Note AcademyNote Academy

Physics · Oct / Nov 2021 · Paper 21 · Question 14

YPH11

As printed in the paper

The question as text

14 A gold leaf electroscope is used to demonstrate the photoelectric effect. When the zinc plate of the electroscope is given a negative charge, the conducting rod and gold leaf also become negatively charged. The gold leaf deflects away from the metal stem as shown. The deflection of the gold leaf depends on the amount of charge on the zinc plate and the conducting rod. zinc plate insulation conducting rod gold leaf A beam of ultraviolet radiation is incident on the zinc plate. The gold leaf immediately begins to fall back to the conducting rod.

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 14(a)[2]

    (In the wave model) energy is built up over time

    Or (in the wave model) the energy is spread across the wave

    So (photo)electrons would not be released

    immediately/instantaneously

    Or so (photo)electrons would be released after a time delay

    (MP1 – allow any wording indicating a time delay e.g. ‘slowly’)

    (MP2 – do not allow “photoelectric emission” unless it is directly

    linked to electron release)

    14bi

    Use of hf = Φ + ½mv2max

    Converts from eV to J

    Use of Ek = ½mv2 (with m = 9.11 × 10−31)

    Maximum speed of electrons = 7.3 × 105 ms−1

    Example of calculation

    Φ (in J) = 4.3 eV × (1.6 × 10−19 J eV−1) = 6.9 × 10−19 J

    hf − Φ = ½mv2 = (9.3 × 10−19 J) – (6.9 × 10−19 J) = 2.4 × 10−19 J

    2.4 × 10−19 J = ½ (9.11 × 10−31 kg) v2

    v = 7.3 × 105 ms−1

    14bii

    Lower work function (than zinc) would result in greater (maximum)

    speed (of electrons)

    Greater wavelength (of ultraviolet light) would result in smaller

    (maximum) speed (of electrons)

    Or to achieve greater (maximum) speed (of electrons), a smaller

    wavelength would be required

    The relative sizes of these changes are not known so no conclusion

    could be reached

    Or the first suggestion is correct, the second is incorrect

    (MP1/MP2 – ignore references to KE)

  • 14(b)(i)[4]

    (In the wave model) energy is built up over time

    Or (in the wave model) the energy is spread across the wave

    So (photo)electrons would not be released

    immediately/instantaneously

    Or so (photo)electrons would be released after a time delay

    (MP1 – allow any wording indicating a time delay e.g. ‘slowly’)

    (MP2 – do not allow “photoelectric emission” unless it is directly

    linked to electron release)

    14bi

    Use of hf = Φ + ½mv2max

    Converts from eV to J

    Use of Ek = ½mv2 (with m = 9.11 × 10−31)

    Maximum speed of electrons = 7.3 × 105 ms−1

    Example of calculation

    Φ (in J) = 4.3 eV × (1.6 × 10−19 J eV−1) = 6.9 × 10−19 J

    hf − Φ = ½mv2 = (9.3 × 10−19 J) – (6.9 × 10−19 J) = 2.4 × 10−19 J

    2.4 × 10−19 J = ½ (9.11 × 10−31 kg) v2

    v = 7.3 × 105 ms−1

    14bii

    Lower work function (than zinc) would result in greater (maximum)

    speed (of electrons)

    Greater wavelength (of ultraviolet light) would result in smaller

    (maximum) speed (of electrons)

    Or to achieve greater (maximum) speed (of electrons), a smaller

    wavelength would be required

    The relative sizes of these changes are not known so no conclusion

    could be reached

    Or the first suggestion is correct, the second is incorrect

    (MP1/MP2 – ignore references to KE)

  • 14(b)(ii)[3]

    (In the wave model) energy is built up over time

    Or (in the wave model) the energy is spread across the wave

    So (photo)electrons would not be released

    immediately/instantaneously

    Or so (photo)electrons would be released after a time delay

    (MP1 – allow any wording indicating a time delay e.g. ‘slowly’)

    (MP2 – do not allow “photoelectric emission” unless it is directly

    linked to electron release)

    14bi

    Use of hf = Φ + ½mv2max

    Converts from eV to J

    Use of Ek = ½mv2 (with m = 9.11 × 10−31)

    Maximum speed of electrons = 7.3 × 105 ms−1

    Example of calculation

    Φ (in J) = 4.3 eV × (1.6 × 10−19 J eV−1) = 6.9 × 10−19 J

    hf − Φ = ½mv2 = (9.3 × 10−19 J) – (6.9 × 10−19 J) = 2.4 × 10−19 J

    2.4 × 10−19 J = ½ (9.11 × 10−31 kg) v2

    v = 7.3 × 105 ms−1

    14bii

    Lower work function (than zinc) would result in greater (maximum)

    speed (of electrons)

    Greater wavelength (of ultraviolet light) would result in smaller

    (maximum) speed (of electrons)

    Or to achieve greater (maximum) speed (of electrons), a smaller

    wavelength would be required

    The relative sizes of these changes are not known so no conclusion

    could be reached

    Or the first suggestion is correct, the second is incorrect

    (MP1/MP2 – ignore references to KE)

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.