Mathematics · Oct / Nov 2021 · Paper 51 · Question 7
YMA01
As printed in the paper
The question as text
7. P A (2m) B (3m) α Figure 4 One end of a light inextensible string is attached to a particle A of mass 2m. The other end of the string is attached to a particle B of mass 3m. The string passes over a small, smooth, light pulley P which is fixed at the top of a rough inclined plane. The plane is inclined to the horizontal at an angle α, where tan α = 3 4 Particle A is held at rest on the plane with the string taut and B hanging freely below P, as shown in Figure 4. The section of the string AP is parallel to a line of greatest slope of the plane. The coefficient of friction between A and the plane is 1 2 Particle A is released and begins to move up the plane. For the motion before A reaches the pulley,
Read automatically from the paper; the printed page above is exact.
Show the answer and mark scheme
7(a)[4]
(ii)
3
mg
−
T
=
3
ma
N.B. Ignore the labelling (i) and (ii)
R
=
2
mg
cos
α
Allow if this appears in (a).
1
F
=
R
2
Substitute for trig. and solve for a,
1
a
=
g
5
T = 12
mg (23.52m)
5
90
o
−
α
2 cos
T
OR
T
2
+
T
2
−
2
T
2
cos(90
o
+
α
)
OR
2
( cos
)
2
(
sin
)
2
T
α
+
T
+
T
α
Substitute for trig and T to obtain an expression in m or mg
48 5
mg ; Accept 4.3mg or better, 42m or 42.1m
25
Tension is the same on either side of the pulley, tension across the pulley is
the same.
B0 for tension is same for A and B or is the same for both strings etc
Notes for question 7
N.B. If m’s are consistently missing, mark (a) and (b) as a MR
7(a)
M1 Correct no. of terms, condone sin/cos confusion and sign errors
A1 Correct equation
M1 Correct no. of terms, condone sign errors
A1 Correct equation
N.B. Could have a replaced by (a) in both
7(b)
M1 Correct no. of terms, condone sin/cos confusion and sign errors
A1 Correct equation
B1 Seen, possibly on a diagram or in (a)
DM1, dependent on the two M’s in (a), for solving 2 simultaneous equations or
using a whole system equation to find a
A1 cao
DM1, dependent on the relevant 1st or 2nd M1 in (a), for attempt to find their T,
7(c)
must be of form km or kmg . Apply isw if they ‘cancel’ m’s.
M1 for a correct expression in terms of T and α only; α does not need to be
substituted
DM1, dependent on previous M, for substituting in their T and for trig, to give
an expression of form km or kmg
A1 cao
7(d)
B1 for any equivalent statement. B0 for incorrect extras.
Allow column vectors throughout.
i
j
i
j
v oe
7(b)[5]
R
=
2
mg
cos
α
Allow if this appears in (a).
1
F
=
R
2
Substitute for trig. and solve for a,
1
a
=
g
5
T = 12
mg (23.52m)
7(c)[4]
5
90
o
−
α
2 cos
T
OR
T
2
+
T
2
−
2
T
2
cos(90
o
+
α
)
OR
2
( cos
)
2
(
sin
)
2
T
α
+
T
+
T
α
Substitute for trig and T to obtain an expression in m or mg
48 5
mg ; Accept 4.3mg or better, 42m or 42.1m
25
Tension is the same on either side of the pulley, tension across the pulley is
7(d)[1]
the same.
B0 for tension is same for A and B or is the same for both strings etc
Notes for question 7
N.B. If m’s are consistently missing, mark (a) and (b) as a MR
7(a)
M1 Correct no. of terms, condone sin/cos confusion and sign errors
A1 Correct equation
M1 Correct no. of terms, condone sign errors
A1 Correct equation
N.B. Could have a replaced by (a) in both
7(b)
M1 Correct no. of terms, condone sin/cos confusion and sign errors
A1 Correct equation
B1 Seen, possibly on a diagram or in (a)
DM1, dependent on the two M’s in (a), for solving 2 simultaneous equations or
using a whole system equation to find a
A1 cao
DM1, dependent on the relevant 1st or 2nd M1 in (a), for attempt to find their T,
7(c)
must be of form km or kmg . Apply isw if they ‘cancel’ m’s.
M1 for a correct expression in terms of T and α only; α does not need to be
substituted
DM1, dependent on previous M, for substituting in their T and for trig, to give
an expression of form km or kmg
A1 cao
7(d)
B1 for any equivalent statement. B0 for incorrect extras.
Allow column vectors throughout.
i
j
i
j
v oe
Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.

