Note AcademyNote Academy

Physics · Oct / Nov 2021 · Paper 41 · Question 14

YPH11

As printed in the paper

The question as text

14 The train on a model railway is powered by contact with the rails. The train sometimes loses contact with the rails. The diagram shows a circuit that can maintain power for an electronic controller on the train even when the power is disconnected for a short time. The switch represents the contact between the train and the rails. switch To electronic 12 V controller

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 14(a)[3]

    The capacitor stores charge/energy

    (if the switch is open) the capacitor discharges through

    resistor/controller

    Or

    (if the switch is open) the p.d across the resistor/controller is

    maintained by the capacitor

    p.d. across capacitor will remain high enough to operate the

    controller for a short time

    Or

    current in circuit will remain high enough to operate the controller

    for a short time

    Or

    Use of ln 𝑉𝑉= ln 𝑉𝑉0 −

    𝑡𝑡

    charge/energy stored is limited and will only last for a short time

    𝑅𝑅𝑅𝑅

  • 14(b)[2]

    t = 24 s

    𝑡𝑡

    ln 4 = ln 12 −

    Example of calculation

    470 × 47 × 10−3s

    t = 24.3 s

  • 14(c)[4]

    Horizontal line of nonzero I from 0 to 20 s

    (Initial value of) I = 26 mA

    (From 20 s) approximate exponential decrease

    Approximately drops to 1/3 after about 44 s (24 s after start of

    decrease)

    ECF depending on calculation from (b)

    Example of calculation

    I = 12 V / 470 Ω = 0.026 A

    I / mA

    26

    0

    t / s

    20

    40

    15ai

    Use of FΔt = Δp and p = mv

    Or Use of F = ma and v = at

    v = 42 m s1

    109000 N × 2.9 s = 7500 kg × 𝑣𝑣

    Example of calculation

    v = 42 m s1

    15aii

    Use of Ek = ½ mv2 (ecf for v from part ai)

    Use of ΔEgrav = mgΔh

    It reaches the top of the tower as initial Ek = 6.6 ×106 J is greater

    than energy required, ΔEgrav = 6.0 × 106 J

    Or It reaches the top of the tower as it can reach a height of 90 m

    which is greater than the required 81 m

    Or It reaches the top of the tower because 42 m s1 is greater than the

    required speed of 40 m s1

    Or It reaches the top of the tower because speed at top is 13 m s1 so

    it is still moving

    (Do not award marks for use of equations of motion for uniform

    acceleration)

    𝐸𝐸𝑘𝑘= 7500kg × (42 ms1)2

    Example of calculation

    2

    Ek = 6.6 ×106 J

    ΔEgrav = 7500 kg ×9.81 m s2×81 m = 6.0 ×106 J

    Use of show that gives Ek = 6.0 × 106 J

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.