2

    U in A = (6.80 × 10−3 × √3) / 2 + (6.87 × 10−3 × π) / 4

    = 5.89 × 10−3 + 5.40 × 10−3 = 0.011 cm2

    Or

    Use of correct absolute uncertainties for s and d

    Use of maximum and minimum values to calculate limit of A shown

    Correct value of maximum or minimum A

    Subtraction to obtain uncertainty in A approximately 0.01 cm2

    MP4 dependent on MP3

    Example of calculation

    minimum s 2 = (1.683 − 0.002)2 = 1.681 cm2

    maximum d 2= (0.855 + 0.004)2 = 0.738 cm2

    minimum A = √3 × 1.681/2 − π × 0.738/4 = 1.867 cm2

    uncertainty in A = 1.88 − 1.867 = 0.013 cm2

  • 4(b)[4]

    Digital calipers have a smaller resolution

    [Accept converse]

    Calculation of percentage uncertainty using (half) resolution shown

    %U for Vernier = 0.8% and %U digital = 0.08%

    Hence the percentage uncertainty for digital calipers will be smaller

    Example of calculation

    %U in Vernier reading = 0.05 / 6.6 × 100 = 0.8 %

    %U in digital reading = 0.005 / 6.58 × 100 = 0.08 %

    Any PAIR from:

    Repeat at different orientations and calculate a mean

    Hence reduces (the effect of) random errors

    Or

    Check and correct for zero error

    [Accept suitable method]

    Hence eliminates systematic error

    Mean d = 6.55 (mm)

    Calculation using half range shown

    [Accept furthest from mean]

    Uncertainty in d = 0.03 (mm)

    Example of calculation

    Mean d = (6.57 + 6.58 + 6.54 + 6.52) / 4 = 26.21 / 4 = 6.55 (mm)

    Uncertainty = (6.58 − 6.52) / 2 = 0.06 / 2 = 0.03 (mm)

    Calculation of U in s 2 or d 2 using 2 × %U shown

    Addition of U in s 2 and U in d 2 shown

    U = 0.011 (cm2)

    Example of calculation

    %U in s 2= 2 × (0.02 / 16.83) × 100 = 2 × 0.12% = 0.24 %

    U in s 2 = 1.6832 × 0.24 % = 6.80 × 10−3 cm2

    %U in d 2= 2 × (0.04 / 8.55) × 100 = 2 × 0.47% = 0.94 %

    U in d 2 = 0.8552 × 0.94 % = 6.87 × 10−3 cm2

    U in A = (6.80 × 10−3 × √3) / 2 + (6.87 × 10−3 × π) / 4

    = 5.89 × 10−3 + 5.40 × 10−3 = 0.011 cm2

    Or

    Use of correct absolute uncertainties for s and d

    Use of maximum and minimum values to calculate limit of A shown

    Correct value of maximum or minimum A

    Subtraction to obtain uncertainty in A approximately 0.01 cm2

    MP4 dependent on MP3

    Example of calculation

    minimum s 2 = (1.683 − 0.002)2 = 1.681 cm2

    maximum d 2= (0.855 + 0.004)2 = 0.738 cm2

    minimum A = √3 × 1.681/2 − π × 0.738/4 = 1.867 cm2

    uncertainty in A = 1.88 − 1.867 = 0.013 cm2

    Use of ρ = m / Ax

    ρ = 6.91 g cm−3

    [3 s.f. only]

    [Accept 6.92 g cm−3]

    Example of calculation

    ρ = 10.3 / (1.88 × 0.792) = 10.3 / 1.49 = 6.91 g cm−3

    Correct calculation of relevant limit using %U shown

    [e.c.f. (c)(i)]

    Conclusion based on comparison of limit and calculated ρ

    [MP3 dependent MP2]

    Example of calculation

    %U in ρ = (0.1 / 10.3) × 100 + (0.01 / 1.88) × 100 + (0.03 / 7.92) × 100

    = 0.97 % + 0.53 % + 0.38 % = 1.88 %

    Upper limit of ρ = 6.91 × (1 + 0.0188) = 7.04 g cm−3

    As the upper limit is lower than 7.85 g cm−3 the hexagonal metal nut is not

    made from steel.

