Note AcademyNote Academy

Physics · May / June 2021 · Paper 21 · Question 18

YPH11

As printed in the paper

The question as text

18 The circuit diagram shows three identical resistors and two switches, X and Y. The battery has negligible internal resistance. 12.0 V X Y Each resistor consists of a wire of diameter 0.181 mm and length 55.0 cm. At room temperature, the resistivity of the wire is 1.10 × 10−6 Ω m.

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 18(a)[3]

    Use of R = ρl / A

    R = 23.5 (Ω)

    (Units are in brackets, as this is a “show that” question, where the units

    have already been given in the question)

    (For a “show that” question, the answer needs to be given to at least one

    more significant figure than that given in the question, so an answer of

    24 Ω would not score MP3 unless it is shown to a greater number of

    significant figures beforehand)

    (If a candidate uses diameter instead of radius, MP2 can still be

    awarded if the substituted value for A is dimensionallycorrect)

    Example of calculation

    A = πr2 = π × (0.0905 × 10−3 m)2 = 2.57 × 10−8 m2

    R = ρl / A = (1.10 × 10−6 Ωm) × (0.550 m) / (2.57 × 10−8 m2)

    = 23.5 Ω

  • 18(b)[4]

    Maximum power when total resistance of circuit is the lowest

    Calculation of total resistance when X and Y are closed

    Use of P = V2/R

    Maximum power = 9W, which is less than 12 W, so student incorrect

    (allow full e.c.f. from (a), including situations where power is

    calculated to be more than 12W so student is correct)

    (MP1 and MP2 can be awarded if candidate clearly calculates the

    power when switches X and Y are closed with no explanation).

    (MP3 can be awarded when candidate has only switch X or switch Y

    closed)

    (For MP4 there needs to be a clear conclusion of whether the student is

    correct or incorrect)

    (Some students might calculate the power of each individual resistor

    when both switches X and Y are closed – this is an acceptable method

    that can gain full credit – look for 6W, 1.5W and 1.5W added to give

    9W)

    Example of calculation

    When X is closed, Rtot = 23.5 Ω + 23.5 Ω = 47 Ω

    When Y is closed, Rtot = 23.5 Ω

    When X and Y are closed, Rtot = (

    1

    23.5 Ω) −1 = 15.7 Ω

    1

    47 Ω+

    P = V2 / R, so greatest power when resistance is lowest,

    = (12.0 V)2 / (15.7 Ω) = 9.2 W

    (If using the “show that” value from (a), power = 9W)

  • 18(c)(i)[3]

    Use of R = V / I to calculate I

    Use of I = Q / t and number of electrons = Q / e

    Number of electrons = 3.2 × 1018 (no units)

    (allow full e.c.f. from (a))

    Example of calculation

    I = V / R = 12.0 V / 23.5 Ω = 0.511 A.

    Q = It (for 1 second) = 0.511A × 1.0 s = 0.511 C

    Number of electrons = 0.511 C / (1.60 × 1019 C) = 3.2 × 1018 electrons

    (if using the “show that” value from (a), answer = 3.1 × 1018)

  • 18(c)(ii)[3]

    Temperature of resistor increases

    Resistance of resistor increases

    Use of P = V2 / R to explain that power output falls

    (For MP3, allow use of P = VI as long as it is clear that I decreases)

    Example graphs for Q16b

    Pearson Education Limited. Registered company number 872828

    with its registered office at 80 Strand, London, WC2R 0RL, United Kingdom

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.