Physics · May / June 2021 · Paper 41 · Question 17
YPH11
As printed in the paper
The question as text
17 A student investigated the properties of capacitors. The student connected a capacitor in series with a resistor. The capacitor was charged through the resistor by applying a potential difference (p.d.) using a battery of e.m.f. 6.0 V and negligible internal resistance. The capacitor was then discharged through the resistor. The p.d. across the capacitor was measured during the charging and discharging processes.
Read automatically from the paper; the printed page above is exact.
Show the answer and mark scheme
17(a)[3]
Battery in series with capacitor and resistorVoltmeter/datalogger/oscilloscope in parallel with capacitorAppropriate switching mechanism and discharge circuitcompleted
Example of diagram:
17(b)(i)[2]
Exponential declineSymmetry with charging curve, starts at 6.00 V, curves cross at3.00 V
Example of graph
Use of 𝐼𝐼= 𝐼𝐼0𝑒𝑒−𝑡𝑡𝑅𝑅𝑅𝑅 with V = IR
17(b)(ii)[3]
Apply total p.d. = sum of p.d.sSuitable algebra𝐼𝐼= 𝐼𝐼0𝑒𝑒−𝑡𝑡
Example of derivation
𝑅𝑅𝑅𝑅
𝑉𝑉R = 𝑅𝑅𝑅𝑅0𝑒𝑒−𝑡𝑡
𝑅𝑅𝑅𝑅
𝑉𝑉R = 𝑉𝑉0𝑒𝑒−𝑡𝑡
I0R = V0
𝑅𝑅𝑅𝑅
𝑉𝑉= 𝑉𝑉0 − 𝑉𝑉0𝑒𝑒−𝑡𝑡
𝑅𝑅𝑅𝑅
Vcap = V0 − VR
17(b)(iii)[4]
Use of V = V0 (1− 1/e) = 0.63 V0 for V at time constantRead time constant off graph = 4.9 s (allow range 4.5 s to 5.0 s)Use of time constant = RCC = 1.5 × 10−5 F, so choose 15 µF capacitor(C = 1.4 × 10−5 F to C = 1.5 × 10−5 F when rounded to 2 s.f.)
Or
Draws tangent to line at t = 0 s to intercept p.d. = 6.00 V lineRead time constant off graph = 4.9 s (allow range 4.5 s to 5.0 s)Use of time constant = RCC = 1.5 × 10−5 F, so choose 15 µF capacitor(C = 1.4 × 10−5 F to C = 1.5 × 10−5 F when rounded to 2 s.f.)
Or
Record corresponding values of V and t from point (or points)Use of 𝑉𝑉= 𝑉𝑉0 − 𝑉𝑉0𝑒𝑒−𝑡𝑡𝑅𝑅𝑅𝑅
on graph
Convert to correct logarithmic formC = 1.5 × 10−5 F, so choose 15 µF capacitor(C = 1.3 × 10−5 F to C = 1.5 × 10−5 F when rounded to 2 s.f.)
Or
𝑡𝑡1
2 = 𝑉𝑉0𝑒𝑒−
𝑅𝑅𝑅𝑅
𝑉𝑉0
2
Records time for V to increase to ½ 𝑉𝑉0 (3.4 s)RC = t½ / ln 2(allow range 3.0 s to 3.5 s)
C = 1.5 × 10−5 F, so choose 15 µF capacitor(C = 1.3 × 10−5 F to C = 1.5 × 10−5 F when rounded to 2 s.f.)
Example of calculation
V at time constant time = 0.63 × 6.00 V = 3.8 V
Time from graph = 4.9 s
4.9 s = C × 3.3 × 105 Ω
C = 1.48 × 10−5 F
17(b)(iv)[2]
Use of Q = CV (ecf for C from (iii))Q = 9.0 × 10−5 CExample of calculation
1.5 × 10−5 F × 6.00 V = 9.0 × 10−5 C
17(b)(v)[2]
Use of W = ½ CV2 (ecf for C from (iii))Or Use of W = ½ QV (ecf for Q from (iv))
Or Use of W = ½ Q2/C (ecf for C from (iii), for Q from (iv))
W = 2.7 × 10−4 JExample of calculation:
W = ½ × 1.5 × 10−5 F × (6.00 V)2 = 2.7 × 10−4 J
Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.

