Note AcademyNote Academy

Chemistry · Oct / Nov 2024 · Paper 31 · Question 2

YCH11

As printed in the paper

The question as text

2 A student carried out an experiment to find the enthalpy change of neutralisation between a solution of sodium hydroxide and hydrochloric acid. 25.00 cm3 of sodium hydroxide solution was pipetted into a polystyrene cup. 5.00 cm3 portions of 2.00 mol dm−3 hydrochloric acid were added at regular intervals and the maximum temperature of the reaction mixture measured after each addition. 45 46 burette 47 48 49 50 clamp thermometer polystyrene cup A graph of the results is shown. 27 26 25 24 23 Temperature / C 22 21 20 19 18 17 0 5 10 15 20 25 30 35 40 45 50 3 Volume of HCl / cm

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 2(a)(i)[3]

    two lines of best fit

    NB lines do not need to be extrapolated beyond the intercept

    Comment: Allow the righthand straight line to be a curve but no M1

    for a straight line on the lefthand side

    22.0 (cm3)

    reading of volume at intersection

    Accept values between 20.0 and 23.0

    (25.2 – 17.5 =) 7.7

    calculation of maximum temperature

    Allow values between 7.5 and 7.9

    change

    Example of calculation

  • 2(a)(ii)[2]

    moles of hydrochloric acid

    (22 × 2.0) ÷ 1000 = 0.044 (mol)

    Allow answers in the range 0.040 − 0.046

    TE on 2(a)(i)

    Ignore SF

    0.044 ÷ 0.025 = 1.76 (mol dm−3)

    concentration of sodium hydroxide

    Allow answers in the range 1.60 − 1.84

    TE from M1 to M2

    Ignore SF

    If given, units must be correct

  • 2(a)(iii)[4]

    Example of calculation

    stating or using the equation

    ΔH = (−)mcΔT

    substitution into the equation

    −(22 + 25) × 4.18 × 7.7 = (−)1512.7 (J)

    Allow answers in the range 1410 − 1593

    TE on 2(a)(i) or answer −17.5

    1512.7 ÷ 0.044 = (−)34380 (J mol−1)

    calculation of enthalpy per mole

    Allow answers in the range 30652 − 36200

    TE on 2(a)(ii) and M1

    conversion to kJ mol−1

    −34.4 (kJ mol−1)

    and

    Allow answers in the range −32.7 to −36.2

    negative sign

    TE on M2

    Ignore SF except 1SF

    TE throughout

    Correct answer with some working scores 4

    An answer that makes reference to two of the following points:

  • 2(b)[2]

    heat loss (to the environment)

    Ignore nonstandard conditions

    the total volume increases so the temperature change is

    less even though the same amount of heat is evolved

    the solution is added in (small) portions

    Allow incomplete mixing / not stirred

    OR

    the solution is added too slowly

    Ignore heat capacity/ density are different to water

    Ignore incomplete reaction, evaporation and

    impurities

    Do not award incomplete combustion (lose 1 mark)

    An answer that makes reference to the following point:

  • 2(c)(i)[1]

    (restart the experiment and) add the estimated volume

    Allow add acid in smaller portions (near the end

    to the endpoint in one portion

    point)

    Allow acid in smaller intervals

    Ignore dilute acid

    An answer that makes reference to the following point:

  • 2(c)(ii)[1]

    add insulation / lid to reduce heat loss

    Ignore draught shield/shielding

    OR

    add acid quickly

    Allow increased mixing/swirling

    Ignore digital thermometer

    OR

    add acid in larger portions

    Ignore increase concentration

    (Total for Question 2 = 13 marks)

    An answer that makes reference to the following points:

    Example of a diagram:

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.