Note AcademyNote Academy

Physics · Oct / Nov 2021 · Paper 21 · Question 11

YPH11

As printed in the paper

The question as text

11 Diamonds, cubic zirconia and silicon carbide can be used as gemstones in jewellery. The speed of light in these materials is shown in the table. diamond cubic zirconia silicon carbide speed of light / m s−1 1.24 × 108 1.39 × 108 1.15 × 108

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 11(a)[3]

    Use of n1sinθ1 = n2sinθ2

    Use of n = c/v with c = 3.00 × 108 (m s−1)

    v = 1.4 × 108 (m s−1) so material is cubic zirconia

    (For MP1, allow use of n = sin i / sin r)

    (All marks can be achieved if candidate calculates n for all of the

    gemstones and compares to value calculated in MP1)

    Example of calculation

    n1sinθ1 = n2sinθ2, 1.00 sin (50°) = n2 sin (21°), n2 = 2.14

    n = c/v , so v = (3.00 × 108 m s−1) / 2.14 = 1.4 × 108 m s−1

    11bi

    Use of sin C = 1/ n where n = c/v

    Critical angle for diamond is 24°

    (40.5° > 24°) so diagram shows reflection at the boundary

    Ray completed showing TIR in correct direction by eye

    OR

    Use of n1sinθ1 = n2sinθ2

    n1sinθ1 = 1.57

    (sin θ2 > 1) so diagram shows reflection at the boundary

    Ray completed showing TIR in correct direction by eye

    (Only allow MP3 if TIR is drawn on the diagram, not just stated)

    Example of calculation

    sin C = 1/ n = (1.24 × 108 ms−1) / (3.00 × 108 ms−1) = 0.41.

    C = sin−1 (0.41) = 24°

    11bii

    Silicon carbide has a greater refractive index (than diamond)

    Or silicon carbide has a smaller critical angle (than diamond)

    Or critical angle for silicon carbide is 23°

    Or critical angle is still less than the angle of incidence

    Or sin θ2 is still > 1

    So total internal reflection (TIR) would (still) take place

    (MP2 dependent on MP1)

    (Calculation of n for silicon carbide not good enough for MP1)

  • 11(b)(i)[4]

    Use of n1sinθ1 = n2sinθ2

    Use of n = c/v with c = 3.00 × 108 (m s−1)

    v = 1.4 × 108 (m s−1) so material is cubic zirconia

    (For MP1, allow use of n = sin i / sin r)

    (All marks can be achieved if candidate calculates n for all of the

    gemstones and compares to value calculated in MP1)

    Example of calculation

    n1sinθ1 = n2sinθ2, 1.00 sin (50°) = n2 sin (21°), n2 = 2.14

    n = c/v , so v = (3.00 × 108 m s−1) / 2.14 = 1.4 × 108 m s−1

    11bi

    Use of sin C = 1/ n where n = c/v

    Critical angle for diamond is 24°

    (40.5° > 24°) so diagram shows reflection at the boundary

    Ray completed showing TIR in correct direction by eye

    OR

    Use of n1sinθ1 = n2sinθ2

    n1sinθ1 = 1.57

    (sin θ2 > 1) so diagram shows reflection at the boundary

    Ray completed showing TIR in correct direction by eye

    (Only allow MP3 if TIR is drawn on the diagram, not just stated)

    Example of calculation

    sin C = 1/ n = (1.24 × 108 ms−1) / (3.00 × 108 ms−1) = 0.41.

    C = sin−1 (0.41) = 24°

    11bii

    Silicon carbide has a greater refractive index (than diamond)

    Or silicon carbide has a smaller critical angle (than diamond)

    Or critical angle for silicon carbide is 23°

    Or critical angle is still less than the angle of incidence

    Or sin θ2 is still > 1

    So total internal reflection (TIR) would (still) take place

    (MP2 dependent on MP1)

    (Calculation of n for silicon carbide not good enough for MP1)

  • 11(b)(ii)[2]

    Use of n1sinθ1 = n2sinθ2

    Use of n = c/v with c = 3.00 × 108 (m s−1)

    v = 1.4 × 108 (m s−1) so material is cubic zirconia

    (For MP1, allow use of n = sin i / sin r)

    (All marks can be achieved if candidate calculates n for all of the

    gemstones and compares to value calculated in MP1)

    Example of calculation

    n1sinθ1 = n2sinθ2, 1.00 sin (50°) = n2 sin (21°), n2 = 2.14

    n = c/v , so v = (3.00 × 108 m s−1) / 2.14 = 1.4 × 108 m s−1

    11bi

    Use of sin C = 1/ n where n = c/v

    Critical angle for diamond is 24°

    (40.5° > 24°) so diagram shows reflection at the boundary

    Ray completed showing TIR in correct direction by eye

    OR

    Use of n1sinθ1 = n2sinθ2

    n1sinθ1 = 1.57

    (sin θ2 > 1) so diagram shows reflection at the boundary

    Ray completed showing TIR in correct direction by eye

    (Only allow MP3 if TIR is drawn on the diagram, not just stated)

    Example of calculation

    sin C = 1/ n = (1.24 × 108 ms−1) / (3.00 × 108 ms−1) = 0.41.

    C = sin−1 (0.41) = 24°

    11bii

    Silicon carbide has a greater refractive index (than diamond)

    Or silicon carbide has a smaller critical angle (than diamond)

    Or critical angle for silicon carbide is 23°

    Or critical angle is still less than the angle of incidence

    Or sin θ2 is still > 1

    So total internal reflection (TIR) would (still) take place

    (MP2 dependent on MP1)

    (Calculation of n for silicon carbide not good enough for MP1)

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.