    Or

    Use of maximum or minimum values shown

    Maximum ρ = 7.05 g cm−3

    Or

    Minimum ρ = 6.79 g cm3

    Conclusion based on comparison of maximum or minimum ρ with

    calculated ρ

    [MP3 dependent MP2]

    Example of calculation

    Maximum ρ = (10.3 + 0.1) / ((0.792 − 0.003) × (1.88 − 0.01) = 7.05 g cm−3

    As the maximum value is lower than 7.85 g cm−3 the hexagonal metal nut is

    not made from steel.

    Or

    Calculation of %U in ρ shown

    Correct calculation of relevant %D shown

    [e.c.f. (c)(i)]

    Conclusion based on comparison of %D and %U

    [MP3 dependent MP2]

    Example of calculation

    %U in ρ = (0.1 / 10.3) × 100 + (0.01 / 1.88) × 100 + (0.03 / 7.92) × 100

    = 0.97 % + 0.53 % + 0.38 % = 1.88 %

    %D = (7.85 − 6.91) / 7.85 × 100 = 12 %

    As % D for lower value is greater than the %U then the hexagonal metal

    nut is not made from steel.

    Pearson Education Limited. Registered company number 872828

    with its registered office at 80 Strand, London, WC2R 0RL, United Kingdom

  • 4(c)(i)[2]

    Use of ρ = m / Ax

    ρ = 6.91 g cm−3

    [3 s.f. only]

    [Accept 6.92 g cm−3]

    Example of calculation

    ρ = 10.3 / (1.88 × 0.792) = 10.3 / 1.49 = 6.91 g cm−3

    Correct calculation of relevant limit using %U shown

    [e.c.f. (c)(i)]

    Conclusion based on comparison of limit and calculated ρ

    [MP3 dependent MP2]

    Example of calculation

    %U in ρ = (0.1 / 10.3) × 100 + (0.01 / 1.88) × 100 + (0.03 / 7.92) × 100

    = 0.97 % + 0.53 % + 0.38 % = 1.88 %

    Upper limit of ρ = 6.91 × (1 + 0.0188) = 7.04 g cm−3

    As the upper limit is lower than 7.85 g cm−3 the hexagonal metal nut is not

    made from steel.

    Or

    Use of maximum or minimum values shown

    Maximum ρ = 7.05 g cm−3

    Or

    Minimum ρ = 6.79 g cm3

    Conclusion based on comparison of maximum or minimum ρ with

    calculated ρ

    [MP3 dependent MP2]

    Example of calculation

    Maximum ρ = (10.3 + 0.1) / ((0.792 − 0.003) × (1.88 − 0.01) = 7.05 g cm−3

    As the maximum value is lower than 7.85 g cm−3 the hexagonal metal nut is

    not made from steel.

    Or

    Calculation of %U in ρ shown

    Correct calculation of relevant %D shown

    [e.c.f. (c)(i)]

    Conclusion based on comparison of %D and %U

    [MP3 dependent MP2]

    Example of calculation

    %U in ρ = (0.1 / 10.3) × 100 + (0.01 / 1.88) × 100 + (0.03 / 7.92) × 100

    = 0.97 % + 0.53 % + 0.38 % = 1.88 %

    %D = (7.85 − 6.91) / 7.85 × 100 = 12 %

    As % D for lower value is greater than the %U then the hexagonal metal

    nut is not made from steel.

    Pearson Education Limited. Registered company number 872828

    with its registered office at 80 Strand, London, WC2R 0RL, United Kingdom

  • 4(c)(ii)[3]

    Digital calipers have a smaller resolution

    [Accept converse]

    Calculation of percentage uncertainty using (half) resolution shown

    %U for Vernier = 0.8% and %U digital = 0.08%

    Hence the percentage uncertainty for digital calipers will be smaller

    Example of calculation

    %U in Vernier reading = 0.05 / 6.6 × 100 = 0.8 %

    %U in digital reading = 0.005 / 6.58 × 100 = 0.08 %

    Any PAIR from:

