Note AcademyNote Academy

Physics · May / June 2021 · Paper 41 · Question 13

YPH11

As printed in the paper

The question as text

13 The photograph shows a track for a toy car. The car moves down the track towards a circular loop. The loop starts at point A. release point C loop B track A D If the release point of the car is high enough, the car moves fast enough to pass point C and complete the loop, continuing to the end of the track at point D. If the release point is too low, the car falls off the track between point B and point C. Deduce whether a car released from a vertical height of 25 cm above point A will complete the loop and reach point D. You should assume that friction is negligible. vertical height of point C above point A = 22 cm mass of toy car = 33 g

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
Use of ∆Egrav = mg∆h
Idea that centripetal force at top of loop equals weight for

minimum speed

Use of F = mv2/r
Use of Ek = ½ mv2
Add Egrav at top of loop and required Ek

Or Subtract Egrav at top of loop from Egrav at launch

Or Subtract required Ek from Egrav at launch

(∆Egrav at start of) 0.081 J is less than 0.089 J (for sum of

Egrav at top of loop and required Ek, so insufficient energy),

so it does not complete the loop

Or (Height required of) 0.275 m is greater than 0.25 m,

(the height of launch position, so insufficient energy), so it

does not complete the loop

Or Ek at height of top of loop would be 0.0097 J which is

less than the required 0.071 J (so insufficient energy), so it

does not complete the loop

Or v at height of top of loop would be 0.77 m s–1 which is

less than the required 1.04 m s–1 so it does not complete the

loop

Or mv2/r = 0.18 N which is less than weight of 0.32 N so it

does not complete the loop

Do not credit parts of calculation or derivation unambiguously

using the formula for uniform acceleration v2 = 2as, i.e. if the

symbols are seen and substitution is from them and not from mg∆h

= ½ mv2

Example of calculation

∆Egrav at release point = 0.033 kg × 9.81 N kg–1 × 0.25 m = 0.0809 J

W = 0.033 kg × 9.81 N kg–1 = 0.324 N

At minimum speed W = mv2/r

0.324 N = 0.033 kg × v2 / 0.11 m

v = 1.04 m s–1

Ek = ½ × 0.033 kg × (1.04 m s–1)2 = 0.0178 J

∆Egrav at top of loop = 0.033 kg × 9.81 N kg–1 × 0.22 m = 0.0712 J

Total energy required to complete loop

= 0.0178 J + 0.0712 J = 0.089 J

0.0809 J < 0.089 J

Quest

ion

numb

er

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.