Note AcademyNote Academy

Physics · May / June 2021 · Paper 11 · Question 17

YPH11

As printed in the paper

The question as text

17 A pulley system is used to lift a 5.00 kN load through a height of 1.50 m. The system consists of one fixed pulley and the other pulley can move. The pulleys are connected by a nylon rope, as shown. fixed pulley supporting beam nylon rope Force F 5.00 kN load moving pulley 1.50 m The nylon rope will stretch when it is used in this way. The weight of the pulleys and the rope can be ignored, and you may assume that there is no friction in the pulleys. The properties of the nylon rope are: Young modulus of nylon 2.70 GPa overall length of rope before adding the load 6.00 m area of cross-section 3.00 × 10−4 m2

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 17(a)[2]

    The greater the length of the rope, the greater the extension for a given force

    Stiffness k = F / Δx so stiffness decreases (if extension increases).

    Use of 𝐸𝐸=

    𝜀𝜀 and 𝜎𝜎=

    𝐴𝐴 and 𝜖𝜖=

    𝜎𝜎

    𝐹𝐹

    ∆𝑥𝑥

  • 17(b)(i)[3]

    𝑥𝑥

    Use of 𝐹𝐹= 𝑘𝑘∆𝑥𝑥

    k = 1.35 × 105 (N m–1)

    Example of calculation

    2.70 × 109 N m−2 = F × 6.00 m ÷ (3.00 × 10−4 m2 × ΔL)

    ∆𝐿𝐿= 2.70 × 109 N m−2 × 3.00 × 10−4 m2

    𝑘𝑘= 𝐹𝐹

    F = (2.70 × 109 N m−2 × 3.00 × 10−4 m2 ÷ 6.00 m) × ΔL = k Δx

    6.00 m

    = 1.35 × 105 N m1

  • 17(b)(ii)[3]

    Correct use of factor of 2 to calculate F or Δx

    Use of ∆𝐹𝐹= 𝑘𝑘∆𝑥𝑥

    1.85 × 10−2 (m) (allow ecf from (i))

    Example of calculation

    ∆𝑥𝑥= 𝐹𝐹

    2 500 N

    𝑘𝑘=

    1.35 × 105 N m1 = 1.85 × 10−2 m

    F = 5 000 N/ 2 = 2 500 N

  • 17(b)(iii)[2]

    Use of ΔEel = ½ FΔx

    ΔEel = 23.1 J (allow ecf from (ii))

    Example of calculation

    ΔEel = 0.5 2 500 N 1.85 10–2 m = 23.13 J

  • 17(c)[2]

    Use of W = FΔs (to find the work done in lifting the load)

    Compares 7 500 J with their calculated value in b(iii) and draws suitable

    conclusion

    Example of calculation

    Work done by pulley system = 5 × 103 N × 1.5 m = 7 500 J

    23(.1) (J) << 7 500 (J) ⸫ not significant

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.