    Repeat at different orientations and calculate a mean

    Hence reduces (the effect of) random errors

    Or

    Check and correct for zero error

    [Accept suitable method]

    Hence eliminates systematic error

    Mean d = 6.55 (mm)

    Calculation using half range shown

    [Accept furthest from mean]

    Uncertainty in d = 0.03 (mm)

    Example of calculation

    Mean d = (6.57 + 6.58 + 6.54 + 6.52) / 4 = 26.21 / 4 = 6.55 (mm)

    Uncertainty = (6.58 − 6.52) / 2 = 0.06 / 2 = 0.03 (mm)

    Calculation of U in s 2 or d 2 using 2 × %U shown

    Addition of U in s 2 and U in d 2 shown

    U = 0.011 (cm2)

    Example of calculation

    %U in s 2= 2 × (0.02 / 16.83) × 100 = 2 × 0.12% = 0.24 %

    U in s 2 = 1.6832 × 0.24 % = 6.80 × 10−3 cm2

    %U in d 2= 2 × (0.04 / 8.55) × 100 = 2 × 0.47% = 0.94 %

    U in d 2 = 0.8552 × 0.94 % = 6.87 × 10−3 cm2

    U in A = (6.80 × 10−3 × √3) / 2 + (6.87 × 10−3 × π) / 4

    = 5.89 × 10−3 + 5.40 × 10−3 = 0.011 cm2

    Or

    Use of correct absolute uncertainties for s and d

    Use of maximum and minimum values to calculate limit of A shown

    Correct value of maximum or minimum A

    Subtraction to obtain uncertainty in A approximately 0.01 cm2

    MP4 dependent on MP3

    Example of calculation

    minimum s 2 = (1.683 − 0.002)2 = 1.681 cm2

    maximum d 2= (0.855 + 0.004)2 = 0.738 cm2

    minimum A = √3 × 1.681/2 − π × 0.738/4 = 1.867 cm2

    uncertainty in A = 1.88 − 1.867 = 0.013 cm2

    Use of ρ = m / Ax

    ρ = 6.91 g cm−3

    [3 s.f. only]

    [Accept 6.92 g cm−3]

    Example of calculation

    ρ = 10.3 / (1.88 × 0.792) = 10.3 / 1.49 = 6.91 g cm−3

    Correct calculation of relevant limit using %U shown

    [e.c.f. (c)(i)]

    Conclusion based on comparison of limit and calculated ρ

    [MP3 dependent MP2]

    Example of calculation

    %U in ρ = (0.1 / 10.3) × 100 + (0.01 / 1.88) × 100 + (0.03 / 7.92) × 100

    = 0.97 % + 0.53 % + 0.38 % = 1.88 %

    Upper limit of ρ = 6.91 × (1 + 0.0188) = 7.04 g cm−3

    As the upper limit is lower than 7.85 g cm−3 the hexagonal metal nut is not

    made from steel.

    Or

    Use of maximum or minimum values shown

    Maximum ρ = 7.05 g cm−3

    Or

    Minimum ρ = 6.79 g cm3

    Conclusion based on comparison of maximum or minimum ρ with

    calculated ρ

    [MP3 dependent MP2]

    Example of calculation

    Maximum ρ = (10.3 + 0.1) / ((0.792 − 0.003) × (1.88 − 0.01) = 7.05 g cm−3

    As the maximum value is lower than 7.85 g cm−3 the hexagonal metal nut is

    not made from steel.

    Or

    Calculation of %U in ρ shown

    Correct calculation of relevant %D shown

    [e.c.f. (c)(i)]

    Conclusion based on comparison of %D and %U

    [MP3 dependent MP2]

    Example of calculation

    %U in ρ = (0.1 / 10.3) × 100 + (0.01 / 1.88) × 100 + (0.03 / 7.92) × 100

    = 0.97 % + 0.53 % + 0.38 % = 1.88 %

    %D = (7.85 − 6.91) / 7.85 × 100 = 12 %

    As % D for lower value is greater than the %U then the hexagonal metal

    nut is not made from steel.

    Pearson Education Limited. Registered company number 872828

    with its registered office at 80 Strand, London, WC2R 0RL, United Kingdom

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.