Note AcademyNote Academy

Physics · Oct / Nov 2020 · Paper 31 · Question 3

YPH11

As printed in the paper

The question as text

3 A student investigated how the power output of a solar cell is affected by temperature. The intensity of light incident on the solar cell remained constant. He used a square solar cell, as shown. The student determined the power output of the solar cell at different temperatures.

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 3(a)[2]

    Voltmeter connected in parallel to solar cell only
    Ammeter connected in series with the solar cell and resistor

    MP1 Accept voltmeter connected in parallel to the resistor only, if no

    other resistance components (e.g. variable resistor, bulb, etc) are added

    Additional cells added – Not MP2.

  • 3(b)[2]

    Max 2 from

    Same distance between lamp and solar cell
    Keep angle of solar cell to light the same
    Block background light

    Or control background light level

    Or avoid casting shadows on the solar cell

  • 3(c)[1]

    Suitable method to vary solar cell temperature

    e.g. immersion in a water bath,

    clamped a fixed distance from a hair dryer

    (must include a method, rather than just naming a heat source)

  • 3(d)[2]

    Use of P = VI
    P = 0.12 W

    Example of calculation

    P = VI

    P = 2.74V × 45×10–3A

    P = 0.12 W

  • 3(e)[3]

    Use of I = P / A
    Use of efficiency = useful power output / total power input
    Efficiency = 0.17 (17%)

    Allow ecf from 3(d) for useful power output

    For MP1 & 2 accept a calculation of power output per m2 and

    efficiency calculated using input of 200 W m–2

    For MP3 there should be no unit given or correct conversion to %

    Example of calculation

    I = P / A

    P = 200 W m–2 × (60×10–3)2

    P = 0.72 W

    Efficiency = useful power output / total power input

    Efficiency = 0.12 W / 0.72 W = 0.17

  • 3(f)(i)[2]

    Max 2 from

    Too few readings
    Too small a range of temperatures
    Inconsistent intervals in temperature readings
    Inconsistent d.p. in current values
  • 3(f)(ii)[3]

    Calculate output power for each temperature
    Plot graph of power (on the yaxis) against temperature (on the x

    axis)

    Calculate the gradient (which is the power change per 1˚C)

    OR

    Calculate output power for each temperature
    Plot graph of temperature (on the yaxis) against power (on the x

    axis)

    Calculate 1/gradient (which is the power change per 1˚C)

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.