Note AcademyNote Academy

Physics · May / June 2021 · Paper 61 · Question 4

YPH11

As printed in the paper

The question as text

4 A student measured some dimensions of a thick, circular lens. The diagram shows approximate values of these dimensions. x Diagram not to scale x ≈ 2 mm t t ≈ 1 cm d d ≈ 5 cm side view plan view

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 4(a)(i)[1]

    [Accept clear reference to range of micrometer as 25 mm]

    There may be a systematic error

  • 4(a)(ii)[2]

    Or

    there may be zero error (on the Vernier calipers)

    (Therefore) the values may not be close to the true value

    Or

    (therefore) there may be a constant value added to the

    measurements

  • 4(b)[2]

    Mean x = 2.12 (mm)

    Uncertainty of 0.02 (mm) from calculation of half range

    [Accept furthest from the mean]

    Example of calculation

    mean x = (2.11+2.10+2.13+2.14+2.11) mm/5 = 2.118 = 2.12

    mm

    Uncertainty = (2.14−2.10) mm/2 = 0.02 mm

  • 4(c)(i)[2]

    𝑑2+(𝑡−𝑥)2

    Use of n = 1 +

    8𝑓(𝑡−𝑥)

    Correct value of n to 2 or 3 s.f.

    [e.c.f (b)]

    Example of calculation

    𝑑2+(𝑡−𝑥)2

    5.102+(0.830−0.212)2

    26.01+0.6182

    n = 1 +

    8𝑓(𝑡−𝑥) = 1 +

    8×9.8×(0.830−0.212) = 1 +

    48.45

    = 1.54

  • 4(c)(ii)[2]

    Addition of U in t and U in x shown

    Conversion to %U to minimum 2 s.f.

    [e.c.f (b)]

    Example of calculation

    U = 0.01 + 0.02 = 0.03

    %U = 0.03 / (8.30 − 2.12) × 100% = 0.49 %

  • 4(c)(iii)[4]

    Use of 2× %U in d or 2× %U (t−x) shown

    [e.c.f (b)]

    Calculation of U in d 2 or U in (t−x)2 shown

    Addition of U in d 2 and U in (t−x)2 shown

    [do not penalise

    Correct value of U to minimum 3 s.f.

    if square root of final value is taken]

    Example of calculation

    %U in d 2 = 2 × (0.01/5.1 × 100) = 0.392%

    U in d 2 = 5.12 × 0.392/100 = 0.102

    %U in (t − x)2 = 2 × 0.49 = 0.98%

    U in (t − x)2 = 0.6182 × 0.98/100 = 0.004

    U = 0.102 + 0.004 = 0.106

    Correct calculation of %U in n shown

    [e.c.f. (c)(ii) and

  • 4(c)(iv)[3]

    (iii)]

    Calculation of relevant limit shown

    [e.c.f (c)(i)]

    Valid conclusion based on comparison of calculated values

    [MP3 dependent on MP2]

    Example of calculation

    %U = (0.106/26.4 × 100) + 0.485 + (0.3/9.8 × 100) = 0.402 +

    0.485 + 3.06

    = 3.95%

    Upper limit = 1.54 × 1.04 = 1.60

    Lower limit = 1.54 × 0.96 = 1.48

    The lens is most likely to be made of crown glass as it is the

    only value to fall within the range

    Or

    Correct calculation of %U in n shown

    [e.c.f. (c)(ii) and

    (iii)]

    Correct calculation of relevant %D shown [e.c.f (c)(i)]

    Valid conclusion based on comparison of calculated values

    [MP3 dependent on MP2]

    Example of calculation

    %U = (0.106/26.4 × 100) + 0.485 + (0.3/9.8 × 100) = 0.402 +

    0.485 + 3.06

    = 3.95%

    Crown glass %D = (1.54−1.52)/1.52 × 100 = 1.32 %

    Flint glass %D = (1.66−1.54)/1.66 × 100 = 7.23 %

    The lens is most likely to be made of crown glass as the %D

    is less than the %U whereas %D is larger than %U for flint

    glass.

    Total mark for Question 4 = 16

    Pearson Education Limited. Registered company number 872828

    with its registered office at 80 Strand, London, WC2R 0RL, United Kingdom

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.